WIFI Caterpillar ET3 Adapter III 317-7485 to replace bluetooth CAT ET Adatper III

  • 0

WIFI Caterpillar ET3 Adapter III 317-7485 to replace bluetooth CAT ET Adatper III

WIFI CAT ET III diagnostic interface has been released, this new wireless cat et adapter iii can be used to replace the old bluetooth cat et adapter iii, as bluetooth cat et apdater iii has stopped prodution and not available in the market any more.

CAT Communications Adapter III 317-7485 is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.
s
Real 2015A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks.

Software version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program allows adapter firmware upgrades as additional features become available;
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

If you are interested in this new WIFI CAT ET III diagnostic interface, please visit Autonumen.com or contact us, then we will be happy to give you the best offer and service.


  • 0

2018A Version CAT Caterpillar ET Diagnostic Adapter III

We will install the software before ship, so you can get it work directly after you receive it.
2018A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2018A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2018.

Cat et Caterpillar Electronic Technician Software 2018A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2018A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)
Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.
2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.

Package 1 :

1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)

Package 2:
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck,optional)


  • 0

Thy way to get CAT Caterpillar ET 2014A License Key

Caterpillar Diagnostic Tool is Caterpillar Vehicle interaction Adapter, Caterpillar vans Diagnostic instrument. Caterpillar et software program 2014B is out there to multi-languge. Caterpillar et help support specialists to reprogram ECMs, reconfigure handle process parameters.

Thy solution to get CAT Caterpillar ET 2014A License Important at [url=file:///C:/Documents%20and%20Settings/Administrator/%E6%A1%8C%E9%9D%A2/autonumen%208-2-2/www.autonumen.com]autonumen[/url]

step1: caterpillar open electronic technician

phase 2: caterpillar digital technican asks for license

action three:caterpillar et 2014a asks for licensing

step four:copy license code

stage 5: open cat ET essential 2014a

step 6: open et2k9c.kg

action 7: caterpillar ET 2014a paste license code

move eight: caterpillar et 2014a pick membership

step 9:caterpillar et2010a copy license vital

step ten: caterpillar ET 2014a duplicate license vital

phase 11: paste license crucial in th following box

action twelve: Click authorize

stage thirteen:caterpillar et 2014a copy license granted


  • 0

CAT Caterpillar ET is really a exceptional obd2 solution

As a excellent obd2 solutions,CAT Caterpillar ET Diagnostic Adapter features a potent function.it not just can Show “Logged Occasion Codes” to show engine more than speeds,Higher temperatures, fuel consumption but also can view ECM’s existing configuration and adjust user settings,perform diagnostic tests and calibrations, and calibrate.Electro-mechanical and electro-hydraulic elements .

Is the Cat Comm III compatable using the computer software CAT Caterpillar ET 2011B Is this an actual caterpillar portion or even a knock off? Thanks.Yes, this is really the genuine CAT adapter, It’s also the ONLY advisable adapter for CAT ET, but obviously other ones will perform. It will function fine for the version you may have, and 2011C is actually the newest version.

What exactly is the distinction between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit perform with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks. CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines – Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.

Does this operate with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.If those Professional Diagnostic Tools use CAT Electronic Technician (CAT ET) for the application, it’s going to perform. Can the cat communicate 3 also be used to read detroit and cummins engines if I have the correct software? Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.

More similar items can be found on www.autonumen.com and any problem please feel free contact us.


  • 0

CAT Caterpillar ET is really a exceptional obd2 solution

As a excellent obd2 solutions,CAT Caterpillar ET Diagnostic Adapter features a potent function.it not just can Show “Logged Occasion Codes” to show engine more than speeds,Higher temperatures, fuel consumption but also can view ECM’s existing configuration and adjust user settings,perform diagnostic tests and calibrations, and calibrate.Electro-mechanical and electro-hydraulic elements .

Is the Cat Comm III compatable using the computer software CAT Caterpillar ET 2011B Is this an actual caterpillar portion or even a knock off? Thanks.Yes, this is really the genuine CAT adapter, It’s also the ONLY advisable adapter for CAT ET, but obviously other ones will perform. It will function fine for the version you may have, and 2011C is actually the newest version.

What exactly is the distinction between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit perform with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks. CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines – Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.

Does this operate with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.If those Professional Diagnostic Tools use CAT Electronic Technician (CAT ET) for the application, it’s going to perform. Can the cat communicate 3 also be used to read detroit and cummins engines if I have the correct software? Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.

More similar items can be found on www.autonumen.com and any problem please feel free contact us.


