Monthly Archives: November 2019

  • November 25, 2019
  • 0

OBDSTAR X300 DP/ X300 DP PLUS 2018.8 Upgrade Announcement

Tags :

Category : Car Diagnostic Tool

OBDSTAR X300 DP/ X300 DP PLUS 2018.8 Upgrade Announcement:

IMMO:

FORD

Optimized the 2013 Ford Explorer pin code verification to be twice

Toyota/Lexus

Optimized the Toyota type 5 smart key (all keys lost) operation tips

VW/Audi/Skoda/Seat

Increased automatically skip function

Increased 23C32/24C64 off line all keys lost function

Increased Magotan/CC data reading from Shushi ECU

Increased BCM/BFM remote programming related function

Increased 46 chip key programming and unlock key function

Optimized 48 chip key programming function

Upgraded the function of automatically recognize dashboard type

Hyundai

Optimized new Tucson smart key programming operation tips

Optimized remote programming type 1(put the process of turn off ignition and pull out the key before enter the system to improve the communication coherence)

KIA

Optimized smart key system type 4 and type 6 operation tips

Peugeot/Citroen/DS

Solved Peugeot 307 all keys lost pin code reading failure

GM

Optimized Buick Excelle 2013-IMMO system type1

Increased Buick Excelle 2013-IMMO system type2(add key/all keys lost/key quantity)Optimized the problem of sending the wrong pin code when reading pin code via BCM

If receive negative response “02 1A 90” when reading pin code via BCM system, continue scan the second pin code reading method

Nissan/Infiniti

Increased remote programming type 2

Optimized remote programming type 1

Optimized 2017-Qijun smart key programming

Lufeng

Optimized Lufeng X7 2017-smart key system operation tips

Rongwei/MG

Optimized Rongwei 950(2012-) pin code reading

Mitsubishi

Optimized software(display the function menu before entering the system)

Increased Pajero/Jinchang/L200 TRITON 2017- smart key system(key programming/key quantity)

Renault/Dacia/Lada

Increased Fluence pin code calculating method

Revised the wrong judgement for Fluence pin code calculate method

Optimized the judgement for Dacia DOKKER key programming process

Jianghuai

Optimized 2017 Ruifeng S2 communication fault in remote programming

Optimized the function menu add key/erase key to be add remote/erase remote

Display menu before entering the system

Chrysler

Increased Chrysler 300/300C 2014- smart key system (add key/erase key)

Increased Dodge CHARGER 2014- smart key system (add key/erase key)

Increased Jeep CHEROKEE -2014 IMMO system (add key/erase key/pin code reading)

Increased Dodge CHALLENGER 2014- smart key system (add key/erase key/key quantity/pin code reading)

Increased Dodge DURANGO 2014- smart key system (add key/erase key)

Increased Dodge MAGNUM 2011- smart key system (add key/erase key/key quantity/pin code reading)

Increased Dodge RAM PICK UP 2002-2005 IMMO system (add key/erase key)

Optimized 2006 Jeep Commander

Optimized the menu with model and type classification

Geely/Maple/Englon

Geely

Increased Vision Shanghai Industrial pin code reading

Increased new Cruiser Shanghai HG car body system

Emgrand

Increased EC820/EC825/EX8 Shanghai Industrial pin code reading

Increased new Emgrand Shiye Jiaotong IMMO system

Increased new Emgrand Continental smart key system

GLEAGLE

Increased GX725 Shiye Jiaotong IMMO system

Increased GX718/GX725 Nunn smart key system

Increased GX718/GX725 Continental car body control system

Increased GC7/GX2/GX718/GX720/GX725/GX9/Panda Shanghai Industrial pin code reading

Maple

Increased Shanghai Industrial pin code reading

Englon

Increased SX718 Lear car body control system
Increased SX718/SX720/SX725 Nunn key system

