018.07 New BMW ICOM A3+B+C+D Plus EVG7 Controller Tablet PC with WIFI Function

  • 0

018.07 New BMW ICOM A3+B+C+D Plus EVG7 Controller Tablet PC with WIFI Function

2018.07 New BMW ICOM A3+B+C+D Plus EVG7  Controller Tablet PC with WIFI Function

Software Version : V2018.07

ISTA – D: V4.11.30,with SDP data V4.11.30
ISTA – P: 3.64.2 with Engineer Programming
can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2018.06

BMW ETK: 2018.06
BMW KSD: 2018.05  Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding

30% Discount Products BMW ICOM V2018.07 , With free Software:
1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30.1,data V64.2
2. get Chinese software DR.GINI B020
3. get count code navigation tool software FSC operator code
4. get one-clik hidden brush tool BMWAi V4.6
5. Add DIS Software for Old cars, DISV57 and DISV44,diagnostic and ecu programmer

System Requirements:

Dual-core processor, better above I3; over 4G of memory

Top 5 Reasons to Get BMW ICOM A2+B+C
1.BMW ICOM A2+B+C Hardware Version: V01.40.05
2.Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3.Support BMW All Series Diagnose and Programming
4.With Bonus Engineer Programming software


  • 0

How to solve the problem that BMW Icom A2 A3 host can’t be connected?

Aftre the BMW ICOM host is connected to the car via a 16PIN connector, and the other side is connected to the computer via a network cable. Your OBD2 Scanner BMW ICOM lan and system lights will light up. As follows:

But at this moment,the host can’t be found in the computer.As follows:

When meeting the problem,please update your 30% Discount Products BMW ICOM firmware as the following method:
1.Please connect BMW ICOM to the computer vith network cable and power on the BMW ICOM with a 12V power adapter.
2.Open the website address http://169.254.92.38:60080/by IE browser, username:root   password:NZY11502.
3.Click the “update firmware”,it will show ICOM firmware version information.
4.Choose the file ICOM-BootImage-01-11-01.bin,set image type to SYSTEM,click “Send the file”.
5.When shows “Write the image file to the flash?”,click “Yes”,then ICOM light turns red.
6.When shows “The SYSTEM IMAGE update was successfull”,click “Update Firmware”.
7.Choose the file ICOM-ApplicationImage-01-15-01.bin,set image type to APPLICATION.Click “Send the file”.It will takes a few minutes because of a little large file.
8.When shows “Write the image file to the flash?”,click “Yes”,then the ICOM light turns red for the second time.
9.It is all normal,click “reboot”.


  • 0

Top 5 Reasons to Get BMW ICOM A2 with Latest Software

Top 5 Reasons to Get BMW ICOM A2 with Latest Software

1.BMW ICOM A2 Hardware Version: V2018.03
2.Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
3.Support BMW All Series Diagnose and Programming
4.With Bonus Engineer Programming Software
5. NEW EVG7 DL46/HDD500GB/DDR4GB Diagnostic Controller Tablet PC Ready to Use

This is the package offer for 30% Discount Products BMW ICOM A2+B+C for with 2018.03V Software Plus EVG7 Diagnostic Controller Tablet PC, buy them together, save you a lot.Our engineer can install and test ok for you to use.

Compatible with BMW ICOM, ICOM A2, ICOM Next and ICOM PRO+A3

Software Version : V2018.03

ISTA – D: V4.09.13,with SDP data V4.09.13
ISTA – P: V3.63.02.001 can program F/G/I/K chassis for car (through the ICOM, not other cable )
Vin: V2017.12.01

Not connected 9000 days remaining

BMW ETK: 2018.03
BMW KSD: 03.2018   Multilanguage
BMW FSC Navigation Code Generator
BMWAiCoder for BMW Coding
With free BMW Engineer Software (INPA5.00, NCS3.5.1, WinKFP5.2.3, E-Sys 3.27.1, Psdzdata 63.2), BMW FSC code generator and BMW AiCoder

