How to Restore 2018.12V BMW ICOM NEXT A+B+C New Generation OF BMW ICOM A2 A3?

  • 0

How to Restore 2018.12V BMW ICOM NEXT A+B+C New Generation OF BMW ICOM A2 A3?

This post will show an customer’s solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your problem, please check the following steps:

Note: DO NOT UNPLUG the BMW ICOM Next emulator from the OBD II jack after an update via ISTA, a web interface or an emergency software update.

The ICOM Next starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the ICOM Next reboots due to a firmware update.

If the ICOM Next {LED}s remain red for more than 10 minutes, or if the ICOM Next is unplugged directly after an update, please carry out the following procedure:

1.Please ensure that ALL of the following prerequisites are satisfied:

1.1. You require a USB 2.0 or USB 3.0 flash drive. USB 1.x flash drives are not supported.

1.2. The USB flash drive must be formatted with a FAT32 file system.

1.3. A minimum of 60 MByte free space is required on the USB flash drive.

2.Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.

ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:

– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)

– or enter the whole path into the Windows Explorer’s address bar and press enter.

3.Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the USB flash drive.

4.Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the USB flash drive.

5.Disconnect the ICOM Next from the power supply.

6.Plug the USB flash drive into the ICOM NEXT.

7.Press and hold the button pressed on the BWM ICOM Next and connect the ICOM NEXT to the OBD II jack of a vehicle.

8.Keep the button pressed. The ICOM NEXT starts with all LEDs glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.

9.Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.

10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.

11. Wait: This procedure may take several minutes. Do not disconnect the ICOM NEXT as long as any {LED} glows red.

12.After about 5 minutes the SYSTEM {LED} turns green again. The ICOM NEXT has been updated and is ready for use.

IMPORTANT: When the software update is complete, the ICOM NEXT needs to be connected to the dealer’s network in order to be reconfigured.

All previous settings are lost during the update. If there is a “user.settings” file on the USB flash drive, it will be applied after the firmware update.


  • 0

BMW ICOM NEXT A+B+C 2016 New Generation OF ICOM A2 with V2016.07 ICOM HDD Win7 System Installed on Dell D630 Laptop 4GB

14.1

BMW ICOM NEXT A Latest Generation Diagnostic Head For BMW, MINI, Rolls-Royce BMW-Model.
Can Replace BMW ICOM A2, including all function of ICOM A2.
We provide this package offer to install latest BMW ICOM HDD on the Dell D630 laptop for you ready to use

14.2

Improved Functionality and Performance:
1. Gbit workshop LAN, backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet supportthis and interface not
yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car
interface,will cause adaptation costs)
3. Faster start-up times and high throughput
4. Through high-performance,low-power ARM SoC
5. Improved handling
6. More flexible OBD cable
7. Lighted button for logs etc

ICOM NEXT A+B+C Diadnostic Head Overview?
Functionally compatible to ICOM A2
Mechanical design similar ICOM A2
Backwards compatible to car adapters (ICOM B, C) and motorcycle adapters (ICOM D, E)

ICOM NEXT ABC Specifications:
Zeroization of data on tamper detection
Secure supply chain assurance
Key storage using physically un-clonable function
CRI Pass-Through DPA Patent Portfolio
Advanced cryptographic Services

This is from Autonume.com, BMW ICOM NEXT A+B+C 2016 New Generation OF ICOM A2 with V2016.07 ICOM HDD Win7 System Installed on Dell D630 Laptop 4GB


  • 0

BMW ICOM Next vs BMW ICOM A2 ,which better ?

BMW ICOM Next A+B+C and ICOM A2 are two popular Diagnostic and Programming Tool for BMW,MINI,Rolls-Royce BMW-Models.Then Buy BMW ICOM Next or buy BMW ICOM A,which one better ? Today, BUYOBDII.com blog will share a comparison between BMW ICOM Next and BMW ICOM A2 +B+C to help customers better pick up right tools.

About BMW ICOM Next

2017 BMW ICOM Next is the latest generation diagnostic head for MW,MINI,Rolls-Royce BMW-Model,which also was the updated version of ICOM A2,inherited all features of BMW ICOM A2,but at the same time,also made some changes and added new features,see striking features below

1. Gbit workshop LAN,backwards compatible
2. Preparation for Gbit LAN on vehicle OBD(cars do not yet supportthis and interface not yet defined,ICOM Next hardware adaptation will be necessary for future Gbit car interface,will cause adaptation costs)
3. Faster start-up times and high throughput
4. Through high-performance,low-power ARM SoC
5. Improved handling
6. More flexible OBD cable
7. Lighted button for logs etc

About New BMW ICOM A2

BMW ICOM A2 Supports BMW and MINI vehicles from old to latest 2015 and currently,BMW ICOM A2 is the best BMW ICOM.
15.1
15.2

BMW ICOM Next vs BMW ICOM A2

The Same

1.For BMW Models.
2.Multi-Languages Supported.
3.work with same software ISTA-D ISTA-P for the same BMW Vehicles.
4.great performance and affordable price.