Increased SX720/SX725 Continental car body control system

Increased SC3/SC7/new Seaview Shanghai HG car body system

Increased C5/SX718/SX720/SX725/new CROSS/new CROSS hatchback/new CROSS saloon Shiye Jiangtong IMMO system

Increased C5/ SC5/SC6/SC7/SX718/SX720/SX725/CROSS/new CROSS/new CROSS hatchback/new CROSS saloon Shanghai Industrial pin code reading

Cluster Calibration

FORD

Optimized Explorer 2015- dashboard Initialization to be multi-ways scan

GM

Optimized 2016 Chevrolet Tahoe safety calculating

VW

Increased VW type: NEC+24C08

Upgraded automatically recognize function

Oil/Service Reset

Solved Changan CS15 oil/service reset failure

Increased the second manual reset in some Jeep models

TPS

New Increased:

Hafei

Hafei Zhongyi/Hafei Baili/Hafei Saima/Hafei Lubao/Hafei Minyi/Hafei Ruiyi/Hafei Songhuajiang/Hafei Saibao/Hafei 8/Hafei 9/Hafei 10/Hafei Junyi

Mazda

(ALL MY05) Escape/Tribute/Maverick/Mariner
Escape/Tribute/Maverick
Ranger/Mazda B-Series/Courier
MAZDA6(Middle East/General)
MAZDA6(North America/General)
Escape/Tribute/Mariner

Chrysler

HG-Aspen/CS-Pacifica/PM-Caliber/VF-ProMaster

VM-ProMaster City/PD-Neon/JF-Freemont/PT-PT Cruiser

Ford
Escape/Tribute/Maverick/Mariner/Blue Bird C-Class Vision/B-Max/C-MAX/
EcoSport/Edge/Escape/Mariner Hybrid/Escape/Tribute/Mariner/Escape/Kuga/
Expedition EL/Fiesta/Ikon/Fiesta 3-door/Fiesta MY2013/Five Hundred(MY05)/

Montego(MY05)/Flex/Focus Cabriolet/Focus VIN = LFA/LVS/AFA/PE1/FFJ/
Fresestyle/Fusion/Galaxy/S-Max/Kuga/Kuga/Escape/Mariner/Mark LT/Milan/MKC/

MKS/MKT/MKX/MKZ/Montego/Navigator L/NOVO KA/Ranger/Mazda B-Series/Troller/
S.A.Courier/Street Ka/Taurus X/Territory/Transit Connect/Transit/Courier/Zephyr/MKZ

Steering Angle Learning

Increased FAW Hongqi H7 steel angle reset function

Increased Geely EC715/EC718 steel angle SAS function

Increased Jaguar F-Pace(2017-)/XE/XF(2016-) Steering column correction function

Increased Rongwei RX3/RX5/eRX5/i6/ei6/360/ new 550 hybrid steel angle reset function

Increased Changcheng C30EV/CH041E/Hover H4/Hover M6/VV5/VV7/P8/C50 steel angle reset function

Increased Land Rover Discovery 4(2010-2012)/Discovery 4(2014-)/Rande Rover(2013-2015)/Rande Rover(2016-)/Rande Rover Sport(2012-2013)/Rande Rover Sport(2014-2015)/Rande Rover Sport(2016-) Steering column correction function

Increased Land Rover Discovery Sport(2015-)/Rande Rover(2013-2015)/Rande Rover Sport(2014-2015)/Rande Rover Evoque(2014-) power steering soft lock stop position reset routine program function

New Increased:

Jaguar: XJ/XE/F-PaceLand Rover: DISCOVERY SPORT/DEFENDER

Chr

ysler:

PACIFICA/SEBRINGAVENGER/ASPEN/CALIBER/CHALLENGER

COMMANDER/COMPASS/DAKOTA/DODGE RAM/DURANGO/ FREEMONT/JOURNEY/LIBERTY/NEON/NITRO/PROMASTER/

PROMASTER CITY/RAIDER/RAM(MEXICO)/RAM 1500/RAM 2500/RAM 3500 CAB CHASSIS/RAM 3500 PICHUP/RAM 4500/RAM 5500/ RENEGADE/ROUTAN/TOWN & COUNTRY/CARAVAN/VOYAGER/VIPER/ WRANGLER/WRANGLER(EXPORT)

