Category Archives: Professional Diagnostic Tools

  • July 16, 2019
  • 0

How to using Piwis Tester II code Porsche rear end electronics

Tags :

Category : Professional Diagnostic Tools

V18.100 Piwis Tester II Diagnostic Tool For Porsche With CF30 Laptop High Quality

Top 7 Reasons to Get Porsche Piwis Tester II
1. Software Version: V18.100 (Return back the hdd for update,or can update directly, update cost is different according to the QC number,if the last three numbers of your QC mark is 137,hdd cost is70USD,if the last three numbers of your QC mark is 098, hdd cost is 176USD, contact customer sevice for more details )
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (Need to return hard disk to us for upgrade, or you can just buy from us another hdd with newest software) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But need to pay for the authorization of them.
7. Support Key Programming function, cost 220USD per time (you need consult our customer sevice first with the type and year of your car)

Notice:
1. Please do not take out the hard disk from CF-30 laptop and install on other laptops, it may cause data lose and hard to recovery.
2. Piwis Tester II works with Porsche cars year after 2005
3. when you connect with device,you will get an indication “Found New Hardware Wizard”,make sure you click “next” to continue installing the driver, ortherwise the piwis 2 cannot be recognized by computer
piwis 2 Found New Hardware Wizard

Piwis Tester II for Porsche Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with car year after 2005 and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

20.1

20.2

20.3

20.4

20.5

20.6

20.7

  • July 10, 2019
  • 0

Knowledge for Porsche Piwis Tester II

Tags :

Category : Professional Diagnostic Tools

Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access .

20.1

20.2

Porsche Piwis Tester II Functions:

1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with the old and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars.

For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.

3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Piwis Tester II Vehicle Coverage:
1. 911(997) (991)
2. Boxster/Cayman (987)
3. Cayenne up to MY 2010
4. Cayenne from MY 2011
5. Panamera
6. Support 2013 year Porsche car models

FAQ:
Q1: How to accomplish Porsche Piwis Tester II online function?
A1: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about Porsche Piwis Tester II?
A2: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?
A3: The first year software update fee is free.

Q4: How to update Porsche Piwis Tester II?
A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?
A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?
A6: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Q7: Where could get Laptop Power-on Password?
A7: Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

20.3

20.4

20.5

20.6

  • June 25, 2019
  • 0

How to using Piwis Tester II code Porsche rear end electronics

Tags :

Category : Professional Diagnostic Tools

V18.100 Piwis Tester II Diagnostic Tool For Porsche With CF30 Laptop High Quality

Top 7 Reasons to Get Porsche Piwis Tester II
1. Software Version: V18.100 (Return back the hdd for update,or can update directly, update cost is different according to the QC number,if the last three numbers of your QC mark is 137,hdd cost is70USD,if the last three numbers of your QC mark is 098, hdd cost is 176USD, contact customer sevice for more details )
2. Laptop: CF-30 (Second Hand)—Software is inside the Hard Drive. No need Installation
3. Support Languages: Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch
4. Update Method: By HDD (Need to return hard disk to us for upgrade, or you can just buy from us another hdd with newest software) Software contains operating system win XP only. you just need to insert into your computer and use it.
5. Requires Online Modules: (F BCM R BCM DME ELV SRS KEY)
6. Bluetooth, GPS and Navigation Function are available. But need to pay for the authorization of them.
7. Support Key Programming function, cost 220USD per time (you need consult our customer sevice first with the type and year of your car)

Notice:
1. Please do not take out the hard disk from CF-30 laptop and install on other laptops, it may cause data lose and hard to recovery.
2. Piwis Tester II works with Porsche cars year after 2005
3. when you connect with device,you will get an indication “Found New Hardware Wizard”,make sure you click “next” to continue installing the driver, ortherwise the piwis 2 cannot be recognized by computer
piwis 2 Found New Hardware Wizard

Piwis Tester II for Porsche Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with car year after 2005 and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Piwis Tester II Support Systems:
ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

  • June 18, 2019
  • 0

GM MDI software has updated to V2017.09 and “No Connection” error solved

Tags :

Category : Professional Diagnostic Tools

1.Software update

1). Our GM MDI software has updated to V2017.09.It can support 2010-2017.09 year new cars.

2). If you think installation procedure is difficult for you,you can choose the GM MDI with Lenovo E49AL laptop,GM MDI software will be preinstalled in the Lenovo E49AL Laptop ,you can use it directly after receiving it.

