Category Archives: Heavy Duty Diagnostic

  • 0

WIFI Caterpillar ET3 Adapter III 317-7485 to replace bluetooth CAT ET Adatper III

WIFI CAT ET III diagnostic interface has been released, this new wireless cat et adapter iii can be used to replace the old bluetooth cat et adapter iii, as bluetooth cat et apdater iii has stopped prodution and not available in the market any more.

CAT Communications Adapter III 317-7485 is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.
s
Real 2015A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks.

Software version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program allows adapter firmware upgrades as additional features become available;
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

If you are interested in this new WIFI CAT ET III diagnostic interface, please visit Autonumen.com or contact us, then we will be happy to give you the best offer and service.


  • 0

2018A Version CAT Caterpillar ET Diagnostic Adapter III

We will install the software before ship, so you can get it work directly after you receive it.
2018A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2018A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2018.

Cat et Caterpillar Electronic Technician Software 2018A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2018A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)
Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.
2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.

Package 1 :

1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)

Package 2:
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck,optional)


  • 0

John Deere Service Advisor with Nexiq clone 90% Worked

FYI, John Deere Service Advisor 90% works with Nexiq China clone.

Topic 1: John deere SA possible with NEXIQ USB Link?

It is possible to install Professional Diagnostic Tools John Deere Service Advisor on your laptop, though the installation is really complicated. If you have a Lenovo Thinkpad laptop, the easiest way is to restore the main partition from the image of my computers’ c: drive. And every time i change my laptop, i just restore it.

Win7 installed and fully updated. It takes hours.

The image will not work on XP, but SA works fine. My suggestion, buy used Lenovo T400 or T500. it’s more or less 250 EURO in Europe. Install windows 7 and then can put my image. Takes 10 minutes and u have SA working.

Topic 2: How to get Nexiq china worked?
I spent a month doing research on this and i managed my Heavy Duty Truck Scan Tool Nexiq to work 90%. The thing is that Nexiq has only 2 channels while EDL has 3. The 3rd one is Powertrain and it is used very seldom. E.g. I reprogrammed all the controllers on 6690 premium except two, but found a way around it opening the pld file with pld editor and changing Powertrain channel to Vehicle (channel 1). Lots of machines don’t even have a 3rd Powetrain channel. Like all 5R; 6115R, 6125R, 7280R….. From my experience only the older machines have it and still can be programmed most of the time. Programming controllers is easy, but diagnostics is a bit annoying. Every time you establish the connection u have to remove the USB plug and plug it again for the readings to appear. Connection establishment is taking a long long time and you never see the ECU. Only all the other controllers. So all the time something doesn’t work. If you are prepared for this here is what you have to do:

a) Rewire the the cables as shown in the picture in my post here:
I switched places channel 1 with channel 2 (see the pic) with my Chinese version and now it works fine, probably it was possible to do it adjusting the software settings as mentioned above, but i tried a lot, and nothing helped. Now i can connect, tried with 6125R and 5070M. Works fine!!! Except one very important thingy. After i establish the connection, all the reading give the same meaningless number. Then, I discovered accidentally, I pull out the USB cable, get the message “Connection interrupted” I put it back in, get the message “Connection resumed” and wuolla, all the readings show up immediately.

b) You don’t have to change the firmware. Both will work pretty much the same but with different issues.

P.S. For diagnostics only, there is a subprogram of SA that works without any cable rewiring, it doesn’t have a Program Controller option, and you still need to reinsert the usb after connection has been established. You just need to select the right port (which is usually 1939ImplementAutoboud or 1939AppAutoboud depending on the machine) and model. If you have SA, you will find the software at c:\Program Files\Service ADVISOR\xvds\XJDET.exe
Just to let you know, after a year working like that, i bought another EDL (recommended by a folk in the forum, much much much more than the old one)
So much relief


  • 0

Thy way to get CAT Caterpillar ET 2014A License Key

Caterpillar Diagnostic Tool is Caterpillar Vehicle interaction Adapter, Caterpillar vans Diagnostic instrument. Caterpillar et software program 2014B is out there to multi-languge. Caterpillar et help support specialists to reprogram ECMs, reconfigure handle process parameters.