Jeep/Dodge:

300/GRAND CHEROKEE/MAGNUM/CHARGER/200/ CHEROKEE/DART/PACIFICA/SEBRINGAVENGER/ASPEN/CALIBER/ CHALLENGER/COMMANDER/COMPASS/DAKOTA/DODGE RAM

DURANGO/FREEMONT/JOURNEY/LIBERTY/NEON/NITRO/PROMASTER/PROMASTER CITY/RAIDER/RAM(MEXICO)/RAM 1500/RAM 2500/RAM 3500 CAB CHASSIS/RAM 3500 PICHUP/RAM 4500/RAM 5500/ RENEGADE/ROUTAN/TOWN & COUNTRY/CARAVAN/VOYAGER/VIPER/ WRANGLER/WRANGLER(EXPORT)

Beijing Hyundai:

New Elantra(ID)/Elantra Electric(HDC EV)/New Verna(CB)/Verna(YC)/Elantra (ADC)/New Tucson(TLC)/Sonata(LFC)/Mistra(CF)/Sonata(NFC)/Elantra (HDC)/New Santafe (DMC)/New Sonata(NF)/Sonata(YFC)/Avante (MDC)(GC)/ix35(LMC)/i30(FDC)/SONATA Hybrid(LFC HEV)；

Dongfeng Yueda Kia:

K2(UC)/K3(YDC)/KX3(KC)/K4(PFC)/K5(TFC)/K5(JFC)/KX5(QLC)/K5 HEV(JFC HEV)/LQE(EV)/Sportage(SLC)/Forte(TDC)；

Hyundai (Europe): 

Accent(HC)/Accent(RB)/Accent/Solaris(HCR)/Accent/Solaris(RBr)/

Creta(GS)/Creta(GSB)/Creta(GSR)/Elant(AD)/Elant(ADA)/Elant(ADI)/Elant(HD)/Elant(MD)/Elant(MDI)/Elant(UD)/Elant Coupe(JK)/Yakos / Century(VI)/G80(DH)/G90(HI)/Genesis (BH)/Genesis (BH)-U.S./Jieensi(DH)/Genesis Coupe(BK)/Genesis Coupe(BK)-U.S./Gage(TB)/Null/Azera(HG)/Null/Azera(IG)/Null/Azera(TG)/Grand i10/Xcent(BA)/Grand santafe(NC)/H-1/iMax/iLoad(TQ)/H-100 truck (HR)/HB20(HB)/i10(IA)/i20(GB)/i20(IB)/i20(PB)/i30(FDE)/i30(GD)/i30(GDE)/i30(PD)/i30(PDE)/i30/Elant Neos(FD)/i40(VF)/IONIQ electric(AE EV)/IONIQ hybrid(AE HEV)/IONIQ PHEV(AE PHEV)/ix20(JC)/ix35(EL)/ix35 Fuel battery electric vehicle

(LM FCEV)/Santafe(CM)/Santafe(DM) /Santafe(DMI)/New Santafe Sports(DMA)/Sonata(LF)/Sonata(LFA)/Sonata(NF)/Sonata(YFA)-U.S./Sonata(YFI)/Sonata/i45(YF)/Sonata Hybrid(LF HEV)/Sonata Hybrid(LF HEV)-America Version/Sonata Hybrid(YF HEV)/Sonata Hybrid(YF HEV)-U.S./Tucson(LM)-Brazil/Tucson(TL)/Tucson(TLE)/Tucson(TLI)/Tucson/ix35(LM)/Veloster(FS)/Verna(RBI)

New Increased Models:
Jaguar: F-TYPE/XF；

Land Rover:

