How to update Benz MB SD Connect C4 firmware to 2.30

  • 0

How to update Benz MB SD Connect C4 firmware to 2.30

If the Mercedes Benz MB SD Connect C4 diagnostic system reports “DCDI-eErrorCode=204 (204)” error, the possible reason is that the SD Connect Star diagnosis firmware program was deleted so that the Star multiplexer WIFI and configuration are failed. The only solution is to update and flash the firmware.  Error screenshots taken below:
25.1
25.2
25.3
Follow the instruction here to updare the MB SD Connect C4 multiplexer firmware:

Update Star diagnosis Connect main unit firmware to 2.30 version:
25.4

1) Prepare 6 AA5 batteries, follow the pdf document “How to install MB SD C4 rechargeable battery” to installed battery
https://www.autonumen.com/category-163-b0-MB+Star+Compact+C4.html

NOTE: Must use the new battery and make sure battery is fully charged, otherwise may fail to update the firmware. Connect the Star diagnostic Connect multiplexer with computer via LAN cable and connect it with vehicle using OBD main cable. If SD C4 cannot connect to vehicle, feed it with OBD 12V power supply. If SD Connect is not connected with vehicle or fed with OBD 12V power supply, the SD Connect will report 622 firmware update fail error.

2)      Open 2012.09 DAS software, browse to C:/program files/SDconnect Toolkit, to check if the three files are included in the folder: Update-automatic, Update-manual, Update-Special, shown as picture below:
25.5

If the file names are incorrect, rename the file.

3) Reboot the computer

4)  Start updating firmware. Follow the instruction on “2 Update SDconnect”

https://mega.co.nz/#!PpMnSARa!BCD8S0Dv-9GWYR3OnzQp_TTZZG7zmtE1yBmxmVxsHxI


  • 0

DIY Coding Mercedes Benz with MB SD Connect C4

Autonumen.com provides several Mercedes Benz coding instructions with MB SD Connect C4 diagnostic tool.

Equipment:
Mercedes Benz MB SD Connect C4 Star Diagnostic System (SDS) Developer Mode
Dell D630 laptop

1) How to add rear airbags to the AB control module

After well install and activate SD Connect C4 software, run a self test.
Connect MB SD Connect C4 to vehicle via OBD socket
Run MB SD C4 DAS software
Select Control Units
Select Body
Select Airbag (AB)
Select Development Data
Select Control Module Adaptations
Select Variant Coding
Select Fahrzeugausstatung Kodieren
(the last menu entry can be slightly different in various module variants)
Select the drop-down list in the field Airbag Hinten Rechts and Airbag Hinten Links
Set the value to Yes
Back up to the main Airbag menu, reset the fault codes, cycle ignition, reset fault codes again and cycle the ignition for 2nd time.

2) How to update the speed limited in a gasoline (ME-series controller) engine control unit

Select Control units
Select Drive module
Select ME-SFI 28
Select Development Data
Select Control Unit Adaptations
Select Explizite Kodierung

3) How to add fog lamps to function as a cornering aid
Select Control units
Select Body
Select Driver Side SAM
Select Development Data
Select Control Unit Adaptations
Select Variant Coding
Select Abbiegelicht set to ON (“ja”).
Select Passenger SAM (if present, for example in 211/219 model series) and similarly perform the same coding operation in the second SAM unit.


  • 0

MB Star C3 vs MB Star C4

New Mercedes Benz Star C3 is a professional diagnostic tool specially for mercedes benz cars. Mercedes Benz Star C3 can do benz trucks and new types of mercedes cars.Super quality,Big aluminum box for package, easy to take at hand.XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to October of 2006, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

MB STAR C3 VS MB STAR C4:
12.1

12.2

MB SD Connect Compact 4 supports reading & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. MB SD Connect Compact 4 supports wireless diagnose, support K-line,CAN BUS and UDS protocol, fit all computers,with multi-language.

