Category Archives: Uncategorized

  • October 10, 2018
  • 0

How to solve the problem that BMW Icom A2 A3 host can’t be connected?

Category : Uncategorized

Aftre the BMW diagnostic tool BMW ICOM host is connected to the car via a 16PIN connector, and the other side is connected to the computer via a network cable. Your BMW ICOM lan and system lights will light up. As follows:
19.1

But at this moment,the host can’t be found in the computer.As follows:

19.2

When meeting the problem,please update your BMW ICOM firmware as the following method:

1.Please connect Autonumen.com BMW ICOM to the computer vith network cable and power on the BMW ICOM with a 12V power adapter.

2.Open the website address http://169.254.92.38:60080/by IE browser, username:root   password:NZY11502.

3.Click the “update firmware”，it will show ICOM firmware version information.

4.Choose the file ICOM-BootImage-01-11-01.bin,set image type to SYSTEM，click “Send the file”.

5.When shows “Write the image file to the flash?”，click “Yes”,then ICOM light turns red.

6.When shows “The SYSTEM IMAGE update was successfull”，click “Update Firmware”.

7.Choose the file ICOM-ApplicationImage-01-15-01.bin，set image type to APPLICATION.Click “Send the file”.It will takes a few minutes because of a little large file.

8.When shows “Write the image file to the flash?”，click “Yes”，then the ICOM light turns red for the second time.

9.It is all normal,click “reboot”.

After finishing these steps,please connect again,the ICOM host will be found in the computer,as follows:

19.3

  • October 10, 2018
  • 0

MB Star diagnosis C3 and MB SD C4

Category : Uncategorized

The difference between MB Star Diagnostic Tools C3 and MB SD C4 is vey complicated, so i collected some data about them to let you know. Here we take one of my customers’ case as an example to share with you about how to find a right way to deal with MB STAR diagnostic system.

Hello, I am new to STAR diagnosis field. I have been considering all of these questions:

1. All MB STAR system are look similar (Super MB STAR C3, MB STAR C3, SD Connect C4), are they all different?

2. Is the MB STAR diagnostic tool can operate on a Virtual machine? The shops sell Star tools with T30 and Dell 630 are running on Virtual Machine?

3. Can we order a MB STAR (C3 or SD C4) multiplexer + cables and install DAS/XENTRY alone (ie not buy everything HDD)?

4. What is the difference between MB STAR DAS and Xentry software?

That’s a lot of questions, but it is difficult to find clear and precise answers. So I leave it to you! I’m interested in explanations, information, links etc, in French or English, Thanks!!
And following are the vipprogrammer.com customer’s clear & precise answers:

First.
a. All STAR system shares the basic diagnostic software, like DAS, XENTRY, WIS, ST Finder etc. Super has much more software than other star diagnostic systems. Super MB SATR C3 has Develop Mode, Smart TAN code etc software etc that other Star tools does not have.

b. Super MB STAR C3 multiplexer can be updated online.Autonumen.com MB SD C4 and MB STAR C3 do not support update.

c. MB SD Connect 4 is the newer and most respected Star tool for Mercedes models.

d. Best price MB SATR C3 version cannot support Benz trucks. Other Star multiplexers work both cars& trucks.

Second. Yes, MB STAR external software HDD can be loaded on Virtual Machine. If you get T30 or Dell D630 format HDD, you can only loaded it on T30 or Dell D630 laptop. If you buy external HDD, you can install it on Virtual Machine. But internal HDD runs faster than external HDD.

Third. If you need to buy Star Multiplexer without HDD, then go for this: Best quality MB STAR C3 without software HDD. The better suggestion is that you get the MB SD Connectand Dell D630 laptop which software in pre-installed, you did not need to install software by yourself.

Forth. MB STAR DAS: the automatically Diagnosis Assistance System
Xentry: New software released by Benz Company to diagnose new cars.