  • 0

CAT Caterpillar ET Adapter III is the latest generation of the Communication Adapter group

CAT Caterpillar ET Adapter III is the latest generation of the Communication Adapter group,and replaces the for CAT Comm Adapter II. This is the only recommended communication device for CAT,and the only datalink device that will allow you to properly communicate with a for CAT engine on dual datalinks. This function is needed for some ET (Electronic Technician) functions.

10.1

CAT Caterpillar ET Diagnostic Adapter III Compatible Vehicle: For Trucks, Excavators, Air Compressors, Ships, Drilling Rigs.

2018C Version CAT Caterpillar ET Diagnostic Adapter III software With ET Keygen was unlocked.

Here is the steps to teach you how to install and activation Cat ET SOFTWARE.

10.2

1. It is recommended to install the software on the WIN7 system. After installing the x86 or x64 installation files according to the system, run the cat 2018C software “ET 2018C v1.0” to select the language for installation.

2. Run 0-HWID to get the ID.

3. Run “1-Keygen-License-Maker”, fill in the ID to create the “keygen.key” file, and create a new folder in the root directory of the C drive: “FlexLM”, copy “keygen.key” into “FlexLM”.

4. Run “2-Keygen” and fill in the ID to create the “activation.key” file.

5. Drag the created “activation.key” file into “3-Key_Installer” and it will be installed.

6. my computer, right click on the properties – Advanced system settings – Advanced – Environment Variables – New variables under System Variables – new
Fill in:
Variable name: CALTMD_LICENSE_FILE
Variable value: C:\flexlm\license.dat

7. Run the installation license.

If you have problem to install CAT Caterpillar ET Diagnostic Adapter III software, You can watch check this link to watch the video. It will teach you how to install.


  • 0

CAT ET III WIFI Diagnostic Scanner Caterpillar ET3 Adapter III 317-7485

Heavy Duty Diagnostic CAT ET III WIFI Caterpillar ET3 Adapter III 317-7485 Diagnostic Scanner

CAT Communications Adapter III 317-7485 is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.

Real 2015A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks.

2015A Caterpillar ET3 Adapter III Communication:

1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program allows adapter firmware upgrades as additional features become available;
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).


  • 0

Best Quality CAT Caterpillar ET Diagnostic Adapter III

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop (Real Caterpillar ET3 Adapter III)

5.1

we will install the software before ship, so you can get it work directly after you receive it.
2017A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2017A Caterpillar Electronic Technician softwarer With Autel Tool CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.
Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)


  • 0

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

The old bluetooth cat et adatper iii has stopped production, and you may get the new WIFI CAT Caterpillar ET Diagnostic Interface adapter to replace it, autonumen.com has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.
4.1

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

Car Diagnostic Tools CAT Communications Adapter III 317-7485 is the most current generation on the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.

True 2015A Caterpillar ET3 Adapter III P/N 317-7485 Experienced Diagnostic Adapter for CAT from www.autonumen.com with WIFI

This can be the only encouraged communication device for Auto Repair Software CAT, and the only datalink device which will permit you to properly communicate having a CAT engine on dual datalinks.

Software version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Enables communication in between service tools and engine controls employing numerous data hyperlinks which include J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash plan permits adapter firmware upgrades as further features grow to be available;

3. Uses J1939/11, high-speed information link (a part of ADEM III controls), substantially lowering flash times;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to three minutes).

Should you be trying to find wireless diagnostic interface for cat engines, please you may pick this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter, and you will get 5% off discount should you order it now.


  • 0

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

The old bluetooth cat et adatper iii has stopped production, and you can get the new WIFI CAT Caterpillar ET Diagnostic Tool adapter to replace it, autonumen.com has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

CAT Communications Adapter III 317-7485 would be the newest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is required for some CAT ET (Electronic Technician) functions.

Real 2015A Auto Scanner Tools Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI

This can be the only recommended communication device for Auto Repair Computer software CAT, as well as the only datalink device that may enable you to properly communicate with a CAT engine on dual datalinks.

Application version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Permits communication amongst service tools and engine controls utilizing numerous data links just like J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash program allows adapter firmware upgrades as more functions develop into available;

3. Makes use of J1939/11, high-speed information link (a part of ADEM III controls), substantially minimizing flash times;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time around 80%, from 14 minutes to 3 minutes).

For anyone who is interested in wireless diagnostic interface for cat engines, please you may decide on this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter from www.autonumen.com , and also you will get 5% off discount in the event you order it now.