10.1

2.“No Connection” error solved

Here is the detail explanation of GM MDI WIFI multiple diagnostic system “no connection” error and solution.

Problem:

When get the Professional Diagnostic Tools GM MDI tool connected with computer and plugged into car’s DLC OBD port, only two of the indicator light flashed while the other two are off. And then the GM MDI software system displayed “no connection” error message. See Fig.1 and Fig. 2.

10.2

10.3

Possible reason:
Improper operation procedure leads to the communication failure.

Solution:

Quit the GM MDI software and disconnect the GM MDI main unit
Open MDI Manager to check the driver
Open “Network setup” to check the network condition
If your MDI Manager shows a connection with your MDI and says software is compatible with pc, it is OK.
Reconnect the MDI device and load software again.

Follow the correction connection procedure and settings:

USB connection:

Once install and run the MDI manager, power up the MDI tester using the A/C 12-volt adapter. Then connect it to your computer with via USB cable.  The MDI appears in the application’s Explorer window where all the MDI units detected by your PC.

WIFI wireless connection:

1) Click MDI_Manager icon to start the MDI Manager software
2) Connect MDI with PC using USB cable
3) Power on the MDI by plugging in the A/C 12-volt adapter
4) Select and Connect to your MDI in the MDI Manager software MDI Explorer tab.
5) Select “Network Setup”
6) Select “Wireless” tab.
7) Select “Enable Wireless Interface check box in the Interface Control box to enable the interface. Once you enable the interface, the IP Address Configuration box and the Apply and Cancel buttons become active.
8) Select Obtain an IP address automatically if your LAN automatically assigns IP addresses. Otherwise enter the assigned IP Address and Subnet mask.
9) Select “Access Point” to start wireless access configuration.
10) If you are not within range of the access point you want to use, or the access point is not broadcasting its SSID, select the Enter Network Name [SSID]: radio button and type the network name.
11) If you are within range of your wireless access point, choose the Select from available network list radio button and then select Refresh to cause the MDI to search for wireless network signals. The detected networks are displayed in the Network Name box.
12) Select Configure after you have entered the network name
13) Enter the security setting that are required by your network, then select Next.
14) Select Yes to re-configure your MDI, or if you want to start over select No.
15) Select OK.
16) Choose the Properties tab to verify that the MDI is configured correctly.
17) Write down previous settings you did for future reference.

NOTE:

Installing the MDI Manager software installs certain utilities that are required for your TIS2Web programs to use the MDI. But, it is not necessary to start the MDI Manager software before using TIS2Web programs.

  • May 21, 2019
  • 0

How to update Nexiq firmware with John Deere SA

Tags :

Category : Professional Diagnostic Tools

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

  • May 14, 2019
  • 0

John Deere Service Advisor 4 Free Download

Tags :

Category : Professional Diagnostic Tools

Free download John Deere Service Advisor 4.2 software full (incl. John Deere Service Advisor  4.0 Agriculture, Construction and Forestry, Commercial and Consumer Equipment version):

John Deere Service Advisor v4.2.006 AG 02.2016 + CF 05.2016 + CCE 05.2016.rar

https://mega.nz/#!ZTZVVLSD!RwWIbUvhH1gXRTBujS-cThq1kWLwx2C1fUJD8eIewgM

John Deere Service Advisor 4.2 activator.rar

https://mega.nz/#!ADgl0YiC!yVtJgEPJrQC6sCaQYY1-QGzWRiwfZFLyYPlJhGgtw0M

Password: John Deere Service Advisor v4.2.006 AG 02.201613021973

Version: V 4.2.006
Year: 05.2016
Size: 168.36 GB
Region: All regions
Type: Service and Repair Information
Languages: English
Developer: John Deere
Brand: Agricultural Machines
Windows: Windows XP 32 bit, Windows 7 32 bit, Wnidows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit

Security: Unknown – YOU ARE TRYING ON YOUR OWN RISK
It’s a customer share @ jahacmm via mhhauto

YOU CAN HAVE John Deere Service Advisor Full CRACK BUT TESTED 100%:
John Deere Service Advisor for customers:
https://www.autonumen.com/goods-5236-John+Deere+Service+Advisor+EDL+V2+Electronic+Data+Link+Truck+Diagnostic+Kit.html
Tested by professionals
Verified to work with John Deere EDL V2 clone

Software confirmed:
John Deere Service Advisor 4.0 Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.
John Deere AG Management Solutions, Attachments, Backhoes, Combines and Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages, MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers, Sprayers, Sugar Cane Harvesters, Tillages, Tractors, Worksite Pro Attachments.
John Deere Service Advisor 2.8 CF (Construction and Forestry), workshop service manual, repair manual, diagnostic, electrical wiring diagram, hydraulic diagram John Deere.
John Deere Service Advisor 4.0 CCE (Commercial and Consumer Equipment)dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools, assemble and disassemble presented all models John Deere Construction Equipment and some models Hitachi, Euclid, Bell and Timberjack.