DAS in old software

XENTRY is newer software
The Star diagnostic tool it self determines which software you are going to use. That means STAR diagnosis will read your vehicle and enter into Xentry first, if your vehicle has to be done via DAS, it will go into DAS, otherwise it will stay in XENTRY)

Multiplexer STAR Compact 3 (Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to October of 2006, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

  • October 10, 2018
  • 0

FAQ MB Star C3 Diagnostic Tool 2015.03

Category : Uncategorized

Autonumen.com MB Star C3 Diagnostic Tool 2015.03 is a professional and excellent diagnostic tool for trucks and new types of cars. This version of MB STAR C3 can fit all computers which is not only limited on IBM T30, to provide great convenience to customers. MB Star C3 Multiplexer has one hard disk contain DAS and WIS system.
Many customers meet lots of problems and do not know how to solve when using MB Star C3. This article will focus on this point.
MB Star Diagnostic Tools MB Star C3 Diagnostic Tool For BENZ Truck and Cars has past truck test and can be used to do Benz trucks.
1Q: How to do MB Star C3 self diagnostic?
A: Please follow the next instruction to do self diagnostic.
Step 1. Click “STAR UTILITIES”

Step 2. Enter “Star Utilities”, click “Self Diagnosis” and then click “Caesar Self Diagnosis”.

Step 3. The self-test has started, please wait.

Step 4. This is Self-diagnostic report

2.Q: Star C3 got error reading: StarUtils Save not successfully-licCheckLicense XENTRY Diagnostics
4 – StartKey can not be decoded or scheme is not recognized, or appID unknown.
A:
1. “Xentry can’t active, save not successfully”?
Step1. Please reset your computer date to a specific date that three months later than the C3 version (for example, if the C3 is 2013.05, then the computer date should be reset to 2013.08. 2). Step 2. Please activate again. There is a .pdf file named [Open your Star 2013.05] on the C3 operation window, which step-by-step shows how to activate MB star and also we have video demo at

column.
Step 3. If it still can’t be activated after you reset the computer system time, please go to Local Disk (: C) and delete [lic-key2]. Then try to active again.
2. StartKey can not be decoded or scheme is not recognized, or appID unknown?
Please restart your computer or wait for a longer time, and it will display as follow:

3.Q: When I active Xentry, the [Start date] is not as the same as the date you give me, does it need to set time firstly?
A: You only need to set the computer system date. The [Start Date] and [Finish date] is set by us, so just ignore them.

4.Q: I connect Star C3 to the car and the computer, the COM port is also set, but I got the following error.

A: Firstly try to do a self-diagnostic to see whether Star C3 is connected well with the computer and the car, whether it has communication between Star C3 and the software driver or whether the settings is correct. Then according to the self-diagnostic report, you can reset the incorrect operation.

Published on mb star c3

  • August 14, 2018
  • 0

Best Quality Porsche Piwis Tester II V18.100 with CF30 Laptop

Category : Professional Diagnostic Tools , Uncategorized

Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access

Professional Diagnostic Tools Piwis Tester II with CF30 Laptop For Porshe

1. Software Version: V18.100
2. Laptop: CF-30 (Second Hand) —Software is inside the Hard Drive. No need Installation
3.Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (One Year for Free, It can not be updated online, you need to return hard disk to us for upgrade, 200USD for one time update after one year.) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth,GPS and Navigation Function are available. But you need to pay for the authorization of them.
7. Support Key Programming function,cost 220USD per time ( you need consult our customer sevice first with the type and year of your car)

8. Professional Diagnostic Tools Porsche piwis tester ii FAQ

Note:
1:Please do not take out the hard disk from CF-30 laptop and install on other laptops, it may cause data lose and hard to recovery.

2: This model is best quality .and they are include the box and manual.

Autonumen.com Porsche Piwis Tester II Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

FAQ:
Q1: How to accomplish Porsche Piwis Tester II online function?
A1: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about Porsche Piwis Tester II?
A2: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?
A3: The first year software update fee is free.

Q4: How to update Porsche Piwis Tester II?
A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?
A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?
A6: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Q7: Where could get Laptop Power-on Password?
A7:  Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

  • August 1, 2018
  • 0

What Do You Know About MS908CV ?

