Monthly Archives: July 2019

  • 0

John Deere Diagnostic Kit Service Advisor Electronic Data Link EDL V2

John Deere Diagnostic Kit Service Advisor Electronic Data Link EDL V2

John Deere Diagnostic Kit allows user to perform diagnostic for service of agricultural, construction equipment John Deere and engines.

Electronic Data Link (EDL) is the dealer diagnostic PC-to-vehicle interface compatible with Service ADVISOR software. With Service ADVISOR you can view service manuals, use DTAC (Technical Assistance Center) data, make diagnostics, readings, tests and calibrations, re-program controllers.

Support Languages: English, French, German, Italian, Portuguese, Russian, Spanish.

John Deere Service Advisor Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.

John Deere AG Management Solutions, Attachments, Backhoes, Combines and Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages, MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers, Sprayers, Sugar Cane Harvesters, Tillages, Tractors, Worksite Pro Attachments.

John Deere Service Advisor CF (Construction and Forestry), workshop service manual, repair manual, diagnostic, electrical wiring diagram, hydraulic diagram John Deere.
John Deere Service Advisor CCE (Commercial and Consumer Equipment)dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools, assemble and disassemble presented all models John Deere Construction Equipment and some models Hitachi, Euclid, Bell and Timberjack.

JOHN DEERE diagnostic adapter for construction equipment, agriculture, engines John Deere.


  • 0

Launch X431 PRO MINI Product Introduction

Launch X431 Pro Mini is a stylish Android-based vehicle trouble diagnostic tool. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Through the simple Bluetooth communication between the VCI module and X-431 PRO MINI, it achieves full car model and full system vehicle trouble diagnosis, which includes Reading DTCs, Clearing DTCs, Reading Data Stream,Actuation Test and Special Functions.
Moreover,it supports Wi-Fi connection, which enables you surf the Internet,update the diagnostic software online and perform remote diagnosis etc, getting your job fixed faster and easier.

Launch X431 Pro Mini Features
1. Diagnostic Tool:
A. Diagnose
*Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. Diagnosis functions include: Read DTCs, Clear DTCs, Read data stream, Special functions etc.
*Specially designed for Android platform with clear and user-friendly interface.
*Via Bluetooth, it is simple for the VCI module to communicate with X-431 PRO MINI.
*Equipped with an exclusive X-431 PRO MINI protective sleeve to prevent it from being damaged.
B. One-click Update: lets you update your diagnostic software more efficiently.
C. Repair Data: provides abundant automotive handbook, repair case and wiring diagrams for reference and retrieval.
D. Remote Diagnosis: configures X-431 PRO MINI as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.
2. Browser: built-in Wi-Fi module makes surfing on the internet freely.
3. Email: allows you to send and receive emails.LAUNCH X-431 PRO MINI User Manual
4. Settings: to configure your personalized X-431 PRO MINI through it.
5. Applications: other android based applications can be customized to install or uninstall.

If you want more information about Launch X431 Pro Mini , please visit our website www.autonumen.com


  • 0

How to Choose good SD C4 Star Diagnosis SDConnect MB Star C4

MHHAuto MB Star C4 Mercedes Benz Star Diagnosis SD Connect C4 Experience Sharing

There are so many kinds MB Star C4 SD Connect Multiplexer in the market, how to choose a good Star Diagnosis SD Connect Multiplexer? Below Autonumen.com share a Star Diagnostic SD Connect MB Star C4 Mux identify guide as following. This is sharing from MHHAuto forum, great Mercedes Star diagnostic SDconnect SD C4 tools experience sharing.

15.1

MHHAuto Thread: SD Connect C4 — avoiding garbage

I’m in the market for an SD connect C4 mercedes benz Star Diagnostic Tool and have been trying to spend my time doing some homework to avoid getting a garbage unit. I certainly can understand what a lot of people have been saying about the widely varying quality that’s out there. I am a EE and PCB designer, so I’m trying to make use of that knowledge to select the best unit that I can.

To that end, I’m going to share what info I’ve collected so far, and when I finally end up buying whatever unit I do, I’m going to do a full teardown on it and post the results here.

As another matter, I’ll openly post details on who I buy the unit from and impressions after receiving it.

Near as I can tell right now, there appear to be about 4 “factories” that make different units.

One thing I’ve been asking all of the sellers for (and I would encourage others to do the same) is photos of the actual MB Star C4 SD Connect unit (including PCBs) with a unique identifier in the photo to prove that the unit they say they are going to send me is the actual one they send me. Of course, some sellers immediately bail at this, but then you know who to avoid ahead of time.