John Deere Service Advisor install: Tested & confirmed no issues on  Windows XP VMware via Win XP,Win 7,Win 8 and Win 10.  Tested software comes with HDD- NO NEED iinstall sw yourself; that is install HDD on your laptop and use it.

  • April 22, 2019
  • 0

John Deere Service Advisor with Nexiq clone 90% Worked

Tags :

Category : Professional Diagnostic Tools

FYI, John Deere Service Advisor 90% works with Nexiq China clone.

Topic 1: John deere SA possible with NEXIQ USB Link?

It is possible to install Professional Diagnostic Tools John Deere Service Advisor on your laptop, though the installation is really complicated. If you have a Lenovo Thinkpad laptop, the easiest way is to restore the main partition from the image of my computers’ c: drive. And every time i change my laptop, i just restore it.

Win7 installed and fully updated. It takes hours.

The image will not work on XP, but SA works fine. My suggestion, buy used Lenovo T400 or T500. it’s more or less 250 EURO in Europe. Install windows 7 and then can put my image. Takes 10 minutes and u have SA working.

Topic 2: How to get Nexiq china worked?
I spent a month doing research on this and i managed my Heavy Duty Truck Scan Tool Nexiq to work 90%. The thing is that Nexiq has only 2 channels while EDL has 3. The 3rd one is Powertrain and it is used very seldom. E.g. I reprogrammed all the controllers on 6690 premium except two, but found a way around it opening the pld file with pld editor and changing Powertrain channel to Vehicle (channel 1). Lots of machines don’t even have a 3rd Powetrain channel. Like all 5R; 6115R, 6125R, 7280R….. From my experience only the older machines have it and still can be programmed most of the time. Programming controllers is easy, but diagnostics is a bit annoying. Every time you establish the connection u have to remove the USB plug and plug it again for the readings to appear. Connection establishment is taking a long long time and you never see the ECU. Only all the other controllers. So all the time something doesn’t work. If you are prepared for this here is what you have to do:

a) Rewire the the cables as shown in the picture in my post here:
I switched places channel 1 with channel 2 (see the pic) with my Chinese version and now it works fine, probably it was possible to do it adjusting the software settings as mentioned above, but i tried a lot, and nothing helped. Now i can connect, tried with 6125R and 5070M. Works fine!!! Except one very important thingy. After i establish the connection, all the reading give the same meaningless number. Then, I discovered accidentally, I pull out the USB cable, get the message “Connection interrupted” I put it back in, get the message “Connection resumed” and wuolla, all the readings show up immediately.

b) You don’t have to change the firmware. Both will work pretty much the same but with different issues.

P.S. For diagnostics only, there is a subprogram of SA that works without any cable rewiring, it doesn’t have a Program Controller option, and you still need to reinsert the usb after connection has been established. You just need to select the right port (which is usually 1939ImplementAutoboud or 1939AppAutoboud depending on the machine) and model. If you have SA, you will find the software at c:\Program Files\Service ADVISOR\xvds\XJDET.exe

Just to let you know, after a year working like that, i bought another EDL (recommended by a folk in the forum, much much much more than the old one)
So much relief

  • April 16, 2019
  • 0

PIWIS TESTER II V12.8 Released Free Download

Tags :

Category : Professional Diagnostic Tools

PIWIS TESTER II V12.8 Free Download and Upgrade Steps

PIWIS TESTER II V12.8 Free Download and Upgrade Steps, if you want to buy this item, please click this link.
9.1

We released the Piwis Tester II v12.8 for Porsche which is able to work with the latest models till 2014 year.

This new version Piwis tester ii added new database for wiring diagram system as well as the trouble codes. Users are very easy to operate when using this software.

The Piwis Tester II v12.8 is the version for Porsche 2013-12, you and also upgrade your software by using the upgrade software DVD. You can download the PIWISER TESTER II Upgrade software by this link.