Category : Uncategorized

The Autel MaxiSYS commercial vehicle diagnostics scan tool, No. Autel MaxiSYS MS908CV, performs enhanced system diagnostics on more than 60 commercial light duty, medium duty and heavy duty vehicle brands. The MS908CV is built on the MaxiSYS Android-based platform. The complete tool kit comes with the latest compact size J2534 MaxiFlash Elite to perform pass-thru programming function and complete an array of of tool-guided maintenance services, then diagnose manufacturer specific systems including Allison transmissions, Bendix ABS brake systems, Detroit Diesel Engines and Eaton and Wabash ABS trailer brakes.

As a new member of Autel’s MaxiSys family, the Heavy Duty Diagnostic Tools MaxiSys CV is built on the powerful MaxiSys 908 platform and provides a comprehensive disgnostic solution for virtually all commercial vehicles as well as machines made in North America, Europe and Asia. Offering advanced features and extreme ease-of-use, MaxiSys CV is the ideal solution for independent repair shops, owner-operators and various sized fleets seeking a single scan tool for all their professional heavy duty needs.

Built on the MaxiSYS Android-based platform, the MaxiSYS CV performs enhanced system diagnostics on more than 60 commercial vehicle brands. Read and clear codes, view and graph live data, perform tool-guided maintenance services, complete an array of special functions and diagnose manufacturer-specific systems including Allison transmissions, Bendix ABS Brake systems, Detroit Diesel Engines and Eaton and Wabash ABS trailer brakes. 1-Year Warranty Included.

The complete MaxiSys CV tool kit includes a compact sized MaxiFlash Elite which performs J2534 and J2534-2 pass-thru programming and provides bluetooth VCI communication between the vehicle and MaxiSys CV tablet.

See more

  • July 25, 2018
  • 0

How to diagnose vehicle fault code by BMW ICOM and ISTA-D software

Category : Uncategorized

Today illustrate how to diagnose vehicle fault code by BMW diagnostic tool BMW ICOM and ISTA-D software：Check all car module status，and delete fault code memories.

Tool used:Autonumen.com BMW ICOM A2 WIFI or BMW ICOM NEXT

Software used:BMW ICOM HDD ISTA-D 4.06.31

Step1:Connect vehicle with ICOM,open ISTA-D 4.06.31.

First you need test your car.Go”Vehicle information”→”Control unit tree”→”Star vehicle test”.

Click “Yes”.
20.1

Step2:Finished the vehicle test,fault module will show yellow or red.

Yellow means wrong memory,red means no response,whole green means no any problem.

Click “Display fault memory’’,check fault code.

20.2
Step3:Go “Vehicle management”→ “Troubleshooting”→”Fault memory”.

You can check the fault illustration with fault code,and double click every item and correspondingly show the detailed description.

20.3

(“Calculate test plan” button guides to check fault.)

Just click ”Clear error memory” and “Yes”.If it is not serious problem,all module will turn green.

20.4

20.5

20.6

  • July 25, 2018
  • 0

MB SD Connect C4 change Mercedes time and date in cluster

Category : Uncategorized

Here is the instruction on how to change MB Star Diagnostic Tools MB time/date with 2017.12 SDConnect C4 DAS/Xentry software.
15.1
Equipment:

I have bought Star Diagnostic multiplexer with DAS/Xentry software on  www.autonumen.com.

I think it’s cheaper than other places.

Follow the steps:
1. Install and activate the software. Software is pre-installed and activated if you get the MB SD Connect C4 multiplexer and Dell D630 laptopbundle package.
2. Connect MB SD C4 system with vehicle via OBD port
3. Run DAS software
4. Come to the main Control units group menu->F3
5. Select Information and communication option->F3
6. Select IC Instrument Cluster->F3
7. Select Diagnosis to plant specifications->F3

15.2

8.Select Control unit adaptations->F3

15.3

9.Select Control unit adaptations (Variant coding)->F3

15.4

10.Select Variantkodierung ->F3

15.5

11.Select Datumsanzeige Grundbildebene and turn date on “ein”

15.6

12.Select Menu 24 option and activate key dependency to “aktivieren” to active the status.

15.7

13.Reboot the cluster. The whole procedure is complete.

Just follow the steps above,you will have a wonderful experience with SD Connect Compact 4.