1. Support Multi-language: American English, British English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Japanese, Korean, Thai, Simplified Chinese and Traditional Chinese
2. Software Version: Newest V2018.03
3. Support Vehicles: For BMW Cars,  For  BMW Motorcycle,  For  Rolls-Royce, For  Mini Cooper
4. Support for BMW All Series Diagnose and Programming

Support Model:
It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

EVG7 DL46 Specification:

Mark : EVG7

Model : DL46

Processor : Intel Celeron 1037(Dual – 1.8Ghz/L3 2M)

DDR : The biggest support memory : 4GB

HDD : 500 GB SATA HDD.
LCD : 10.4 Inch The resolution of the 1024×768

Graphics : touchscreen widescreen LED backlight, the core graphics Intel HD Graphics

Speakers : Built-in Speakers

Wireless : 802.11b/g/n

LAN : The built-in 10-100M card

Bluetooth : BT2.0 , 4.0

USB : USB3.0 / Mini USB / 2 x USB2.0

Card Reader : TF Card Reader

Other Interface : VGA Voice Input / The Sound Output / DC Power Jack / Parallel LPT Port I/O VGA Output

Battery Type : 9 The core of lithium batteries 10.08V 6600 mAh

Power Adapter : 110V-240V The adaptive communication power supply

Battery Life : The specific time depending on the use environment

Specifications : 270x180x60 mm

weight : 1911g (with battery)

Certificates : CE / FCC /  RoH


  • 0

2013 New available ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C

AUTONUMEN.COM offer best price New ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C.

bmw icom A2 is the new update version of old version BMW ICOM. ICOM A2+B+C is second generation diagnostic interface for BMW ISTA system. BMW ICOM A2+B+C support BMW cars till 2013 year. Support BMW & MINI full system diagnose and offline programming.

What is BMW ICOM A2 ?
The modified BMW ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments.

What is BMW ICOM B ?
To protect the MOST connector, the BMW ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.

What is BMW ICOM C ?
The BMW ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the BMW ICOM A2 and makes storage in the engine compartment easier.

AUTONUMEN provide both hardware and software for BMW ICOM A2+B+C .If you are looking for BMW professional diagnostic tools,please no hesitate to contact our sales.


  • 0

BMW ICOM A2 Wifi with Dell E6420 V2014.09

BMW ICOM A2 with Dell E6420 Wifi Wireless

BMW ICOM A2 Wifi solution comes with Dell E6420 laptop, software preinstalled ready to work, software version will be 09/2014. ISTA/P Expert mode for single module programming is added in this order for Free.

Product Details:

1. Brand: BMW ICOM
2. Newest Version: V2014.09
3. Support Multi-Languages: English, Chinese, Dutch (Nederlands), English GB, English US, French (Français), German (Deutsch), Russian (Русский язык), Greek (Ελληνικά), Italian (Italiano), Japanese (日本語), Korean (한국의), Portugese (Português), Spanish (Español), Swedish (Svenska), Thai
4. Support update: again buy software for update
5. Support vehicles: BMW
6. weight: 6.5Kg
7. Package:
34cm*29cm*18cm ( Inch:13.35*11.39*7.07 )

Get BMW ICOM A2 Wifi with Dell E6420 for following reasons:

1. Software Version: 2014.9
2. Equipped with WIFI and a router, now you can use wireless function.
3. Supports for a new Intel adapter function

Notice:

1. Dell E6420 Laptop is Second hand, not brand new
2. This Order comes with BMW ICOM mux, cables, Laptops with software installed, can use Wireless for diagnostic, CAN NOT use Wireless for programming, it is not stable, need to use cables for programming.


