Category Archives: Autel Tools

  • 0

bluetooth Nexiq USB Link 125032 Diagnostic Adapter for sale

Nexiq USB Link 125032 Diagnostic Adapter is nexiq data link adapter adds Bluetooth function. Bluetooth Nexiq usb link new added wireless protocol that connects electronic devices while they are close to each another. We have Nexiq from china Nexiq usb link bluetooth version for sale.

Bluetooth Nexiq from china Nexiq usb link for sale Nexiq adapter

(Bluetooth Connection Password: NEXIQ)

1). Bluetooth nexiq from provides up to 300 feet of wireless freedom.
2). Flexible configuration supports wired or wireless connectivity.
3). Reduce reprogramming times with direct USB connection.
4). No messy cables to untangle or get in the way with Bluetooth

No cable is needed for vehicle diagnostic using the Nexiq USB Link 125032 Diagnostic Adapter. The diagnostic base system can access the NEXIQ USB link via Bluetooth or USB.

Access via Bluetooth:

NEXIQ has been set up after well connected with vehicle. The Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The COM port provides well communication between diagnostic base system and the NEXIQ USB link. After built connection with Bluetooth, the system will ask for a PIN “NEXIQ” (with all letters capitalized) to confirm Bluetooth communication. You need to specify this port when you install the diagnostic application.

Access via USB:

NEXIQ 125032 USB link can be also connected to the application PC by using the supplied USB cable. Windows detects the NEXIQ USB link through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Then NEXIQ completes setup and the diagnostic interface software is ready for use by the diagnostic application.

Operating system:

China NEXIQ125032 Driver: Microsoft Windows 2000 and XP operating systems

Autonumen.com full NEXIQ 125032 Software: Windows XP and windows 7 32-bit and 64-bit operating system

(Volvo, Hino, Perkins, Cat, and Nissan software must be installed in XP system. Other software can be used in Win7 32bit system.)


  • 0

GM Tech2 GM Scanner -CANdi & TIS

GM Tech2 GM Scanner -CANdi & TIS

10.1

The GM Tech2 is the same tester GM Scanner GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and

provides support for on-board diagnostics on all GM systems 1992 thru 2011.Car model supported: GM/SAAB/OPEL/SUZUKI/ISUZU/HOLDEN

gm tech2 scanner Specification:
1) Dimensions: 12
2) Microprocessor: 32 bit,16 MHz
3) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4) Communications: Integral RS232 communication port.
5) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .

GM Scanner GM Tech2 Features
1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

10.2


  • 0

Possible to get Piwis 3 program work with Piwis interface tester 2

This answer for the question whether Piwis 3 diagnostic program can work with Piwis interface tester II

It may be an interesting subject, I’m sure there is some information about this out here.
The Piwis 2 interface is a lot more robust piece of equipment, compared to the cheesy and flimsy looking and feeling interface produced by Actia for Piwis 3.
Originally designed for the VW ODIS system,  the VAS 6154 VCI is quite the service needy piece. [Breaks easily] not a hard comparison to make.
Porsche went cheap on this VCI for Piwis 3. [my humble opinion, way below Porsche standard!]

There is a service from Poland and Ukraine [If I remember correctly] that can make the Samtec based Piwis 2 VCI,  to work with Piwis 3, unfortunately their charges are just as much and frankly cost prohibitive as the New Piwis 3 VCI.  2-3-4 thousand  dollars for these VCIs is simply not reasonable for small  operators. They will come down in price just like the Chinese VCIs did for all manufacturers as the markets get saturated and folks are not buying them as eagerly as in the beginning of the Piwis 3 phad.
They will get as much money as the market bares. [as much as people are willing to pay]

Your more pointed answers will not come in this tread Ibi.
This is CarsFan’s money making tread, he will not volunteer any information, but if U start your own tread, U may be more likely to find out stuff.

