How to use JLR DOIP VCI SDD Pathfinder for Land Rover 2017 Par emilyzhang dans Accueil le 29 Avril 201

  • 0

How to use JLR DOIP VCI SDD Pathfinder for Land Rover 2017 Par emilyzhang dans Accueil le 29 Avril 201

What for Land Rover the 2017 year?

JLR DoIP VCI (original or china clone) running Pathfinder or SDD software
It’s verified to read and clear codes of Range Rover L405 2007. Worked good!

What is JLR DOIP VCI:

This is a unit compatible with Pathfinder / JLR SDD software and all JLR vehicles with new vehicle architectures (from Range Rover/Range Rover Sports (L405/L494) Year 2017 onwards) or allow the enhanced diagnostics that Pathfinder will offer the retailer. In addition to the 2017 vehicle line application, the DoIP VCI will be capable of interfacing with the 2014-2016 Multi-CAN architecture vehicle lines on the Pathfinder diagnostic system. Pre-2014 and vehicles not detailed here will continue to use the current diagnostic system and VCIs.

How to use Pathfinder software to read/clear fault codes:
Vehicle: Land Rover Range Rover L405 2007

Procedure:
Run Pathfinder
Enter user name and password to log in

Warnings:

To use this maintenance tool, you should agree with items below:
– you’ve already read Garage Maintenance User Guide, the first section “Basic information”
– know how to use this tool to perform PDI, maintenance, diagnostics, etc.
– only used for Jaguar Land Rover vehicles
– finish junior training of JLR diagnostic tools
– obey laws & rules of vehicle health and security in your areas
– obey all policies & procedures of the dealer repairing

Search your vehicle via VIN
Auto scan
Automatic ignition switch not supported
Click on OK

Vehicle information:
Land Rover Range Rover L405 (DoIP)
VIN: XXXXXXXX
YEAR: 2007
MILEAGE: 5804km
ENGINE: 306DT – V6 3.0 DIESEL
TRANSMISSION: Automatic
DRIVER: LHD (left-hand driver)
TYPE: 5 DOOR STATION WAGON
ACCESSORY: STANDARD
Go to ECU Diagnostics
Reading fault codes
Read All DTCs
Go to clear all DTCs
Then refresh DTCs
Done!

JLR DOIP VCI Car List: (14-16MY)
XE (X760)
F-Pace (X761)
F-Type (X152)
XF (X260)
XJ (X351) – 16MY only
Evoque (L538)
Discovery Sport (L550)
Range Rover (L405)
Range Rover Sport (L494)

Disclaimer: All about JLR DOIP VCI and Pathfinder here is China clone version. But it can works as good as the original.


  • 0

JLR DoIP Pathfinder vs. JLR SDD software

Here, i’ll chip in words of “Goodbye JLR SDD and Hello Pathfinder”

What’s the difference between Pathfinder and SDD software?

1.The JLR Pathfinder software

(You must have a online account to work with it; Autonumen.com won’t offer it)

It is the only unit that will be compatible with the Pathfinder software and all JLR vehicles with the new vehicle architectures found in 2017 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2017 and newer vehicles, the JLR DoIP VCI will also be capable of interfacing with 2014 through 2016 Multi-CAN architecture vehicles (see application list below).

2.The SDD software

(If you want to do programming, you must have an online account)

All 2014-2017 with no DOIP and earlier (2006 to 2014) land rover and Jaguar will still use the JLR SDD software.

Why we use JLR Pathfinder instead of SDD?

The reason for SDD being retired and Pathfinder being introduced is more because of the contract with Ford expiring, as the SDD is based on the Ford IDS, so JLR has to pay Ford to keep using it.

The major change to the cars themselves is the infotainment system, the Next Generation Infotainment (NGI) is an ethernet-based system, vs the older MOST fibre-optic infotainment i.e. the IAM2.1

So yeah, you could not (easily or economically) retrofit the NGI system into an IAM2.1 car, for example. The components and network are totally different.

But… the NGI has been in some JLR vehicles since 2016, and is supported by SDD. There will be a cutoff where new models are no longer supported by SDD and only by Pathfinder. But Pathfinder also works on older vehicles too, back to 2014MY (approximately).

What tool can be used with Pathfinder software?

The  JLR DoIP VCI interface! Both original and clone are okay.

It is the only unit that will be compatible with the Pathfinder Software and all JLR vehicles with the new vehicle architectures found in 2017 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2017 and newer vehicles.

the DoIP VCI will also be capable of interfacing with 2014 through 2016 Multi-CAN architecture vehicles (see application list below). Vehicles 2014 and older vehicles not detailed here will continue to use the current diagnostic system and VCIs.

It’s tested by professionals.

Look here: Pathfinder is being tested with JLR DoIP VCI diagnostic and programming tool

Service function

Add or remove tow bar

Customer personalsation features

Deployable sidestep

OBDII readiness tests

Pre-delivery inspection

Select CCF

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com