Many people on the internet all said the MB Star C3, C4 software is the same, C4 whit SD CONNECT also with this software, and for the hardware, C3,C4 is same function in diagnosing.For mercedes Benz, C3 and C4 also can do work, in my opnion, C4 work with all the benz and more than C3, but C3 can do benz truck very well, this is advantage for c3.C4 is much stronger in anti-interrupting ability, when C4 tests cars, it’s hard to influence by the environmenr outside, such as magnetic field,noise. C4 is much smaller in the appearance than C3.Benz compact 4 SD-Connect is a latest Benz wireless multiplexer. It will connect to the PC by wireless connection.The biggest difference, i think, is connection wiring mode, C3 need 232 port, but C4 can be used with network port, even wireless.Also, the price C3 and C4 is very different, now C3 is the half price fo C4 as far as I know. could you some guys add more infos? i want to know more, thanks.

https://www.autonumen.com/


  • 0

Easy methods to select MB Star, Extremely MB Star, MB SD C4, Mercedes BENZ C5 SD

MB Star, Extremely MB SD Connect C4, MB SD C4, Mercedes BENZ C5 SD are usually analysis tools to get benz, and autonumen.com have several different benz diagnostic tools,how to choose from them?
you. HDD Practice Hints:
13.1
you. Work with outside HDD, you should ensure you in close proximity a person’s anti-virus program as soon as going your program, in any other case program will be broken couple of. If you are using inside HDD similar to DELL D630 HDD, you should do not install new softare upon our own hard disk, furthermore you should do not adjust our own program, should program happen to be broken.
a few. In the event you build your password to get our own program, you should don’t forget your password. couple of. Star analysis tools assist encoding operate, include online& real world encoding, what you need to be charged focus?
you. To get online encoding operate, 2014. 12 and more sophisticated program could assist. To get old edition, can not assist.
couple of. Whenever purchaser needs to open up your real world operate, program edition in advance of 2014. 07 can not assist.
a few. Benz star c3, c4, plenty of motor vehicle styles would possibly not assist online encoding. Far better to decide on mb sd c4 having most recent 2015. 07 program.
a few. MB Star, Extremely MB Star, MB SD C4, Mercedes BENZ C5 SD Hook up Comparing:
Object NO. SP45-C SP45-F SP117 SP06 SP100-B SP100-D SP45-B SP243
Object Name MB Star C3 MB Star C3
having 7 cables Best MB Star C3 MB Star C4 MB SD C4 MB SD C4 Super MB STAR C3 Second Hands MB SD C5
Original NO NO NO NO NO NO HDD is definitely original Original
Most recent Version 2015. 05 2015. 05 2015. 07 2015. 05 2015. 07 2015. 07 2015. 05
Update By HDD By HDD By HDD By HDD By HDD By HDD Update Online
12 months to get free Support Redesign
Tough Disk External HDD,
Dell D630 HDD External HDD,
Dell D630 HDD External HDD,
Dell D630 HDD External HDD,
Dell D630 HDD External HDD,
Dell D630 HDD External HDD,
Dell D630 HDD External HDD,
T30 HDD,
Dell D630 HDD SSD HDD
Assist
Vehicles 12V automobiles only cars, trucks cars, trucks cars, trucks cars, trucks cars, trucks cars, trucks cars, vans
Connection Cable Connection Cable Connection Cable Connection Cable Connection Lan Wire and
Cellular Connection Lan Wire and
Cellular Connection Cable Connection Cable Link
Cellular Link
Protocols K-line and
COULD Bus K-line and
COULD Bus K-line and
COULD Bus K-line and
COULD Bus k-line, COULD Bus,
UDS k-line, COULD Bus,
UDS K-line and
COULD Bus Support BENZ most recent process
Assist Most recent Crossbreed W222.


  • 0

High Quality Full Chip MB Star C4 SD Connect

Car Diagnostic Tools MB Star SD Connect C4 Function:

1. 2000~up to now Car, Truck, Sprint, Smart;

2. All electric system Diagnostic;

3. Reading out and erasing trouble code; reading the real-time data of sensor and actuator; testing the components of cars; coding and programming.

4. Support WIFI (Need to Set Different IP Address)

5.Software Support Multi-language:

English, Chinese,Czech, Danish, German, Greek, Spainsh, Finnish, French, Hungarian, Italian, Japanese, Korean, Dutch, Polish, Portuguese, Romanian, Russian, Serbo, Slovak, Slovenian, Swedish, Turkish

6. New Star Diagnosis C4 not only supports K-line diagnose, CAN BUS,but also UDS diagnose protocol. Because old MB Star C4 main board do not have UDS chip, the old one can not support it;

7. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;

8. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products

14.1

14.2

Software List:

1) DAS: the automatically Diagnosis Assistance System

2) X-T: New software released to diagnosis new cars.