Thy solution to get CAT Caterpillar ET 2014A License Important at [url=file:///C:/Documents%20and%20Settings/Administrator/%E6%A1%8C%E9%9D%A2/autonumen%208-2-2/www.autonumen.com]autonumen[/url]

step1: caterpillar open electronic technician

phase 2: caterpillar digital technican asks for license

action three:caterpillar et 2014a asks for licensing

step four:copy license code

stage 5: open cat ET essential 2014a

step 6: open et2k9c.kg

action 7: caterpillar ET 2014a paste license code

move eight: caterpillar et 2014a pick membership

step 9:caterpillar et2010a copy license vital

step ten: caterpillar ET 2014a duplicate license vital

phase 11: paste license crucial in th following box

action twelve: Click authorize

stage thirteen:caterpillar et 2014a copy license granted


  • 0

John Deere Service Advisor Keygen Crack

1.John Deere Service Advisor License
2.John Deere Service Advisor Keygen Cracked

 John Deere Service Advisor License

John deere payload encryptor-decryptor + keygen * Decrypt PayLoad (PLD) file to txt/ini format; * Modify PLD file expiration; * Modify PLD factory options such as speed limit (for example change 40 km/h to 50 km/h); * Adjust PLD file to different product serial; * Encrypt PLD file; * Program controller with modified PLD using Service ADVISOR; * Support Windows 2003/XP/Vista/7/8. ?When you send us receipt of payment, The keygen link will send you immediately by e-mail FULL UNLOCK(UNLIMITED PC,UNLIMITED INSTALL,UNLIMITED DATE) Contact Information: my email: Skype: autotruckepc Web site: If you have any problem, please do not hesitate to contact us. Shipment Note: If your package shipped by Express Delivery, please give us a valid delivery phone number, and also a full and accurate shipping address. Free casino games download for mac. Sycode

Top spin 4 pc. I am so happy when you connect to my website. Do you have what it takes to rise above the competition and become #1 in the world?

John Deere Service Advisor Keygen Cracked

Mar 21, 2017 – A dive into the thriving black market of John Deere tractor hacking. Here with cracked Ukrainian John Deere software that they bought off the black market’. John Deere Service Advisor: A diagnostic program used by John. New offline version of dealer technical service system for construction and foresty John Deere equipment Service Advisor 5.2.431. John Deere Service Advisor 5.2.


  • 0

CAT Caterpillar ET is really a exceptional obd2 solution

As a excellent obd2 solutions,CAT Caterpillar ET Diagnostic Adapter features a potent function.it not just can Show “Logged Occasion Codes” to show engine more than speeds,Higher temperatures, fuel consumption but also can view ECM’s existing configuration and adjust user settings,perform diagnostic tests and calibrations, and calibrate.Electro-mechanical and electro-hydraulic elements .

Is the Cat Comm III compatable using the computer software CAT Caterpillar ET 2011B Is this an actual caterpillar portion or even a knock off? Thanks.Yes, this is really the genuine CAT adapter, It’s also the ONLY advisable adapter for CAT ET, but obviously other ones will perform. It will function fine for the version you may have, and 2011C is actually the newest version.

What exactly is the distinction between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit perform with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks. CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines – Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.

Does this operate with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.If those Professional Diagnostic Tools use CAT Electronic Technician (CAT ET) for the application, it’s going to perform. Can the cat communicate 3 also be used to read detroit and cummins engines if I have the correct software? Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.

More similar items can be found on www.autonumen.com and any problem please feel free contact us.


  • 0

John Deere Service Advisor 5.2.467 2019 Construction and Forestry Equipment

Important Notice. Installation and activation are possible only with remote assistance using Teamviewer.

You are buying John Deere Service Advisor v5.2 for Construction and Forestry equipment online on USB HDD with international delivery or easy digital download! If you want to download the program. The download link along with PDF instruction file emailed to your email address within 2 hours (up to 12 hours in a weekend) of your purchase. If you would like the same software shipped to you on a USB HDD please select appropriate delivery method during checkout.

The Heavy Duty Truck Scanner John Deere Service Advisor combines several versions of the program. As well as a number of related programs and diagnostic equipment

For Agriculture division please check the John Deere Service Advisor 5.2 2018 Agriculture Equipment Division product link

Before you proceed, please check the product requirements below.

John Deere Service Advisor 5.2 System requirements:

– O.S.: Windows 7 Pro/Ultimate; Windows 8 Pro, Windows 8.1 Pro, Windows 10 Pro/Home

– CPU: Any CPU for Windows platform

– RAM: 8 GB of system memory (Recommended), 4 GB is the Minimum required amount.

– Hard Drive: 150 GB of available space + ~110 Gb for the setup files if you want to Download the software.

JD Service Advisor v5.2 support only Genuine JD EDL V3/V2 DLA Adapter kit (The previous version V2 USB and BT is also supported). If you’re using any other diagnostics tool we do not make any warranties

The new version of Service Advisor comes as a complete solution for those who do a repair, diagnostics, and maintenance of all John Deere construction and forestry equipment. It’s completely different from its previous version 4.2. JD Service Advisor functions are available from Internet Explorer Web browser. At this moment this is only one officially supported browser version. To start work with any model, you need to enter the model name or its PIN.

Available program futures divided into a few main sections: – Manuals – Reprogramming – Diagnostics

Manuals Section. First of all, most of the manuals now have a more convenient web interface and you can read/print all you want using Internet Explorer. A part of the manual is still available as pdf files only. So you need Adobe Reader installed.