Discovery/RANGE ROVER/RANGE ROVER SPORT/RANGE ROVER EVOQUE/FREELANDER

Chrysler: 300/GRAND CHEROKEE/MAGNUM/CHARGER/200/ CHEROKEE/DART

Optimization      

Increased Land Rover Steering column correction function

And steering column code edit function

Optimized Land Rover mode 1 and mode 2

BMW Programming Software

Increased 6HP Gearbox reset function

APK Software

Erased the self-design menu button
Modified the data record storage logic
Optimized the car list display program

  • November 25, 2019
  • 0

Porsche Piwis Tester II Diagnostic Tool -Next Generation of PIWIS Tester KTS520

Tags :

Category : Professional Diagnostic Tools

Automotive Digital Diagnostic Tools Porsche Piwis Tester II is the latest inspect equipment of Porsche Company. This is the latest professional tester for Porshe, it is the Next Generation of PIWIS Tester KTS520. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars.

Lastest Version for Porsche Piwis Tester 2 is V16.20.This is Original Porsche Software , you can free to download from official website.

Porsche Piwis Tester II works with the old and latest Porsche cars from 2005-2015. It is equipped with the CF30 laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.

Porsche Piwis Tester II Support Systems: Engine, automatic transmission, air-conditioning, SRS, ABS, ASR, MPL, GM, Original antitheft System, Keyless GO system, OBDII system.

The Functions of Porsche Piwis Tester II including:
Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.

Compare with PIWIS Tester KTS520, Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

Porsche Piwis Tester II is compatible to work with CF30 laptop. CF-30 is a Second Hand laptop which in good condition. If you order this item from www.autonumen.com , Software is inside the Hard Drive. Our engineer will test it well for send out the package to you. You can get it to work directly when you receive the package, No need Installation.

Promotion Price for Porsche Piwis Tester V16.20 with CF30 Laptop is 738USD.

If you are interesting in buy this tool, please check this link to place an order:https://www.autonumen.com/goods-4738-Porsche+Piwis+Tester+II+with+CF30+Laptop+or+Lenovo+E49AL+Laptop.html

  • November 25, 2019
  • 0

John Deere Service Advisor with Nexiq clone 90% Worked

Tags :

Category : Professional Diagnostic Tools

FYI, John Deere Service Advisor 90% works with Nexiq China clone.

Topic 1: John deere SA possible with NEXIQ USB Link?

It is possible to install Professional Diagnostic Tools John Deere Service Advisor on your laptop, though the installation is really complicated. If you have a Lenovo Thinkpad laptop, the easiest way is to restore the main partition from the image of my computers’ c: drive. And every time i change my laptop, i just restore it.

Win7 installed and fully updated. It takes hours.

The image will not work on XP, but SA works fine. My suggestion, buy used Lenovo T400 or T500. it’s more or less 250 EURO in Europe. Install windows 7 and then can put my image. Takes 10 minutes and u have SA working.

Topic 2: How to get Nexiq china worked?
I spent a month doing research on this and i managed my Heavy Duty Truck
Scan Tool Nexiq to work 90%. The thing is that Nexiq has only 2
channels while EDL has 3. The 3rd one is Powertrain and it is used very
seldom. E.g. I reprogrammed all the controllers on 6690 premium except
two, but found a way around it opening the pld file with pld editor and
changing Powertrain channel to Vehicle (channel 1). Lots of machines
don’t even have a 3rd Powetrain channel. Like all 5R; 6115R, 6125R,
7280R….. From my experience only the older machines have it and still
can be programmed most of the time. Programming controllers is easy, but
diagnostics is a bit annoying. Every time you establish the connection u
have to remove the USB plug and plug it again for the readings to
appear. Connection establishment is taking a long long time and you
never see the ECU. Only all the other controllers. So all the time
something doesn’t work. If you are prepared for this here is what you
have to do:

a) Rewire the the cables as shown in the picture in my post here:
I switched places channel 1 with channel 2 (see the pic) with my Chinese
version and now it works fine, probably it was possible to do it
adjusting the software settings as mentioned above, but i tried a lot,
and nothing helped. Now i can connect, tried with 6125R and 5070M. Works
fine!!! Except one very important thingy. After i establish the
connection, all the reading give the same meaningless number. Then, I
discovered accidentally, I pull out the USB cable, get the message
“Connection interrupted” I put it back in, get the message “Connection
resumed” and wuolla, all the readings show up immediately.

b) You don’t have to change the firmware. Both will work pretty much the same but with different issues.