3) WIS.net: Workshop Information System

4) EPC.net: Electronic Parts Catalog

5) ST Finder: Part location finder

6) STARUTILITIES : the movement management system and self-test

7) SD Media : Video and PDF lessons

8) PL 71: Price List to find out how much price by input the parts number

9) Smart TAN Code: Opened special function in DAS program with Smart cars 450/451/452/454

10) DTS Monaco 8: (install it via teamviewer after getting parcel, please contact seller)

11)  Disassembly system: Video lessons to teach you how to remove each

12) part from cars with details order steps.C4

13)Vediamo: V5.01.00

Newest version v2018.12 added more special function

14.3
14.4

MB STAR Scanner MB Star SD C4 Laptop:

Work with Super Strong Military TOUGHBOOK CF-19, WORK fast &stable no error!

CF-19– a Super Military Toughbook,

Waterproof,

Dustproof,

Drop Resistance,

180° Rotatable Touchscreen

Why choose our CF19 Laptop:

Super Military Toughbook! Second hand But in Very good condition, we test every cf19 laptop before shipping, quality warranty!!!

High configuration:

Screen Size: 10.1 inch

Memory (RAM): 4GB ( while others offer only 2G, To work with C4 system,4G is much more fast and stable)

Processor Type: Intel Core 2 Dual

CPU: update to i5 cpu ( while other offer —  L7500 the lowest configutation)
14.5


  • 0

Which mb sdconnect c4 worth the money?

MB SD connect C4 with laptop v2018.5 Version avaiable now ,It is ready to work after you get it ,worth to buy.

Star diagnosis SD C4 can used by wire connection or lan cable,everything set well before send it out .full chip .detail info.

1.Support Wireless

2.Software Version:2018.05

3. Hardware Verison:  OS:2.3   CSD:2.11

4.Serial number:100925
5. Supported Multi-Language: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/ Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese

6. Support Offline and Online Programming.

as we know ,it support wifi work,how to set it in WIFI condition ?

somebody do not know , but we know ,so we recommend buy with laptop together ,

so can use it directly when you get it .it’s worth to buy and save more time .Best feedback from here .

For further info.please use our online service www.autonumen.com or skype if you have .

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com


  • 0

MB SD Connect Compact C4 software fail to test

When the car starts and all cables are connected well, the software driver is installed, but it fails to test, the first thing to do is self-test, self-test can help make sure whether the hardware is working or not. Take my own story for example, several days, when I start DAS, it says it is developer version, but the software is developer version under some menus. I am NOT connected to the internet when diagnosing a car, only the SD-Box is connected to the notebook via WLAN. Is it or is it not a developer version?
Then I need to firstly well set the MB SD C4, then go to self-test C4, finally find out where is the problem according to the self-test results. I would like to share the steps on self-test.
Step 1: click “STAR UTILITIES”.

Step 2: Click “Self Diagnosis” and then click “CAESAR Self Diagnosis”.

Step 3: under SDconnect Toolkit, the toolkit is being initialized, several seconds later, the self-test has started, I find the signal light is receiving sign, and SDconnect name displays Part D and the Power supply display “Vehicle”, the process display the procedure.

Step 4: after the self-test is finished, again click “CAESAR Self Diagnosis” to open the self-test report. Take the following report for example, the following reports shows MB Star Diagnostic Tools MB SD C4 has no problem.
Device: Part D
Toolkit-Resultcode:1
SDconnect Toolkit – device diagnostic – Part D
===========================================
CAESAR STOS+Rev: 2.12 from Jun 16 2005
generated protocol file from 12.12.2010 04:01
SystemCheck :
Check serial ………..0 OK
CAESAR  HW Detection :
D2Access… 0 OK
D2DownLoad …0 OK

CAESAR Part D2 detected on COM2 WITH baudrate: 19200
CAESAR version check:
D2CheckSNVER…0 OK
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial number 029866


  • 0

Difference between MB Star C3 and MB Star C4

Many times ago, i saw a blog about MB sd connect C4 for benz, the author said he like this tool very much, and make a comparison with mb star c3 for a result that MB Star C4 is much better than c3, I was not too much attention to it. However, a month ago, i also saw a thread on an auto fourm about obd2 tools, the generl mean about the thread is Mb Star C3 is better C4. i think it’s a question, so i want to serach some infos on the internet.

I serach “what’s the difference between MB Star C3 and MB Star C4″ with google, and get some answer. Here i made a discription about C3 C4 and with a share.

Many people on the internet all said the MB Star C3, C4 software is the same, C4 whit SD CONNECT also with this software, and for the hardware, C3,C4 is same function in diagnosing.

For mercedes Benz, C3 and C4 also can do work, in my opnion, MB Star C4 work with all the benz and more than C3, but C3 can do benz truck very well, this is advantage for c3.
C4 is much stronger in anti-interrupting ability, when C4 tests cars, it’s hard to influence by the environmenr outside, such as magnetic field,noise. Mercedes Star Diagnostic C4 is much smaller in the appearance than C3.