Regards, Albert.

p.s. links

Porsche piwis 2 china clone:

https://www.autonumen.com/goods-5017-+Porsche+Piwis+Tester+II+V151+with+CF30+Laptop.html

Vxdiag Prosche piwis 3:

https://www.autonumen.com/goods-6826-VXDIAG-VCX-DoIP-Porsche-Tester-Piwis-III-with-Lenovo-T440P-Laptop.html

4.1
4.2
4.3
4.5


  • 0

VCX Porsche PIWIS III Review

Porsche PIWIS III covers Porsche Cars till 2018 year and instead of Piwis tester II.

Porsche PIWIS III (PST3) is available with Lenovo T440P version and CFAX3 PC version, that means their main differences are the hardware and the portable computer brand, they are the same internal.

Q: Any difference between the following two kinds of VCX PIWIS III tester?
5.1
Image 1: Porsche Piwis III V37.900 plus Lenovo T440P (with pre-installed Software)
5.2
Image 2: Piwis 3 V37.25 with Panasonic CFAX3 PC solid state 240G. New VCI, support for models with DoIP diagnostics after 2017.

A:

The same: Both run VCX driver (from VXDIAG Company), both have the same functions (diagnostic, online programming, programs IMMO & Key online).

The different: the outlook and compatible computer.

Q: What new Porsche models does PIWIS III tester support?

A: New Car Models Available :

Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018

All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera
5.3
5.4
Q: What capabilities Porsche PIWIS III has?

A: PIWIS III can read trouble code, clear trouble code, shows ECU information. It test live data, display actual values, and programs. On all; process malfunction navigation, showing all interior circuit diagram. Specially if Porsche were produced after 2005. The PIWIS III has original Oscillometer and multi-meter Function. It is the absolutely necessarily tool for the job.

Q: Can Porsche Piwis III V37.900 perform all the functions of Porsche Piwis II?

A: Yes, Porsche Piwis III is compatible Porsche Piwis II, that means III includes all the functions of Piwis II.

Q: Can Piwis II update to Porsche Piwis III V37.900?

A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: How to update Piwis III V37.900?

A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually the software updates 1-2 times per year.

Q: Can I use my personal computer?

A: No, the computer and the device is bound together. Because The Piwis III V37.900 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.

Q: Why need Piwis III V37.900?

A: Only Piwis III V37.900 can work with the Porsche up to 2018 year, Piwis II can’t.

Q: It programs IMMO & Key online?

A: Yes. Login online anti-theft matching programming.

Q: Does Piwis III support Wifi?

A: Usually, the device is offline version and WIFI is disabled so that you don’t need to active every 15 days.

If you have the online account and want to use our Vxdiag Piwis III, then we can enable the Wifi and you will active the software every 15 days.

Q: Can Piwis III connect to the internet?

A: Yes. It is allowed.

That’s all. Thanks

The tech support of Piwis 3 V37.25 with Panasonic CFAX3 and Porsche Piwis III V37.900 with Lenovo T440P is offered by www.autonumen.com


  • 0

Will Autel maxidas ds708 do dpf regeneration?

A Car Owner ask a questions:Does the Autel maxidas ds708 support dpf regeneration (dpf reset)?

The answer is : autel ds708 can not make dpf regeneration (dpf reset)

But I have another Autel DPF Product maybe fit for you

Autel Maxidas DPF Reset (dpf regeneration)
Autel Maxicheck Description:
Works on vehicles from 2000 onwards (OBD-2&CAN)-domestic and import
Resets the DPF light after the filter has been replaced
Performs forced DPF regeneration
Micromanages the injection rate
Resets ECU when fitting new DPF
Resets EOLYS additive lights
Retrieves/ erases DPF-related codes
Supports all 10 modes of OBDII including enhanced Mode 6 On-screen code definitions
Code cause/solution tips guide technicians to the root cause of trouble code faster, saving diagnosis and repair time
Incredibly easy to use with intuitive navigation and step-by-step on-screen instructions
Multilingual menu and DTC definitions-English and Chinese
One year free online software updates
Prints data via PC
SD memory card for data backup and software update
Autel Maxicheck Applications:
Citroen, Peugeot, BMW, Renault, Alfa, Benz, EU Ford, Fiat, Jaguar, Lancia, Land Rover, MINI, Opel, Vauxhall, Ford, Chrysler, GM, AU Ford, Acura,
Honda, Infiniti, Lexus, Mazda, Nissan, Scion, Toyota