P.S. For diagnostics only, there is a subprogram of SA that works
without any cable rewiring, it doesn’t have a Program Controller option,
and you still need to reinsert the usb after connection has been
established. You just need to select the right port (which is usually
1939ImplementAutoboud or 1939AppAutoboud depending on the machine) and
model. If you have SA, you will find the software at c:\Program
Files\Service ADVISOR\xvds\XJDET.exe

Just to let you know, after a year working like that, i bought
another EDL (recommended by a folk in the forum, much much much more
than the old one)
So much relief

  • November 25, 2019
  • 0

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop

Tags :

Category : Heavy Duty Diagnostic

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop （Real Caterpillar ET3 Adapter III）

we will install the software before ship, so you can get it work directly after you receive it.
2017A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2017A Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.

Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

CAT ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)

Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory Professional Diagnostic Tool CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.

2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.

  • November 25, 2019
  • 0

MB SD Connect 5 vs 2017 FVDI2 Commander

Tags :

Category : MB Star

Both MB SD C5 and FVDI II are diagnostic and Programmer tools for Mercedes Benz Cars & Trucks.Then buy Mercedes Benz MB SD C5 or buy FVDI 2 Commander ,which better ? Referred to this question, here,the blog will make a comparison between these two tools,hope it will give you more informations.

About WiFi MB SD Compact 5

Newly MB SD C5 was updated from C4,compared to C4,the new SD Connect C5 with new design and better function and performance. And Car Diagnostic Tools MB SD Connect 5 is specially for Mercedes Benz Cars & Trucks after year 2000.

About 2017 FVDI2 Commander Diagnostic Tool

The 2017 FVDI2 Commander Diagnostic is a professional tool for fully programming your vehiles,see official features below

1. Read identification
2. Read extended identification
3. Read/Clear fault codes
4. Scanning for control units / Clearing fault codes in all control units
5. Display of Actual Values
6. Actuator Tests
7. Reset of control units
8. Control unit adaptations
9. Adjustment of injector injection quantities adaptation for Diesel Engines (CDI-4, CDI-5).

MB SD Connect 5 vs FVDI2 Commander

1.MB SD Connect 5 supports more Languages than FVDI II.

2.MB SD C5 Supports wireless diagnose,while the FVDI 2 didnt.

3.MB SD Connect C5 supports Mercedes Benz Cars After Year 2000,while the FVDI 2 can support Mercedes Benz Smart Maybach.

4. FVDI II Diagnostic Tool comes with a USB Dongle,the MB SD didnt.

5 FVDI II is a professional tool to programmer your vehicles from everysides like Airbag,Programming transponder keys ,Read/Write EEPROM of Dashboard control units and so on.

6. FVDI II Diagnosis can work on more window system than MD Connect C5.

7. 2017 FVDI II is expensive than MD SD C5.

So,if you are looking for a professional tool ,then buy FDVI II,though the price is expensive,yet,the function is powerful.But if you just wanna a tool to programming or flashing your Mercedes Benz,then buy MB SD Compact C5,currently,it is super hot and big welcomed.

See more click:http://www.autonumen.com/

  • November 18, 2019
  • 0

Benz C6 DOIP Xentry Diagnosis FAQ:

Tags :

Category : MB Star

Benz C6 DOIP Xentry Diagnosis FAQ:

Q: Can Mercedes Benz C6 works stably? Is its quality good or not? Comparing with MB SD C4, it supports DoIP, what are more differences? Can it run faster than C4?
A: Benz C6 quality is good without problem.

