Porsche PIWIS TESTER III

  • 0

Porsche PIWIS TESTER III

Allscanner VXDIAG Porsche Piwis III with Lenovo T440P Laptop  Porsche Piwis tester III V37.250.020

NOTE:
1.Allscanner VXDIAG Porsche Piwis III has the same functions with Porsche Piwis
2.If you want to do online programming,you must have an account online.
25.1
From autonumen.com VXDIAG Porsche Piwis III Functions & Features:
1.New operation system and more intuitive diagnostic interface
2.New VCI for post-2018 vehicles with DoIP diagnosis
3.Good at maintenance, repair, control units change and programming & setting codes
4.To login for online immobilizer programming
5.To find out leading faults
6.To look for maintenance wiring diagram
7.To support special functions like modification or flashing, with Engineering mode (Development version)
25.2
VXDIAG Porsche Piwis III New & Old Cars:
All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera

especially the latest models:
Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models
25.3


  • 0

Porsche Piwis II V14. three hundred and fifty computer software Tester II

Porsche piwis tester 2 Help Devices:

SERP automatio tranny, air-conditioner, SRS, ABDOMINAL MUSCLES, ASR, MPL, GM, Authentic antitheft Program, KEYLESS MOVE program, OBDII program.
Porsche Piwis Tester II Options:

a single. Read/clear fault program code, snatch info supply, laptop or computer legitimate go with, component check, protection info consult, components site pulling, wires diagram.
two. For Porsche Piwis Tester ii works with this old and also latest for Porsche vehicles. This has this Panasonic laptop computer and also authentic computer software with the check. for Porsche Piwis Tester II can assist you analyze and also software probably the most different and also old variety for Porsche vehicles. As an example: 911(997)(991), Boxster/Cayman, (987), Cayenne as long as MY OWN the new year, Cayenne by MY OWN 2011 and also Panamera.
3 or more. Different Panamera might exclusively be diagnosed by making use of for Porsche Piwis Tester II. Based on recent job setting up, most of sooner car designs can little by little be improved onto the modern for Piwis Tester through the finish with the new year. For Porsche Piwis Tester I have to be applied for older designs within the for Porsche class until finally finish with the new year.
four. Help for Porsche. Porsche Piwis may don’t be on the market as soon as the earlier diagnostic routines have been transported for Porsche Piwis Tester II.
5 various. When for Professional Diagnostic Tools Porsche Piwis Tester II V14 can be sent out, it will consist of a single fundamental piece of computer software. It is necessary so that you can start and also configure this tester.


  • 0

Porsche Piwis Tester III with Panasonic CF54 Piwis3 PT3G Ver 37.250.020

Porsche Piwis Tester III with Panasonic CF54 Piwis3 PT3G Ver 37.250.020

Porsche Piwis Tester III is the newest fully operational diagnostic equipment based on PIWIS vehicle interface and Porsche software. Piwis Tester III provides exclusive support for Panamera G2, Cayenne E3 and all 2017 model range and above also provides legacy support for older models.

It is the new third generation Porsche diagnostic tool, it’s update to modern user interface, more faster performance, also have: license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work.
14.1

Version: 37.250.020
License: Unlimited
Update: Via DVD or Online
Support Online Programming, no develop mode
Multi-Languages Add Slider WD
14.2

Porsche Piwis Tester III main functions
• General ECU diagnostics (DTC read/clear)
• Guided fault finding
• ECU programming/coding
• Real-time control parameters display
• Electrical schematics mapping

Porsche PIWIS 3 advantages
• Exclusive support for 2017 model range and above (Panamera G2, Cayenne E3)
• Fast and stable connection Simulation mode (diagnostic session without VCI connection)
• End user capable DVD update
• Wired USB connection


  • 0

Porsche PIWIS TESTER III

Allscanner VXDIAG Porsche Piwis III with Lenovo T440P Laptop  Porsche Piwis tester III V37.250.020

NOTE:
1.Allscanner VXDIAG Porsche Piwis III has the same functions with Porsche Piwis
2.If you want to do online programming,you must have an account online.
5.1
From autonumen.com VXDIAG Porsche Piwis III Functions & Features:
1.New operation system and more intuitive diagnostic interface
2.New VCI for post-2018 vehicles with DoIP diagnosis
3.Good at maintenance, repair, control units change and programming & setting codes
4.To login for online immobilizer programming
5.To find out leading faults
6.To look for maintenance wiring diagram
7.To support special functions like modification or flashing, with Engineering mode (Development version)
5.2
VXDIAG Porsche Piwis III New & Old Cars:
All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera

especially the latest models:
Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models
5.3


  • 0

Porsche Piwis Tester II V14.000 with CF30 Laptop at autonumen.com

Porsche piwis tester ii is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access

Porsche Piwis Tester II Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year Porsche car models


  • 0

Porsche Piwis Tester II V14.000 with CF30 Laptop at autonumen.com

Porsche piwis tester ii is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access

Porsche Piwis Tester II Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year Porsche car models


  • 0

Porsche Piwis Tester 2 Online Coding Guide

Porsche Piwis online programming account service is piwis porsche subscription and piwis tester 2 online coding service offer via teamviewer. Porsche piwis coding account need to work with autonumen.com Porsche PIWIS tester 2 diagnostic tool. Porsche Piwis 2 online coding one time for one module of Porsche car coding.

