The very best solution in the market is what the dealers use. John Deere dealers use a combination of PC-based computer with two critical components – John Deere Service Advisor software and the John Deere EDL v2 Adapter. The EDL v2 adapter looks like the picture shown below. It comes with a hard carry case, the adapter itself, a 9-pin connector, and the USB cable. This tool is available for purchase from our website as well.
The John Deere EDL Adapter also has a variety of “extra” cables you can purchase, almost all of which are for some of the much older equipment. You can see all of the available cables on our website Autonumen.com
How to use John Deere Service Advisor
John Deere Service Advisor is a software tool used to diagnose and troubleshoot issues with John Deere machinery. Here are the steps to use it:
1. First, you need to have access to the John Deere Service Advisor software. You can purchase a license from a John Deere dealer or through their website.
2. Once you have the software installed on your computer, connect your John Deere machinery to your computer using a compatible data cable.
3. Launch the John Deere Service Advisor software and select the appropriate machine model and serial number.
4. The software will then run diagnostic tests on the machine and provide you with information about any issues it has detected. You can use this information to diagnose the problem and determine what repairs need to be made.
5. The software also provides repair procedures and technical information to help you fix the issue.
6. Follow the repair procedures provided by the software to make the necessary repairs.
7. Once the repairs are complete, the software can be used to clear any fault codes and verify that the issue has been resolved.
It’s important to note that John Deere Service Advisor is a powerful tool and should only be used by trained professionals who are familiar with the operation of John Deere machinery. If you’re not comfortable using the software or unsure about any aspect of the repair process, it’s best to consult with a John Deere dealer or certified technician.
Leave a Reply