  • July 25, 2018
  • 0

How to DIY MB Star Diagnosis

Category : Uncategorized

This is a post I read on the forum and find that it get lots of good comments, so I think there may be more people need and post on the blog for sharing.

I would help out a few Autonumen.com MB brothers with a couple star diagnostic tutorials…

Note: this is DAS/XENTRY Software with mb star diagnosis.
Free download: http://down.mbstarsgop.com/download/xentry.zip

First, Lowering the car.
Get to the 211 Section.

You will get to the main menu

Then go to Function performed by more than one control unit.

Then Chassis

Then Level adj

Then Suspension

And here is where people have problems, they just go to actuations and then lower it, IT WILL NOT STAY LOWERED this way, you have to go to initial startup

Then Initial with manual settings

Then F2

Here you will see a screen that shows the voltages which correspond to the height of the vehicle. they must be within the given ranges in the left hand column. use the + and – buttons to lower the car (In my screenshot I am in the car with a friend in the back seat, so that is why it is at 3.27, it should not exceed 3) Then hit F2

Enter in these inclination angles and if the car is within the voltages supplied in the page before, the car will accept the new lowered setting, if not it will reject it.

Now, how to activate the unlock and lock beep (honestly, one of the best mods to do if you have an older model e55)
First Control units

Then Body

Then rear SAM

Then Control unit adaptations

Then national version of ATA function

At this screen you will see a pull down menu with a list of different regions on it. The only ones you need to worry about are USA with buzzer and Netherlands. If you choose USA, i will give you three short quick beeps when you lock the car and one short when you unlock it. Netherlands will give you three longer beeps when you lock the car and one long when you unlock it. Personal preference on which one you like. Then hit F3

Then F3(YES)

Hope this helps out some people. I really did not find a good DIY for Star Diagnostics, so I thought I would help out!

Published on mb star diagnosis

  • July 25, 2018
  • 0

Where to find good wholesale Launch X431 Tool

Category : Uncategorized

Launch X431 Tool is cheap , but if you can’t find the good supplier you can buy the wholesale launch x431 tool , so here I want to share some useful experience about how to find a good launch wholesale supplier and give the useful knowledge details about the x431 tool description.

First , see here, this is the short description about the launch x431 tool .

Autonumen.com x431 master major functions involve the simulation and test for all sensors on vehicles. Under simulation conditions, it can receive the control signal from X-431 main unit and carry out all the commands. Under test conditions, it can transfer the data back to the main unit in accordance with the control signal given by the main unit.

Under test condition, the latest data can be recorded in the form of curve. This puts the change of the test data right in front of your eyes and is highly significant for process analysis. In particular, it is good for the capture of remittent changes in the process.
Under voltage simulation condition, the user will be able to make any change to the voltage under simulation by dragging the icon indicating the voltage. This enables the simulation of any imaginable voltage change and gives more flexible and more accurate sensor simulation.

Somebody has write this article about the technology of the launch x431 tool .

Second , we have know the details technology about the launch x431 tool , but where to find the good launch x431 tool supplier and where to buy the wholesale tool?

Here I suggest you go to find the chinese suppliers , Because , if you buy the wholesale from the chinese supplier you can save lots of money, why I say so , for example, this tools is just, if you have brought six tools from the one supplier it will be so , the most important way is to find the good chinese supplier , I think VtoolShop is good choose , here you can see the ture tool images from it.

You can see from this picture , it’s the launch x431 tool. If you buy the wholesale tools. It may save you a lot of money.

Third , you must know that the wholesale supplier is good in China, you can make a discount from them .There three tips I suggest you to buy a wholesale x431 tool is good for you .

Published on launch x431

  • June 20, 2018
  • 0

2018 CAR FANS C800 Heavy Duty Truck Diagnostic Scan Tool with Special Function better than Launch and Autel Heavy Duty Diagnostic Tool

Tags :

Category : Heavy Duty Diagnostic , Uncategorized

Heavy Duty Truck Scanner CAR FANS C800 is fully optimized based on the OEM scanner, which enhances the comprehensive diagnostic capability of the diesel vehicle. Some of the functions are based on the advanced technology accumulated by the R & D team for many years, and are superior to other similar diagnostic products in the industry. The main diagnostic functions include reading the version information, reading/clearing the fault code, actual values, actuators, advanced function (special function, matching settings, functional test, diesel calibration) and so on.