In general, a lot of the components used in a Star diagnostic tool SD C4 Multiplexer are getting quite long in the tooth. Many of the parts are approaching 20 years of age. Thus, you stand a fair risk of getting pulls (used parts) and/or remarked parts on these.

In following posts, I’ll provide photos of what I can discern as differences between the MB Star Diagnostic SD Connect C4 units along with some commentary about whatever info I can provide at this point.

15.2

to, I’ve outlined some things I feel are important to note. They have a set of 4 analog switches on the PCB. In this photo, they are ADG426 from Analog Devices. I’ve seen some clones that use DG526CY from Harris/Intersil. The DG526CY, besides being completely obsolete, has an typical RDSON of 270 ohms vs 80 for the Analog Devices part. It also has a -55dB isolation vs -75dB for the AD part. In short, the AD part is just a much better mux. So with that said, I would insist on any unit I’m interested in using those.

A second thing you’ll notice is the use of can crystals where 4 pin variants were intended. This is just sloppy and cheap. There may also be issue with loading (and ultimately clock stability) depending on whether they matched the loading caps to the substituted crystal or not.

I haven’t had a set of photos high res enough to look at the rest of the actives in detail yet, as most sellers don’t seem to post them.

There’s also an issue pointed out on the bottom of the board where one of the (what appears to be) MOSFETs in (what appears to be a) D2 PAK looks like it was hand soldered. Again, no good.

This next photo is of the relay Star Diagnosis SD Connect PCB— I think one of the MHH members posted this from an original SD C4.

15.3

.5NU relays and EPCOS S513N chokes. I’ve seen plenty of PCBs where they remove the chokes and stub them out with 0 ohm resistors. That is a high crime in terms of signal integrity. You see a lot of “full chips” comments where these are present, although that is a bit of a misnomer. It should read as “common mode filters present”.

On this PCB, you’ll also notice the use of multilayer ceramic capacitors (MLCC) near the switching supplies. A lot of clones seem to use electrolytic capacitors in place of the bigger MLCCs because of the cost. MLCCs are preferred for switchers because of their low ESR. I really cannot comprehend why the clone makers skimp on these. Even in the US, in reel (e.g. 4K pcs) qty, a 47uF MLCC is about $0.20/ea. That means the difference of probably about $0.50 for the whole PCB. The other advantage of MLCCs is that they more or less last forever, whereas electrolytic caps will eventually dry out and fail (and who knows how old the ones you’re getting are and what the quality is to begin with).

In the upper right hand corner, you’ll see some footprints that weren’t solder pasted during stencil printing. To me, this is a good thing. You know what parts were intended to be populated and which were not. You also get a chance to examine the ENIG finish.

In the next photo, you’ll see the MPC5200 board. This is an 8 layer PCB.

15.4

There are a couple of things of note on this board:

(1) The AMD 10/100 ethernet PHY that’s used comes in 2 revisions and a few different temperature ratings. I have to check the details carefully between the rev A and B, but in terms of temp rating, this should be ‘I’ (industrial) vs ‘C’ (commercial).

These PHYs are ancient now, so any price difference should be minimal between the C and I version. Thus, again, I can’t imagine why anyone would try to save $0.01 and use the C version.

(2)(Anturage corrected me here — this header brings out USB, MII (Ethernet MAC), and some other signals)

(Will update below with the location of JTAG when I find it…)

The header at the lower left hand corner of the board is the JTAG header for the MPC5200. For PowerPC, they refer to this interface as BDM. I haven’t seen anyone talking about it on here, but this could be quite useful in some cases if/when the SDC is flaking out. For anyone who’s not familiar with this interface, it allows you to halt/breakpoint/single step the processor. You can also test the memory attached to the CPU etc. Unfortunately, on this MB Star Diagnosis SD Connect C4 particular PCB, some solder paste leaked through (although I’m not exactly sure how this could happen if I think about it…) onto a few of the pads.

(3) The memory chips are at the bottom. They’re DDR SDRAM (I made a mistake when I originally posted this, I wrote that they were not DDR, but upon closer inspection, they are). You can see the series termination resistors between the memory chips and the MPC5200. As others have pointed out, these should be identical and from the same date/lot code. These parts are plentiful and cheap as dirt, so there’s absolutely no excuse for any funny business there.

(4) The Spansion S29GL064N is a 64Mb (8MB) parallel NOR flash. Pretty standard for the time this unit was designed. This is what the MPC5200 boots from and where U-Boot, the RTOS, etc. live. You can dump and rewrite the contents of this flash via JTAG (mentioned above). These parts are still readily available and cheap.