The Different

1. Different Outlook Design
15.3
As we have seen above, the ICOM Next with new look,it is with black and white color.

2.Hardware and function : These two BMW tools shared same software,yet,different firmware adaption. BMW ICOM Next A with better PCB board.

3.BMW ICOM NEXT A +B + C is the improved version of BMW ICOM A2,Functionally compatible to ICOM A2,but with more stable during programming and faster start-up times and high throughput.

4.Connection methods : BMW ICOM NEXT Diagnostic interface cant support wireless,it is only USB connection way,while the ICOM A2 supports wifi,the package contains a wifi adapter.

5. ICOM A2 With HDD,yet,the BMW ICOM Next didnt come with. So, for BMW ICOM Users,you need to install software separatly.

So,if you are looking for a BMW ICOM with WIFI connection and HDD with installed software,then buy BMW ICOM A2 will be your choice, it is the best ICOM with WIFI function. Otherwise,i will recommend you buy BMW ICOM Next, after all,it is the newest geneartion with all features of ICOM A2,yet,at the same time,it made some improvments and will give you a better experience and the price is cheap affordable too.

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com


  • 0

Do I need ICOM Next to flash BMW G30?

Purpose: Need to flash a BWM G series G30

Puzzle: Is the ICOM Next mandatory or is the up to date ICOM 1st generation ICOM from 2012 ok?
Can I flash NBT EVO with old ICOM?

Advice & Options:

1.ENET cable would probably be better for you.

2.I flashed NBT EVOs with old ICOM without problems.

3.Flashed all Cars with Icom Next and Online Aos with DHCP over Router. Since that i have Never any Problems with NBT or other. Flash E/F/G with this Setup.

Note that Online Aos is the online version of the BMW software for Diagnostic, Programming any many other things.

4.To answer your question
1st : you doesn’t need iCOM NEXT to flash the G series…but It actually Lot better & save up your times because iCOM NEXT has build in Gigabit connection.
2nd : old iCOM working find. It just take a lot longer.

5.Icom best any type , router I noticed w my setup I use desktop w 2 lan port and on a few f cars it actually faster then oem it programs up to 8 module same time w gigabit switch , and handle data lots faster than etnet cable and for certain modules the router is a must will crash hu high in kombi in a few others

6.Any icom will work , but to be safe with f,g,i series vehicles , use a dedicated router as kafas huh and a few other modules will crash if you do not use a router it handles the switches for Ethernet as those modules use more than 1 path way , in short it uses all 4 two pair wires and without router not good , this has worked for me for some time now good luck. note my router does not connect to wan

Conclusion:

BMW diagnostic tool ICOM Next is the best option for G series, working better and faster than old BMW ICOM cables. It handles multiprogramming and coding quite nicely. Gets the job done much faster if flashing the complete vehicle. Also, another benefit to Next will be compatibility for future cars.


  • 0

How to Restore BMW ICOM Next in 12 steps

How to Restore BMW ICOM Next? This post will show an obd2eshop customer’s solution to BMW ICOM Next restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident, please apply the following 12 steps:

Note: DO NOT UNPLUG the BMW diagnostic tool BMW ICOM Next emulator from the {OBD II} jack after an update via {ISTA}, a web interface or an emergency software update.

The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10 seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next} reboots due to a firmware update.

If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOM Next} is unplugged directly after an update, please carry out the following procedure:

1. Please ensure that ALL of the following prerequisites are satisfied:

1.1. You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drives are not supported).

1.2. The USB flash drive must be formatted with a FAT32 file system.

1.3. A minimum of 60 MByte free space is required on the USB flash drive.

2. Navigate to “C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-03-14-08”.

ProgramData folder is hidden by default. In that case, you have two options in order to access the file or the folder:

– change the settings directly in the Windows Explorer (“Tools => Folder Options => View => Show hidden files, folders or drives”)

– or enter the whole path into the Windows Explorer’s address bar and press enter.

3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory of the {USB} flash drive.

4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the {USB} flash drive.

5. Disconnect the {ICOM Next} from the power supply.

6. Plug the {USB} flash drive into the {ICOM NEXT}.

7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOM NEXT} to the {OBD II} jack of a vehicle.

8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red. The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.

9. Keep the button pressed. After about 4 seconds, all {LED}s turn orange/yellow. All {LED}s now glow in the same colour.

10. Release the button and then press it three times within five seconds. The {LED}s glow or flash red and orange/yellow again.

11. Wait: This procedure may take several minutes. Do not disconnect the {ICOM NEXT} as long as any {LED} glows red.

12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT} has been updated and is ready for use.

IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to be connected to the dealer’s network in order to be reconfigured.

All previous settings are lost during the update. If there is a “{user.settings}” file on the {USB} flash drive, it will be applied after the firmware update.

See more click:https://www.autonumen.com/