  • 0

Bmw Icom A2 interface

Topic:
I have recently bought the new BMW Diagnostic Tool Icom A2 interface with Isid 3.1, Ista/d 2.36 and Ista/p 2.49.2 software and i would like to ask if anyone knows if it’s possible to connect wireless to the car’s obd without the LAN cable since it support’s WLAN option or what else needed to make it possible? The Icom A2 interface is a clone.
Replied by shawnsheridan
I don’t think any of the A1 ICOM Clones had WLAN card inside, and I would be surprised if A2 ICOM Clone did. If it does, I am pretty sure you need a special Access Point connected to ISIS Server to use WLAN mode.
Replied by TroyE60
Thanks mate for your answer. Actually the ICOM A2 supports Wireless lan. As you can see from the below pic which I have already uploaded (Icom A2 connected in my car’s obd slot) with the system light green (turn on – operational) it has 4 lights. One for communication, one for wireless lan, on for LAN (RJ 45) and one for the operation named system. I was wondering if there is some kind of emulator or something to “trick” the interface so it thinks it is connected on an ISIS server even running from VMware.

How to do BMW coding with ISTA on MacBook Pro
Here are the details of my setup of MacBook Pro with VW Fusion – Windows 10 or Bootcamp, both working for BMW coding with ICOM software.
Hardware: 2015 Retina Macbook Pro 16GB RAM, 512GB SSD
Software: VMWare Fusion 10
VM Specs:
Windows 10 64Bit
4GB RAM
Thinly provisioned 200GB VM. (Thin means it only takes the space it is using but Windows thinks it is 200GB total.)
Software working on VM:
BMW Standard Tools 2.12 (NCSexpert, WinFKP, INPA, etc)
ISTA-D (Dealership Diagnostic Software, I did not install ISTA-P due to space concerns)
E-Sys (For newer Fxx/Gxx/Ix cars)
I back up my VM on an external hard drive and I take snap shots of the VM in case upgrades to the software fails and breaks.
I am very happy with this setup.
Another option instead of VM fusion is to bootcamp the mac. That’s what I’ve done also. It partitions the hard drive into separate drives, allowing you to boot the Mac up into windows natively. Then used bimmergeeks.com software packages. It’s very clear and easy to understand. It’s also been condensed some and has the most recent updates in place….
BootCamp
Pros:
Free + windows 10 license
All system resources are utilized by Windows only.
Acts like a windows machine
Cons:
Requires permanent space allocated to BootCamp
Requires rebooting if you ever want to go back to Mac
Unable to write into MacOS side of things without 3rd party drivers
VM
Pros:
Snapshots
Space allocated is only like a file, so free space is still utilized by Mac
No need to restart to get into Windows for something.
Cons:
Not free, and annual upgrades start to cost a lot
Shares resources with MacOS which can be limited if the Mac doesn’t have enough RAM, CPUs etc.
A little more complicated in initial setup sometimes.
Both have its merits and I ultimately like BMW ICOM A2 when the mac has enough resources to run it.


  • 0

The Super BMW ICOM A2 Replace BMW GT1 and OPS Tool

Just for me , the super ICOM A2 tool has advanced configuration and high performance applications so that many people like it . There are some reason is listed why I like it .

On the one hand , the Super BMW ICOM support update online and software . Super BMW ICOM software is fully functions as the dealer workshop use, including BMW Group ISTA , BMW Group ISTA-P , BMW Group ISPI Local path, Super BMW ICOM updater v1.0 , Super BMW ICOM SN Reader and so on . And the Super BMW ICOM software platform use ISPI NEXT which is the latest platform developed by BMW AG . The Super BMW ICOM is one of the best after-market software for BMW diagnostic , coding, programming in the world, it is also an up-to-date software for online upgrade directly , software installed based on Windows 8.1 and fit for most of the laptops PC in the market with SATA port .

On the other hand , the Super Car Diagnostic Scanners Tools BMW ICOM A2 has much more functions and features . This tool support all kind of language , just like English , Japanese , Chinese , Italian , Spanish , Russian and so on . And the Super BMW ICOM can upgrade the ISA-D software till the latest version and add fix the bug of full screen when using ISTA-P and ISPA-D . This tool also can add full language selection options internal ISTA-P and optimize the windows 8.1 first time start configuration .