  • 0

How Does For Porsche Piwis III Software Update? Piwis 3 FAQ

Piwis 3 Reviews For Porsche Piwis Tester III Scanner

Latest generation Piwis tester 3 with V37.250.020 Software support Porsche Car till 2018. We sell the Piwis Tester 3 with Panasonic CF-54 full system installed V37.250.020 Piwis 3 software installed full system ready to use. Most client inquiry the Piwis 3 detail for Porsche Diagnostic & Programming, Below share Piwis Tester 3 with V37.250.020 Piwis 3 software For Porsche Piwis III FAQ.

Piwis Tester III With V37.250.020 Piwis 3 software Installed Panasonic CF-54 Completely

Q: Can V37.250.020 Software for Porsche Piwis III perform all the functions of Porsche Piwis II?

A: Yes, Piwis III is compatible Porsche Piwis II, for Porsche that means Porsche Piwis Tester III includes all the functions of Piwis II.

Q: How to update V37.250.020 Piwis tester III Software Future?

A: The package comes with Lenovo T440P computer, 240G Solid Hard Disk, Authorization etc. If you want to update, you need to ship back the computer to the dealer, usually, the software updates 1-2 times per year.

Q: Can Piwis Tester II update to Porsche Piwis Tester III V37.250.020?

A: No, they have the different hardware, the Piwis III has the higher demand to the computer resolution.

Q: Can I use my personal computer?

A: No, the computer and the device is bound together. Because The Piwis III V37.250.020 is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will have no nonsense.

Q: Why need Piwis III V37.250.020?

A: Because Piwis II can’t work with the Porsche after the 2017 year. Only Piwis III V37.250.020 can.

Q: Piwis Tester III programs IMMO & Key online?

A: Yes. It Support.

Q: Does Piwis Tester III support Wifi?

A: Usually, the device is offline version and WIFI is disabled so that you don’t need to activate every 15 days.

Q: Can Piwis Tester III connect to the internet?

A: Yes. It is allowed.

More detail about Piwis III For Porsche Piwis Tester 3 Scanner PST3 Interface with Panasonic CF-30 laptop full set just contact us freely.

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com


  • 0

Autel MaxiSYS MS906BT Auto Diagnostic Scanner Update Online

Autel MaxiSYS MS906BT Auto Diagnostic Scanner Update Online

Autel MaxiSYS MS906BT have all the capabilities of the maxisys mini ms905 as far as vehicle coverage and capabilities for codes, live data, actuation tests, adaptations and ECU coding .comparing the new MS906BT to the MS905 and they are similar in size but the MS906BT seems to have improvements such as faster processors, slightly larger screen, twice the battery capacity and better camera.

10.1

MaxiSys MS906BT is the latest addition to the MaxiSys product line of advanced wireless diagnostic devices. The device is based on the Android operating system featured with the best possible coverage of OE-level diagnostics and ECU coding capability. Utilizing the powerful Exynos 5260 6-core processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15), an 8” capacitive HD touch screen, and long-distance wireless communication, the MaxiSys MS906BT efficiently provides comprehensive vehicle diagnostics and analysis.

Autel MaxiSYS MS906BT Language: English or Spanish(can choose one)

Autel MaxiSYS MS906 has the same apperance with MS906BT, but MS906BT has a few advantage than MS906:
1.MS906BT is installed Bluetooth, allowing diagnosis wirelessly.
2.MS906BT’s diagnostic coverage includes premium vehicle brands such as Maserati and Bentley, which would be required for high-end service shops.
3.MS906BT supports oscilloscope and digital inspection camera add-ons which are not supported by MS906.
4.Finally, MS906BT has the capability to perform coding for covered vehicles.

MS906TS is added TPMS function based on MS906BT.