Comparing C4, it has different hardware; it supports DoIP protocol and it can’t work with old Mercedes while sdc4 can support old Benz models if running fine with the old software.

The running speed depends on the computer configuration, the engineers are already tested C6 and C4 have almost the same running speed on a same computer.

Q: Is the C6 software is activated before delivery?
A: The software comes with Keygen so the users can activate by themselves. Because it is bound with a computer, if the supplier help active before delivery then the user has to active again after receiving.

Q: Does Benz C6 come with SCN coding function? or the user has to pay it?
A: It supports online SCN coding only when the user has online account.

Q: Can Benz C6 DOIP work with trucks?
A: yes, it works with trucks.

Q: Whether the window10 can be installed.
A: The software is preinstalled by allscanner Company, with win7 64bit.

Q: Whether the Korean language is supported when installing software is installed.
A: Yes, it has Korean language, besides more popular languages.

Q: The manual says that only one computer can be installed, but if I want to use it on two laptops, can I buy it from the Internet?
A: Like C4, it is hard disk version, it allows you to use on two laptops but needs to active by yourself with the built-in keygen.

Q: How to update when a program is updated.
A: To pay the newest software to update.

Q: I would like to know whether the coding method and usage method are on video or not
A: It has the same usage method as MB STAR C4.

  • November 18, 2019
  • 0

John Deere Service Advisor with Nexiq clone 90% Worked

Tags :

Category : Professional Diagnostic Tools

FYI, John Deere Service Advisor 90% works with Nexiq China clone.

Topic 1: John deere SA possible with NEXIQ USB Link?

It is possible to install Professional Diagnostic Tools John Deere Service Advisor on your laptop, though the installation is really complicated. If you have a Lenovo Thinkpad laptop, the easiest way is to restore the main partition from the image of my computers’ c: drive. And every time i change my laptop, i just restore it.

Win7 installed and fully updated. It takes hours.

The image will not work on XP, but SA works fine. My suggestion, buy used Lenovo T400 or T500. it’s more or less 250 EURO in Europe. Install windows 7 and then can put my image. Takes 10 minutes and u have SA working.

Topic 2: How to get Nexiq china worked?
I spent a month doing research on this and i managed my Heavy Duty Truck
Scan Tool Nexiq to work 90%. The thing is that Nexiq has only 2
channels while EDL has 3. The 3rd one is Powertrain and it is used very
seldom. E.g. I reprogrammed all the controllers on 6690 premium except
two, but found a way around it opening the pld file with pld editor and
changing Powertrain channel to Vehicle (channel 1). Lots of machines
don’t even have a 3rd Powetrain channel. Like all 5R; 6115R, 6125R,
7280R….. From my experience only the older machines have it and still
can be programmed most of the time. Programming controllers is easy, but
diagnostics is a bit annoying. Every time you establish the connection u
have to remove the USB plug and plug it again for the readings to
appear. Connection establishment is taking a long long time and you
never see the ECU. Only all the other controllers. So all the time
something doesn’t work. If you are prepared for this here is what you
have to do:

a) Rewire the the cables as shown in the picture in my post here:
I switched places channel 1 with channel 2 (see the pic) with my Chinese
version and now it works fine, probably it was possible to do it
adjusting the software settings as mentioned above, but i tried a lot,
and nothing helped. Now i can connect, tried with 6125R and 5070M. Works
fine!!! Except one very important thingy. After i establish the
connection, all the reading give the same meaningless number. Then, I
discovered accidentally, I pull out the USB cable, get the message
“Connection interrupted” I put it back in, get the message “Connection
resumed” and wuolla, all the readings show up immediately.

b) You don’t have to change the firmware. Both will work pretty much the same but with different issues.