You’ll notice on this MB Star C4 SD Connect PCB that right below the AMD PHY, there’s a 32KHz tuning fork crystal in a 4 pin package. This is the package that should have been used on the other PCB as well.

In general, this particular MB Star C4 SD Connect PCB looks to be of reasonably high quality.

The last photo that I have is of the LCD display.

I’ve seen a lot of different variants of this particular board.

There’s this example ‘FT-C4-LCD’. I’ve seen another ‘LCD V1.1’ variant as well.

The biggest thing with this board is that it’s a HASL (hot air solder level) finish. Granted, this is not the most complex PCB in the world by a long stretch, but it just goes to show you how for these companies will go to save every last penny. Although I haven’t seen the back side of one of the ‘FT-C4-LCD’ variants, the ‘LCD v1.1’ variant seems to use some ST microcontroller. Maybe the FT-C4-LCD has one on the back?

There’s nothing else particularly remarkable about this board, although my impression is that the higher quality units seem to use this FT-C4-LCD variant. If anyone has information to the contrary, I’d certainly appreciate knowing about it.

So as I’ve mentioned before, I’ve been sending these photos to any prospective sellers with MB Star C4 Mercedes Benz SD C4 units and asking them to address the issues I’ve pointed out here in writing.

If they either can’t or won’t, I just simply move on. I’m sure there are some people that will argue that I’m just wasting my time, but that’s fine, it’s my time to waste. I think if enough buyers start insisting on better quality up front, and stop buying garbage, it may encourage the factories to improve their quality in general.

To that end, I’m asking any seller each as eobdtool.com to guarantee, in writing, that I will receive exactly what we agreed upon up front, or that they will have to provide a full refund and pay return shipping. To be fair, I am willing to pay more for that. I’m not asking for a top shelf unit at a rock bottom price.

So for any sellers reading this that are interested, please post a note on here, as it may be of interest to others. No need to PM me. Any experience that I have with any seller, I will report back to on here fairly and accurately. I think anyone deserves a fair chance. At the same time, I will be completely honest and detailed about the entire experience, so please bear that in mind ahead of time. I would encourage others to do the same. I feel like this is one place where open communication will benefit everyone.

To any sellers that might be reading this:

Please understand that none of us want to buy a unit, have problems, and have to deal with sending back to China and playing games with you. All anyone wants is a high quality unit that will work reliably for years. It is better for you and for us to pay a little more up front and get a better quality product. Since you go to great lengths to obscure your production sources, it becomes your job to communicate to them that poor quality is not acceptable.

Any customer need good MB Star Diagnosis Tool MB Star C4 SD Connect Multiplexer SD C4 with guarantee, just contact us freely.