How to upgrade Piwis Tester II software?

1.Put the Upgrade DVD into your DVD Rom.
2.Choose Tools- software upgrade
3.Then the software will be install automatically

The total process of upgrading will cost around 40 mins or so, please make sure your laptop Panasonic CF-30 with power supply and never shut off during upgrading. If your software is V12.1 or lower, we strongly suggest you upgrade the version one by one. (e.g. Your software is V11.7, you gonna upgrade to v12.1 then upgrade to 12.4, then 12.8)

Below are some screen shots of the Piwis tester II V12.8
9.2
9.3
Notice:

This upgrade will not effect the 90 days expiration solution, and you DO NOT NEED Connect to internet to verify the software after the upgrade installation finished! If you still have any questions about the upgrading, please kindly contact with our online customer service.

  • April 9, 2019
  • 0

Piwis 3 Reviews For Porsche Piwis Tester III Scanner

Tags :

Category : Professional Diagnostic Tools

Latest generation Piwis tester 3 with V37.250.020 Software support Porsche Car till 2018. We sell the Piwis Tester 3 with Panasonic CF-54 full system installed V37.250.020 Piwis 3 software installed full system ready to use. Most client inquiry the Piwis 3 detail for Porsche Diagnostic & Programming, Below share Piwis Tester 3 with V37.250.020 Piwis 3 software For Porsche Piwis III FAQ.

Piwis Tester III With V37.250.020 Piwis 3 software Installed Panasonic CF-54 Completely

24.1

Q: Can V37.250.020 Software for Porsche Piwis III perform all the functions of Porsche Piwis II?

A: Yes, Piwis III is compatible Porsche Piwis II, for Porsche that means Porsche Piwis Tester III includes all the functions of Piwis II.

Q: How to update V37.250.020 Piwis tester III Software Future?

A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually, the software updates 1-2 times per year.

Q: Can Piwis Tester II update to Porsche Piwis Tester III V37.250.020?

A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: Can I use my personal computer?

A: No, the computer and the device is bound together. Because The Piwis III V37.250.020 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will have no nonsense.

Q: Why need Piwis III V37.250.020?

A: Because Piwis II can’t work with the Porsche after the 2017 year. Only Piwis III V37.250.020 can.

Q: Piwis Tester III programs IMMO & Key online?

A: Yes. It Support.

Q: Does Piwis Tester III support Wifi?

A: Usually, the device is offline version and WIFI is disabled so that you don’t need to activate every 15 days.

Q: Can Piwis Tester III connect to the internet?

A: Yes. It is allowed.

More detail about Piwis III For Porsche Piwis Tester 3 Scanner PST3 Interface with Panasonic CF-30 laptop full set just contact us freely.

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com

  • April 9, 2019
  • 0

Porsche Piwis Tester II V15.6 with CF30 Laptop or Lenovo E49AL Laptop

Tags :

Category : Professional Diagnostic Tools

Some of my customers let me recommended which auto diagnostic tool is good for Porsche , I recommend Porsche Piwis Tester ii for all of you who also have any request. By the way , we have a big promotion for it on this month , you can buy it with laptop , only need USD1188/set .

Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access .The latst software of it is V15.6 ,and can support multi-language , sucha as : Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch .

The systems which it can support as following :

ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Please check the FAQ for Porsche Piwis Tester II as bellow :

Q1: How to accomplish Porsche Piwis Tester II online function?

A1: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about Porsche Piwis Tester II?

A2: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?

A3: The first year software update fee is free.

Q4: How to update Porsche Piwis Tester II?

A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?

A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?

A6: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Q7: Where could get Laptop Power-on Password?

A7: Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

Now , how is your opinion for our porsche piwis tester ii ? Welcome to contact us any time .

Q8:Where does this product come from?

A8:This product comes from https://www.autonumen.com/.

Next Page »

OBD2 Diagnostic Tool Links

OBD2 Scanner
Auto Diagnostic Tools
OBD2 Diagnostic Tools
Car Diagnostic Tools
Auto Scanner Tools
Autocom CDP
Auto key Programmer
Launch X431
Launch CRP123
CK100
BMW ICOM
VCS Auto Diagnostic Tool
ELM Family
Autoboss Tools
Autel Scanner
Heavy Duty Diagnostic Tools
VAG COM
Mileage Correction
MB Star C3
MB Star C4
autotool.us

Recent Posts

Archives

Categories

Pages