Many customer inquiry about how to do online coding via piwis II, here we share Piwis II Online programming guide as following.

What need prepare for Piwis II online programming?

1.Original plan Porsche Piwis 2 inluded OBD & USB cable
2.Original XP system Piwis Tester II software running on laptop compatible with piwis II
3.One Porsche Car from 1996-2017 (vehicle support OBDII protocol )

If customer need original plan Porsche piwis II with laptop Piwis II software installed full set, just order here>>

14823129183 Porsche Piwis Tester 2 Online Coding Guide

When you keep all mentioned above ready for Porsche Piwis II online programming, just check and following below guide;

How does piwis II online coding service?

Step 1: Prepare Porsche Car information:

Excellent network performance is most important
Car model, Year
VIN number
What module need coding

Step 2: Order piwis II one time online programming here>>

Step 3: Due to time difference, pls keep your order number contact email sales@autonumen.com  appointment online programming available time in advance.

Step 4: Connect car to Porsche Piwis Tester and laptop, send us teamviewer id and password during appointment time for online coding service offering.

Step 5: Waiting for online programming till coding finished, and check and confirmed.

autonumen.com kindly note:

1. We do not offer Porsche Dealer Account login service.

2. We offer one time Piwis II online programming service from dealer account login till module coding be finished successful.

3. Piwis II online programming one time only for one module as usual, if customer need coding several module of cars, pls inquiry our sales for how many times Porsche piwis online coding service you need order.

With Porsche diagnostic tool online coding account, customers can activate the Porsche PIWIS tester2 vci online program function, any question about the Porsche piwis ii online coding account service just contact us freely.


  • 0

Porsche Piwis Tester II V12.100 Version Released

Piwis Tester II v12.100 Version released today!

In this new version we can find the latest type Porsche car which is able to be diagnostic till 2014 year. This is 2013.4 version software.

How to upgrade the Piwis tester II from old version:

If you purchased the old version from us, we can provide you upgrade DVD, after you received it, just put the DVD into DVD Rom of your Panasonic CF-30 laptop, then click the upgrade menu in the software, then you are able to upgrade your software with ease.

Notice during upgrade:

1. Make sure your laptop connect with Power adapter and the battery is charged over 80%

2. Please do not run any programmer during upgrading

3. Please do not connect piwis tester ii to laptop during upgrading

4. Once the upgrade finish, please restart the laptop without checking any software.

5. If upgrade failed, please do not worry, contact with our online customer service immediately.

So Good luck for everyone, if you still have any questions or comments, please leave your message in this post, i will reply you as soon as possible!


  • 0

The latest porsche piwis tester ii

Porsche piwis ii support multi-language powerful diagnostic and  offline programming, Porsche PIWIS Tester 2 automotive diagnostic system has newly upgraded to V15.100.

You can get all infos about piwis ii on Autonumen.com

V15.100 Porsche PIWIS 2 new feature: Piwis 2 tester Software DVD V15.100 can work with 2015 new cars Porsche Macan and add porsche wiring diagram as well as service plan

Software version: V15.100

PIWIS software compatible hardware:
Porsche Diagnostic Scanner, Allscanner VCX Porsche PIWIS TesterⅡ, VXDiag diagnostic tool for Porsche and Landrover

Operating system: Windows XP ONLY

How to update Porsche PIWIS Tester to V15.100?

1) Download update software DVD: Free download V15.100 Porsche PIWIS Tester 2 http://cnc.qclt.com/porsche/piwis2-update-DVD/v15.100/ NOTE: The download link only fits for laptop with boot password Porsche-*****.

2) Select “Tools-DVD Update” and the software will be installed automatically

.
3) Click Yes to confirm install DVD released installation notice. 4) Click OK to accept setup notice.

5) Reboot system after complete installa

6) Open the software after computer reboot. Check the PIWIS V15.100 software information.


  • 0

How to using Piwis Tester II code Porsche rear end electronics

V18.100 Piwis Tester II Diagnostic Tool For Porsche With CF30 Laptop High Quality

Top 7 Reasons to Get Porsche Piwis Tester II
1. Software Version: V18.100 (Return back the hdd for update,or can update directly, update cost is different according to the QC number,if the last three numbers of your QC mark is 137,hdd cost is70USD,if the last three numbers of your QC mark is 098, hdd cost is 176USD, contact customer sevice for more details )
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (Need to return hard disk to us for upgrade, or you can just buy from us another hdd with newest software) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But need to pay for the authorization of them.
7. Support Key Programming function, cost 220USD per time (you need consult our customer sevice first with the type and year of your car)

Notice:
1. Please do not take out the hard disk from CF-30 laptop and install on other laptops, it may cause data lose and hard to recovery.
2. Piwis Tester II works with Porsche cars year after 2005
3. when you connect with device,you will get an indication “Found New Hardware Wizard”,make sure you click “next” to continue installing the driver, ortherwise the piwis 2 cannot be recognized by computer
piwis 2 Found New Hardware Wizard

30% Discount Products Piwis Tester II for Porsche Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with car year after 2005 and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.