P.S. For diagnostics only, there is a subprogram of SA that works
without any cable rewiring, it doesn’t have a Program Controller option,
and you still need to reinsert the usb after connection has been
established. You just need to select the right port (which is usually
1939ImplementAutoboud or 1939AppAutoboud depending on the machine) and
model. If you have SA, you will find the software at c:\Program
Files\Service ADVISOR\xvds\XJDET.exe

Just to let you know, after a year working like that, i bought
another EDL (recommended by a folk in the forum, much much much more
than the old one)
So much relief

  • November 18, 2019
  • 0

How to Using BMW ICOM A2+b+c to program BMW F-Series chassis models

Tags :

Category : BMW ICOM

Using BMW ICOM A2+b+c to program BMW F-Series chassis models

* Programming Control Unit

* Set Code Control unit

Control unit measures can be selected as follows:

* Click on the control unit under the tab “Control Unit Tree”

* Under the “TAB Edit Control unit”, either by direct selection or by clicking on the control unit.

Menu “Programming”

To execute the vehicle programming/setting code, do the following:

* Use ista/p to read vehicle data.

After you create a new dialog, display the tips for “dialog preparation”

* Follow the tips, record when necessary, confirm button “OK”

Show the dialog box “whether the control unit has been replaced”

* Confirm button “No”, exceptions see “replace (update) control unit”

Establish a connection with the vehicle:

The vehicle details are displayed after the specified associated environment has been successfully identified. Displayed under Menu “Programming”.

1 Menu “Programming”

2 Integration Level (actual), showing the vehicle’s current integration level

3 Open code status, used in vehicles or necessary opening code status

4 progress bar, showing the process of determining the action plan

5 final processing, showing ProgMan or ista/p version, through which the vehicle is finally processed.

6 Integration Level (factory), showing the integration level of vehicle production

7 Tab “Vehicle Details”

Tip: If there is no action for the specified associated environment, the button “Confirm Action plan” is not activated.

tab “Control Unit Tree”:

The control unit tree according to the topological structure, the image displays the control unit which the vehicle installs. Each control unit is displayed with the corresponding bus connection. The combined control unit is displayed in a light blue area.

1 Menu “Programming” 2 Tab “control Unit Tree”

3 Button “Choose the total set code”,

Vehicle Total Setting Code selected

4 Button “Cancel action”, the measures determined in the associated environment are deleted

Tip: You can directly perform measures that are not affected by the integration level (such as hard drive upgrades) without writing to the integration level.  “Cancel action” on this confirmation button. Delete all measures determined by the associated environment. Integrated level-related control unit measures may not be selected manually.

tab “Edit Control Unit”:

1 tab “Plan processing”

2 programming, programming the control unit

3 Code, set code for control unit

4 replacement, replacement (update) control unit

5 replacement post-processing, subsequent processing of replaced (updated) control units

The measures available to the control unit are different. Depending on what measures are defined, the control unit may vary.

Select the control unit and the screenshot after the” tabs action” list:

1 Tab “Action list”

2 Icon “Measure failed”

3 icon “Action Missing Prerequisites” 4 Icon “Warning”

5 icon “measure Success” 6 Icon “measures in progress”

7 Icon “Planned software measures” (for example, set code)

8 icon “Planned hardware measures”

Select the tab “action list” to display planned measures that include the appropriate status.

Select the control unit,  the screenshot after the TAB “control unit Information”:

1 Menu “Programming”

2 Tab “Action list”

3 button “Determine Action plan”

The “action list” is a summary of the form of the planned action table. These measures are also shown in the “Action plan”. Also displays hints about the control unit (for example, the control unit is not programmable).

Menu “Vehicle”:

By switching to the menu “vehicle” You can add the following measures to the plan:

* Modification and retrofitting, see “refitting and retrofitting”

* Vehicle operation (HDD upgrade, see “Upgrading Navigation System Map data”).

xt-transform:none;font-style:normal;font-size:9.5000pt;mso-font-kerning:0.0000pt;background:rgb(255,255,255);mso-shading:rgb(255,255,255);” > after the TAB “control unit Information”:

1 tab “Refit” to show available modifications and retrofitting

2 Tab “Vehicle operation”:

* Upgrade navigation system map data (HDD upgrades)

* Input Vehicle Task

* Select the total set code

3 Menu “Vehicle”

To select other measures (programming, setting code), switch back to menu “programming”.