CAR FANS C800  Feature:

C800 Heavy Duty Scanner Vehicle List:

Commercial Vehicle: FAW,DONGFENG,Mercedes-Benz,CNHTC, FOTON, SANY, JAC, SFH, CAMC, UD, VOLVO, Mitsubishi, IVECO, MAN, SCANIA, JMC, HINO, ISUZU, SHACMAN, C&C, Hyundai, XCMG, BEIBEN, KIA, KING LONG, YUTONG, HIGER, GOLDEN DRAGON, YOUNGMAN, BYD, ANKAI, DAEWOO, SUNWIN, ZHONGTONG, HUANGHAI, WZL, SUNLONG, TOYOTA, ASIASTAR

Passenger Vehicle: Mercedes-Benz, Hyundai, VW, Zhonghua, JMC, GreatWall, ZZNISSAN, JAC, ZXAUTO, DONGFENG, LIEBAO, CHERY, FUDI, GONOW, HUATAI, SSANGY, MAXUS, JX-ISUZU

Machinery: CAT, KOMATSU, VOLVO, SANY, LOVOL, JOHN DEERE, HITACHI, KOBELCO, HYUNDAI, ZOOMLION, CASE, LISHIDE, DOOSAN, SUMITOMO, YUTONG, Bobcat, SHANTUI, LiuGong, IHISCE, XCMG, KUBOTA, Takeuchi, XGMA, Atlas, TEREX, YUCHAI, LONKING, SUNWARD, SEM, Jonyang, PENGPU, YTO, JAC, XINYUAN, DXZG, HENGTE, SANYUAN, HUANGHE, SHUNTONG, STRONG

Engine &ECU:  Bosch, Denso, Delphi, Perkins, Deutz, Weichai, Yuchai, Fawde, Cummins, Yunnei, Changchai, SDEC, DCD, Yangchai, Quanchai, EUP, JX-Isuzu, XCE, Kernel, SIDA

C800 Truck Diagnostic Tool Function:
Identification
Read Fault code
Erase Fault code
Actual Values
Actuators

Advance Functions:
Adjustment/Settings、Function Test、Special function, calibration etc.

CAR FANS C800 Main Unit:
① Touch Screen：Display the operation buttons, test results and help information.
② Rubber sleeve: easy to hand, protect the product, to prevent loosening and wear.
③ Power Indicator
④SD card port
⑤USB port：Used to connect the printer for printing. diagnostic connectors to connect the car.
⑥ Network connection port: Reserved.
⑦Diagnostic port: provides power, uses diagnostic lines and
⑧Power socket: power supply, connection with the car or the vehicle diagnostic port without power supply.
CAN FANS C800 Software Update:
C800 use PC software to upgrade, log in the official website (www.carfans.net.cn) download and install the C800 intelligent diagnostic device upgrade
client software, the device SD card through the card reader plug in the computer USB interface to complete the device software upgrade.Detailed upgrade
steps, please log in the official website (www.carfans.net.cn) view the product upgrade process.
CAN FANS C800 Heavy Duty Diagnostic Tool Technical Parameters:
CPU: ARM9
SD Card: 4G Maximum Support 32GB
Communication port: OBD,USB
Input voltage: 7-32V
Power: <10W
Screen: 7 inch 800×480 touch screen
Operating temperature: -10~45°C
Storage temperature: -15~50°C
Operation method: Touch

See more click:http://www.autonumen.com/

Next Page »

OBD2 Diagnostic Tool Links

OBD2 Scanner
Auto Diagnostic Tools
OBD2 Diagnostic Tools
Car Diagnostic Tools
Auto Scanner Tools
Autocom CDP
Auto key Programmer
Launch X431
Launch CRP123
CK100
BMW ICOM
VCS Auto Diagnostic Tool
ELM Family
Autoboss Tools
Autel Scanner
Heavy Duty Diagnostic Tools
VAG COM
Mileage Correction
MB Star C3
MB Star C4
autotool.us

Recent Posts

Archives

Categories

Pages