Benz compact 4 SD-Connect is a latest Benz wireless multiplexer. It will connect to the PC by wireless connection.
The biggest difference, i think, is connection wiring mode, C3 need 232 port, but C4 can be used with network port, even wireless.

Also, the price C3 and C4 is very different, now C3 from autonumen.com is the half price fo C4 as far as I know. could you some guys add more infos? i want to know more, thanks.


  • 0

How to update Benz MB SD Connect C4 firmware to 2.30

If the Mercedes Benz MB SD Connect C4 diagnostic system reports “DCDI-eErrorCode=204 (204)” error, the possible reason is that the SD Connect Star diagnosis firmware program was deleted so that the Star multiplexer WIFI and configuration are failed. The only solution is to update and flash the firmware.  Error screenshots taken below:

Follow the instruction here to updare the MB SD Connect C4 multiplexer firmware:

Update Star diagnosis Connect main unit firmware to 2.30 version:

1) Prepare 6 AA5 batteries, follow the pdf document “How to install MB SD C4 rechargeable battery” to installed battery

http://www.eobdtool.co.uk/upload/service/instruction-how-install-mb-sd-c4-rechargeable-battery.pdf

NOTE: Must use the new battery and make sure battery is fully charged, otherwise may fail to update the firmware. Connect the Star diagnostic Connect multiplexer with computer via LAN cable and connect it with vehicle using OBD main cable. If SD C4 cannot connect to vehicle, feed it with OBD 12V power supply. If SD Connect is not connected with vehicle or fed with OBD 12V power supply, the SD Connect will report 622 firmware update fail error.

2)      Open 2012.09 DAS software, browse to C:/program files/SDconnect Toolkit, to check if the three files are included in the folder: Update-automatic, Update-manual, Update-Special, shown as picture below:

If the file names are incorrect, rename the file.

3) Reboot the computer

3)  Start updating firmware. Follow the instruction on “2 Update SDconnect”

https://mega.co.nz/#!PpMnSARa!BCD8S0Dv-9GWYR3OnzQp_TTZZG7zmtE1yBmxmVxsHxI

This is from autonumen.com website technical support: How to update Benz MB SD Connect C4 firmware to 2.30
loading..


  • 0

MB SD Connect Compact C4 C5 DELL D630 Software HDD Support WIN7 System

Latest V2018.12 MB SD Connect Compact C4 C5 Dell D630 Software HDD come with Xentry, DAS, WIS and EPC system, ect. MB SD C4 software provide full system diagnosis for Mercedes Benz Car, Bus, Truck, Sprint, Smart till now. It can work with both MB SD Compact 4 and MB SD Compact 5 diagnostic tool

From Autonumen.com MB SD C4 Software HDD highlights:
1. Software languages: English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish, Swedish & Turkish, Chinese

2. Latest Version: Support Mercedes Benz cars and trucks till year 2017

3. WINDOWS system available: WINDOWS 7

4. Dell D630 format hdd can be work on Dell D630/Lenovo T410/Panasonic CF19,CF52/EVG7 Laptop

5. This software can work on both MB SD Connect 4 and MB SD Connect 5 on our website

Please Note:
1. WIN7/WIN 10 does not support HHT-WIN! Post-2015.12 software cannot support HHT-WIN! If you need HHT-WIN, please choose V2015.12 MB SD C4 Software HDD
2. So far, Mercedes bus diagnosis & programming can be done via DAS only, NOT Xentry.
3. If you need MB SD C4  Software SSD, you can choose  MB SD C4 Dell D630 SSD
4. If you need offline programming, you can buy old V2012.11 MB SD C4 Software HDD with Offline Programming Function

2018.12 software works with MB SD Connect Compact 4 for the latest Mercedes Benz cars and trucks. The new generation Star Diagnosis compact 4 is the latest Mercedes Benz diagnostic equipment on market for all MB vehicles, new and old.

MB SD C4 Software FUNCTIONS
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

Testable system:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
Bz ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Product software includes: (Version: 2017 )
1. D-A-S / Xentry 2017.07: the automatically Diagnosis Assistance System
Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car system testing
2. W-I-S net 2017.01: Workshop Information System
Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3. EPC.net 2017.01: Electronic Parts Catalog
4. ST Finder: Part Location Finder options: 2008 and 2016
5. STARUTILITIES : the movement management system and self-test
6. SDMEDIA 2014
7. PL71: 2016 Mercedes software with PL70