:none;font-style:normal;font-size:9.5000pt;mso-font-kerning:0.0000pt;background:rgb(255,255,255);mso-shading:rgb(255,255,255);” >* Modification and retrofitting, see “refitting and retrofitting”

* Vehicle operation (HDD upgrade, see “Upgrading Navigation System Map data”).

xt-transform:none;font-style:normal;font-size:9.5000pt;mso-font-kerning:0.0000pt;background:rgb(255,255,255);mso-shading:rgb(255,255,255);” > after the TAB “control unit Information”

  • November 18, 2019
  • 0

MB SD Connect C5 is Verified Working Great

Tags :

Category : MB Star

The new Mercedes Benz diagnostic tool MB SD Connect C5 is
verified working great. Here are customer feedback to Benz C5
SD Connect (not original Xentry Connect C5).

1.
“Mercedes Sprinter year 2006 and 2014 works, both the
diagnosis
All the personal cars also works, no problem”
2.
“All the trucks including euro6 also works, no problem.
Bus Mercedes Tourismo euro5 year 2010-2012 test works, BUT
year 2014 euro6 does NOT work, it says that the license is
invalid. Both sd c4 and sd c5, we have tested both on the same
cars, to be sure.”
3.
SD Connect C5 this one customer has test, works good, in
function it no difference with SD C4, but performance it is
better. So you can buy MB SD C5 if you want buy new MUX. SD C5
use the same software as MB SD Connect C4.

“I have used V2016.12 software. I am ready to order the new 2017.05V software. It is said that the 2017.05 DAS/Xentry has improved a lot. New software in SSD runs faster and much more steable on Windows 7 or Windows 8 instead of Windows XP system. Also, new WIS and EPC parts catalog offers more full information for more models.
Well, my friend with 2016.12 version saying earlier Daimler AG needs the user name and password to login, but in this version, no need that.”

  • November 18, 2019
  • 0

Xtool X100 PAD 2 Program Keys for VW 4th 5th IMMO

Tags :

Category : Car Diagnostic Tool

The new Xtool X100 PAD2 diagnostic tablet add Xhorse VVDI VAG funxtion:VW 4th & 5th IMMO programming keys,program remote and read pin code for Audi,VW,Skoda,Seat cars

Xhorse VVDI VAG is good tool as we know,but its price is also very high and it programs VW 4th & 5th IMMO via 5th immo update tool only

while our Xtool X100 PAD2 price is much lower and for vw 4th & 5th immo programming,we add 4th & 5th immo sepecially

Besides X-100 PAD 2 have more Features:

Key Programming
Oil Reset/Engine oil light reset
Odometer Adjustment
Tire Pressure Warning Light Reset
Timing belt light reset (Manual Operation)
EPB Electrical Parking Brake Adaptation
TPS Throttle Body Adaptation
Steering Angle Calibration
Battery Reset
DPF PIN Code Reading
Hexadcimal editor(Win Hex)
OBDII Diagnosis
Support the latest vehicles with CAN BUS and UDS protocol
Update Via WIFI (always equip your device with the latest software)

Next Page »

OBD2 Diagnostic Tool Links

OBD2 Scanner
Auto Diagnostic Tools
OBD2 Diagnostic Tools
Car Diagnostic Tools
Auto Scanner Tools
Autocom CDP
Auto key Programmer
Launch X431
Launch CRP123
CK100
BMW ICOM
VCS Auto Diagnostic Tool
ELM Family
Autoboss Tools
Autel Scanner
Heavy Duty Diagnostic Tools
VAG COM
Mileage Correction
MB Star C3
MB Star C4
autotool.us

Recent Posts

Archives

Categories

Pages