Features
1.Extraordinarily powerful Samsung Exynos Hexa-core processor
2.8.0” 1024×768 LED-backlit glossy Multi-Touch capacitive display with IPS technology for ultra-mobility
3.Internal reliable 32GB SSD for better performance
4.Built-in 8-megapixel rear camera with autofocus and flashlight
5.802.11b/g/n Wi-Fi to access your favorite web resources
6.Unique ergonomic design with rubberized outer protection and a rugged internal housing
7.Built-in rechargeable lithium-polymer battery for up to 14 hours of continuous operation
8.USB, audio and auxiliary ports make it easy to connect accessories
9.Open source Android Operating System for fast boot-up and multitasking
10.Easy and intuitive navigation makes finding what you need simple and fast
11.The most extensive complete system coverage for more than 80 US, Asian and European makes and models
12.Exceptional OE-Level functionality from comprehensive OBDII diagnostics & services to advanced ECU coding
13.Complete capabilities for codes, live data, active test, ECU information, adaptation, matching, coding etc.
14.Smart AutoVIN technology for identifying vehicle easily
15.Automatic system and software updates with real-time push message notifications via internet
16.Instant remote control tech support anytime, anywhere
17.Cloud-based MaxiFix online community provides a vast database of diagnostic and repair tips and proven filed fixes
18.Interactive Data Logging sessions enable direct contact with Autel Technical Support for first-hand troubleshooting of diagnostic bugs and errors
19.One-stop multitasking designed for ideal management of workshop operations to keep all data files, customer info, and vehicle records well organized
20.Enhanced wireless BT connectivity between the display tablet and VCI device allows greater mobility and ease at work
21.Convenient data management system for managing internal program applications and reviewing data


  • 0

Distinction between MaxiSys MS908 and MaxiSys Pro MS908P

Maxisys MS908P scanner would be the fantastic solution for automobile fix retailers and technicians. Autel MaxiSys MS908 pro diagnostic resource help Automatic WiFi updates obtainable in new application releases, extensive automobile protect for additional than eighty car products, together with: United states of america, Asian and European auto can make. Maxisys MS908 scanner can screen live information in exam, graph, analog and electronic gauge for simple data evaluate and examination.

Do you know Difference between Autel MaxiSys MS908 and MaxiSys Professional MS908P scanner.
one.The two Autel MaxiSys MS908 and MaxiSys Professional MS908P scanner are Autel MaxiSys Automobile Analysis Process.
two.Both Autel MaxiSys MS908 and MaxiSys Professional MS908P scanner developed significantly past the initial capabilities of MaxiDAS Ds708.
three.The two CnAutotool Autel MaxiSys MS908 and Autel MaxiSys Professional MS908P scanner are MaxiSys Auto Communication Interface(VCI) coupled with the best possible protection of OE-level diagnostics.
four.Each Autel MaxiSys MS908 and Autel MaxiSys Pro MS908P scanner run on Android Operating Method.
https://www.autonumen.com/goods-5229-Autel+Maxisys+Elite+with+J2534+ECU+Programming.html


  • 0

Why choose Nexiq USB-link 125032 Diesel Truck Diagnose

Nexiq 125032 usb link is Diesel Truck diagnostic Interface. Nexiq truck scanner can compatible with 17 software. Below auto diagnostic obd sharing Tips of Nexiq wireless adapter Nexiq 125032 usb link update. Many individuals will probably be interested that will how come NEXIQ 125032 a favourite. Tend not to twice that. You will enjoy the response following browse the major perform regarding NEXIQ 125032 USB Big rig the facts application.

Warm selling NEXIQ 125032  USB Big rig the facts application automobile research assets in this company, considering that the specialist obd2 application Automobile research unit service provider. We intend to genuinely present our personal OBDII things match your needs, and also as a result of different consumers give the many sage suggestions. I know it’s the very best certainly one of Pickup trucks as well as Durable Check out Equipment. 1st, this may reveal our concerns, it could more quickly hook up vehicle’s the facts plug, and i also could possibly get car info regarding upkeep or perhaps supervision studies. NEXIQ not merely are able to do detect machines, diffusion, AB MUSCLES, tool solar panels, extensive standard protocol plus more. Following are Why choose Nexiq USB-link 125032 Diesel Truck Diagnose:

firstly. Nexiq USB-link 125032 is Diesel Truck Diagnostic Interface. USB NEXIQ 125032 can reduce reprogramming times with direct USB connection. NEXIQ 125032 USB Link is compatible with multiple software applications.
Secondly. NEXIQ 125032 truck diagnostic tool have a USB Link with Software Diesel Truck Interface.
Thirdly. Nexiq interface software with All Installers is a PC-to-vehicle interface compatible with multiple software applications, minimizing your investment in multiple brand-specific diagnostic.
Fourthly. NEXIQ adapter can be diagnose transmissions, ABS, engines, instrument panels and more.
Lastly. Nexiq USB Link 125032 Heavy Duty Vehicle Interface is a functional truck diagnostic tool will satisfy all truck and heavy duty owner. Do not miss it.


  • 0

Autel MaxiSYS Pro MS908P register, install and update

The Autel MaxiSYS Pro is the most comprehensive OBD2 tool for the professional technician who performs J-2534 reprogramming on a regular basis. The WIFI Autel MaxiSys Pro MS908P supports diagnostic and programming functions for multi-brand vehicle systems. Following are the software register, install and update instruction.
25.1
How to install Autel MaxiSYS Pro MS908P software?
There are two Setup.exe program packages contained in the CD provided with the MaxiSys tool kit. The packages include the following applications:
1. PC Link – launches a Printing Services program which receives and
allows editing the files sent from the MaxiSys tablet for printing
2. Driver Program – setup driver program for the VCI device
3. Network Configuration Program and Update Agent – network configuration program and firmware update agent for the VCI device (for J2534 ECU programming device)
4. Update Agent – firmware update agent for the VCI device (for Bluetooth communication interface)
To install the Setup.exe program
1. Insert the CD into the CD-ROM of the computer. The driver installation wizard will load momentarily.
2. Click on Next on the welcome page.
3. Click the Change button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.
4. Click Install and the Setup.exe program will be installed onto the computer.
How to register Autel MaxiSYS MS908P pro programmer?
In order to get access to the Support platform and obtain update and other services from Autel, you are required to register the MaxiSys Diagnostic Device the first time you use it.
To register the diagnostic device
1. Visit the website: http://pro.auteltech.com.
2. On the Sign In page, input your account ID and other information to log in, if you already have an account.
3. If you are a new member to Autel and do not have an account yet, click the Create Autel ID button on the left side.
4. Enter the required information in the input fields, read through Autel’s Terms and Conditions and tick on Agree, and then click Create Autel ID at the bottom to continue.
5. The online system will automatically send a confirmation email to the registered email address. Validate your account by clicking the link provided through the mail. A product registration screen opens.
6. Find out the device’s serial number and password from the About section of the Settings application on the MaxiSys Display Tablet.
7. Select the product model of your device, enter the product serial number and password on the Product Registration screen, and click Submit to complete the registration procedure.
How to Autel MaxiSYS Pro MS908P diagnostic scanner?
1) To update the software
Each car model software has different version. We provide free update online for One Year, after one year update fee is 995USD/year
2) To update the firmware
The internal programming of the MaxiSys Diagnostic System, known as the firmware, can be updated using the Update application. Firmware updates increase the MaxiSys applications’ capabilities, typically by adding new tests, new models, or enhanced applications to the database. The display device automatically searches for available updates for all of the Maxisys components when it is connected to the internet. Any updates that are found can be downloaded and installed on the device.
1. Power up the MaxiSys Display Tablet, and ensure that it is connected to a power source and with steady internet connection.
2. Tap the Update application button from the MaxiSys Job Menu; or tap the update notification message when received one. The Update application screen displays.
3. Check all available updates:  If you decide to update all the items, tap the Update All button. If you only want to update some individual items, tap the Update button on the right column of the specific item.
4. Tap the Pause button to suspend the updating process. When you tap Continue to renew the update, the updating process will resume from the break point.
5. When the updating process is completed, the firmware will be installed automatically. The new version will replace the original version if there is one.