To sum up , the super ICOM A2 tool is a useful tool that can help you deal with many problems . It’s worth to buy it .


  • 0

2013 New ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C For Sale

New BMW ICOM A2 Diagnostic & Programming is the professional diagnostic tools for BMW .Cover Coding and programming on with software ISTA/D and ISTA/P, Full COMPREHENSIVE PROFESSIONAL DEALER SYSTEM FOR ALL BMW (BMW, Mini, Rolls Royce, BMW Motocycle) UP TO 2013.The full system replace DIS GT1/SSS/OPS and OPPS.

BMW ICOM now is the latest dedicated car diagnostic tool for the BMW vehicles, and the BMW ICOM A+B+C is essential diagnostic interface for this tool. And now, the BMW ICOM A2+B+C as a second generation of the diagnostic interface is also available in the industry.

As an external MOST interface for the ICOM A and ICOM A2, ICOM B connects with the ICOM A through a USB auto diagnostic line. However, the electronic operation of ICOM B can only work if the minimum supply voltage of the ICOM A is 8V.

Compared to the BMW ICOM A, the BMW ICOM A2+B+C is equipped with a stronger processor and has a more storage capacity.

We are the professional auto diagnostic tools supplier in China.Our website is www obd2tool com .Our company offer factory price for both Auto Scan Tool BMW ICOM and BMW ICOM A2+B+C .If you are looking for auto diagnostic tools,please contact us.


  • 0

How to use 2017.07 version BMW ICOM A2 ISTA for diagnostic car ?

BMW ICOM A2+B+C latest software version is 2017.07.   ISTA-D 4.05.32  ISTA-P 3.61.5    VIN: 2017.05   Now we show you how to use BMW icom A2 and ISTA D software ,check  all car module status and delete fault code history.  the operation steps is easy.

steps 1:  connect your ICOM A2 main unit with your car, then open ISTA-D  4.05.32

You need to do  a vehicle test firstly.

go to ” vehicle information ” -” control unit free”-“start vehicle test”

10.1

click” yes” , then start vehicle test

10.2

steps 2: when finish vehicle test.  the faulty module will be display in yellow or red.  yellow means there is a error memory,  red means no response.

if you see there are all is green,   it means not problems at all.

press the “display fault memory ” button to check the error code.
10.3

steps 3:   click” vehicle management”-“troubleshooting” – ” fault memory”

you can see the error description with error code.   double click every item, you can see detail description of phenomenon.

10.4

just click” delete fault memory” to clear the faulty memory

10.5

10.6

10.7

BMW ICOM software support Multi-language available in diagnosing, programming and TIS diagram circuit: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.
10.8
Posted by Ivy

Posted in Auto Scanner Tools

Tagged with BMW diagnostic tool, BMW ICOM, BMW ICOM A2, BMW ICOM software


  • 0

BMW ICOM ISIS ISID Fault code 5/7 error solution

Following text provides the BMW ICOM A+B+C ISIS ISID software expired error notification and solution.

NOTE:

Integrated Service Information Server (ISIS) two servers (one backup) + ISTA

Integrated Service Information Display (ISID) portable tablet device

Problem:

When install BMW ICOM A+B+C ISIS ISID diagnostic software HDD on VMware, the system displays an error message BMW ICOM software expired notification.

“An error has occurred. The application is closing

Fault code: 5/7

Fault text:

The requested brand is not available”

Error screenshots were taken below:

21.1

21.2

21.3

Possible solution:

1) Check the date on the virtual machine

Run BMW ICOM software, if it shows the notification as the pictures, that’s mean software is expired, please restart your computer , press “delete” to enter the BIOS system, change the system time same as software time.

21.4

2) If the first solution does not work, please try the second way.

Restore a snapshot of VMware. Re-install the VMware system.

Re-extract the files on BMW ICOM ISTA-D ISTA-P software to computer