Reprogramming section requires dealer credentials to access the payload database. At this moment this future is not available.

Diagnostics section. The avaiable menus are

– Codes – Readings – Controllers – Observed Symptoms – Tests – Calibrations


  • 0

John Deere Service Advisor 5.2.467 2019 Agriculture Equipment Division

Par emilyzhang dans Accueil le 30 Juin 2019 à 05:28

A brand new version of John Deere Service Advisor 5.2 for AG equipment is an offline application, that use Internet Explorer browser to communicate with the user.

JOHN DEERE SERVICE ADVISOR AG 5.2 SPANISH (ESPA?OL) 02/2018 version is also available. Please indicate the preferred language in the comment field during the checkout process.

Important Notice. Installation and activation are possible only with remote assistance using Teamviewer.

Unlike the previous version (John Deere Service Advisor 4.2) to work with the application you need:

Internet Explorer 11 (The shell)
Last version of Adobe PDF reader (you will be asked to download the last version before the installation process begin)
Last version of Java runtime environment (you will be asked to download the last version before the installation process begin)

John Deere Service Advisor 5.2 System requirements:

– O.S.: Windows 7 Pro/Ultimate; Windows 8 Pro, Windows 8.1 Pro, Windows 10 Home/Pro
– CPU: Any CPU for Windows platform
– RAM: 8 GB of system memory
– Hard Drive: 150 GB of available space

JD Service Advisor v5.2 support only Genuine JD EDL V3 DLA Adapter kit (The previous version V2 USB and BT is also supported). If you’re using any other diagnostics tool we do not make any warranties

The represented version of SA 5.2 allows you:

to start the offline version with an active internet connection
The license lasts for 3 years instead of 3 months
Windows 10 is fully supported by EDL v2/v3 kit

Here is the list of the models included in Heavy Duty Truck Scanner Service Advisor 5.2 AG and Turf Equipment. If your model is not listed, please contact us, as some models might be missing in the product description.

The John Deere Service Advisor combines several versions of the program. As well as a number of related programs and diagnostic equipment


  • 0

CAT Caterpillar ET is really a exceptional obd2 solution

As a excellent obd2 solutions,CAT Caterpillar ET Diagnostic Adapter features a potent function.it not just can Show “Logged Occasion Codes” to show engine more than speeds,Higher temperatures, fuel consumption but also can view ECM’s existing configuration and adjust user settings,perform diagnostic tests and calibrations, and calibrate.Electro-mechanical and electro-hydraulic elements .

Is the Cat Comm III compatable using the computer software CAT Caterpillar ET 2011B Is this an actual caterpillar portion or even a knock off? Thanks.Yes, this is really the genuine CAT adapter, It’s also the ONLY advisable adapter for CAT ET, but obviously other ones will perform. It will function fine for the version you may have, and 2011C is actually the newest version.

What exactly is the distinction between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit perform with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks. CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines – Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.

Does this operate with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.If those Professional Diagnostic Tools use CAT Electronic Technician (CAT ET) for the application, it’s going to perform. Can the cat communicate 3 also be used to read detroit and cummins engines if I have the correct software? Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.

More similar items can be found on www.autonumen.com and any problem please feel free contact us.


  • 0

CAT Caterpillar ET Adapter III is the latest generation of the Communication Adapter group

CAT Caterpillar ET Adapter III is the latest generation of the Communication Adapter group,and replaces the for CAT Comm Adapter II. This is the only recommended communication device for CAT,and the only datalink device that will allow you to properly communicate with a for CAT engine on dual datalinks. This function is needed for some ET (Electronic Technician) functions.

10.1

CAT Caterpillar ET Diagnostic Adapter III Compatible Vehicle: For Trucks, Excavators, Air Compressors, Ships, Drilling Rigs.

2018C Version CAT Caterpillar ET Diagnostic Adapter III software With ET Keygen was unlocked.

Here is the steps to teach you how to install and activation Cat ET SOFTWARE.

10.2

1. It is recommended to install the software on the WIN7 system. After installing the x86 or x64 installation files according to the system, run the cat 2018C software “ET 2018C v1.0” to select the language for installation.

2. Run 0-HWID to get the ID.

3. Run “1-Keygen-License-Maker”, fill in the ID to create the “keygen.key” file, and create a new folder in the root directory of the C drive: “FlexLM”, copy “keygen.key” into “FlexLM”.

4. Run “2-Keygen” and fill in the ID to create the “activation.key” file.

5. Drag the created “activation.key” file into “3-Key_Installer” and it will be installed.

6. my computer, right click on the properties – Advanced system settings – Advanced – Environment Variables – New variables under System Variables – new
Fill in:
Variable name: CALTMD_LICENSE_FILE
Variable value: C:\flexlm\license.dat

7. Run the installation license.

If you have problem to install CAT Caterpillar ET Diagnostic Adapter III software, You can watch check this link to watch the video. It will teach you how to install.