  • 0

Porsche Piwis Tester II FAQ

Q: Can you offer a best quality tool for making Porsche keys?
A: You can buy Piwis Tester ii, the online program keys function is supported.
Q: What is the requirements of computer system?
A: We  sell laptop together  with piwis  tester ii  generally. The  software is installed  on the  laptop by  the
factory. If you want to change the laptop after some time, you need to buy CF30 or CF31. Only these two
laptops are ok.
Q: There is a tab “9300” on the laptop, is the password to start laptop?
A: No, it is not. You can try “piwis-3456″ or “piwis-4567″.
Q: What is the piwis tester ii (item number: sp161-c) logo after start the software? Just like the or
iginal factory logo?
A: Yes, just like the original factory logo.
Q: What is the difference between SP161-C and SP161?
A: The  software function are the  same. But with different  laptop. The version  can be the same.  This is
analized via current phenomenon.
Q: What is the difference between SP161 hardware and SP161-C hardware?
A: The hardware is differenct but they can achieve  the same functions. SP161 is the copy version of the
original one, while SP161-C is developed via Allscanner.
Q: Porsche Piwis Tester II support Porsche before 2013? Does it support the newer Porsche?
A: It supports Porsche before 2013 year.The supported year between 2000 year to now, obd2 diagnostic interface
We do not test the older vehicles.
Q: Does Piwis Tester II contain HDD?
A: Yes, the software has been installed on the laptop.
Q: Does Piwis Tester II contain KTS520 software?
A: We do not know if there is KTS520 software in it, we do not test it. It should not be available of kts520.
We have KTS520 on our web, you can have a check.
Q: Porsche Piwis Tester II (item number: SP161)
1. The language default is Chinese after I start Piwis Tester ii, so I change it to English, but when I
restart it is Chinese again.
2. I would like  to have bios password, because after  start Piwis tester, sometimes after two  long
voice it keep at a interface and does not run diags.
I would like to confirm if it is the problem of ram.
A: Please send the ID beside the hard case to us, then connect the laptop with internet, because it needs
the factory to do authourization.
Q: Can Piwis Tester ii do offline program and code?
A: No, it only can do online program.
Q: If my laptop is broken, can I reinstall on another computer?
A: You need to change to another CF30 laptop, and the laptop needs to be activated via the factory.
Q: Can Piwis Tester II work alone? No need to connect with internet?
A: If diagnose the vehicles between year 2012, there is no need to connect with internet.
Q: Just some special function needs to connect with the internet?
A: Program funtion needs to connect with internet, and you should have online account.
Q: What is the password for opening CF-30 Laptop?
A: You can check the following picture, they are on the tab on the laptop.
piwis-3456
OR
piwis-4567
Sie  müssen   das Kennwort  nur  einmal  in  2  Monaten zu   ändern, oder piwis Tester wird   nicht
funktionieren.
Q: Can i buy just without laptop?
A: Yes, but you need to have CF-30 or CF-31, the other laptops are not ok.
Q: What’s the request  for computer when installing this software?i need  to connect to computer
when making diagnose?
A:   You need a professional windows XP system and need to connect to computer when diagnosing.
Q: How to accomplish Porsche Piwis Tester II online function?
A: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.
Q: How to handle with 90 days locking about Porsche Piwis Tester II?
A: Porsche Piwis Tester II timing is unlimited, always showing 90 days.
Q: How much software update charges for per year?
A: The first year software update fee is free.
Q: How to update ?
A: By CD or HDD .
Q: What is the current software version for Porsche Piwis Tester II?
A: Software Version: 13.7.
Q: If License area showing China or CN?
A: The License Area does not show China or CN.
Q: If there is manual available?
A: Yes. Provide electronic English manual for free. Please e-mail us to obtain it.
Q: If it is showing Porsche Logo when booting computer?
A: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.
Q: License Validity?
A: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

https://www.autonumen.com/goods-4738-Porsche+Piwis+Tester+II+with+CF30+Laptop+or+Lenovo+E49AL+Laptop.html


  • 0

Best Quality CAT Caterpillar ET Diagnostic Adapter III

2017A Version CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop (Real Caterpillar ET3 Adapter III)

5.1

we will install the software before ship, so you can get it work directly after you receive it.
2017A Cat ET software as Cat Caterpillar ET 2015A Software update version, 2017A Caterpillar Electronic Technician softwarer With Autel Tool CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2017.
Cat et Caterpillar Electronic Technician Software 2017A V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Caterpillar ET Software 2017A Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it’s best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)


  • 0

Solutions to MB SD Connect C4 Star Diagnosis problems

1. About computer system requirement

Q: Blue screen after insert MB SD Connect Compact 4 Star Dell D60 hard disk into the computer and open it.

A: Make sure Dell D630 computer is integrated video card and with 1GB memory, because the D630 of discrete video card is easy to have blue screen or shutdown and restart, restart and shutdown.

Q: When click “Diagnostic” to find “Fingerprint ID” of MB SD C4 2013.5, got an error” Internal error (3.17) – 3.89 You must contact the user help Desk “. (Shown picture below)

A: Check whether computer is compatible with SD C4 2013.05 software. If choose d630 hard disk, it needs to work with Dell D630 computer with integrated video card and 1GB memory; if choose movable hard disk, it’s requirement to the computer is: CPU 2.0GHZ or above, 2GB memory or more, Windows XP professional.

2. About languages available

Q: Is DAS available with 21 languages and optional to reset? Or only English available?

A: The DAS on the desktop is only English available, after enter into Xentry you are allowed to set the language you want. Just enter into Xentry whatever car models you want to diagnose, and if the car model should be diagnosed and programmed in the DAS but you enter Xentry, it will automatically switch into DAS and the DAS language will be as the same as the Xentry language.

3. About update

Q: MB SD C4 Connect Compact 4 Star 2013.03 update error: the software update was aborted. Please repeat the update process. (662)

A: do not update MB SD Connect Compact 4. You are allowed to update hardware version to 2.02, not 2.2.

4. About activation/code
Q1: When Setup SD connect Compact 4 hard disk, while got a message reading “No access authorization code! Please contact the Star diagnosis call center.

A1: It needs activation, please send us Hardware fingerprint, LAN-ID and HW-ID, then we will help you active.


  • 0

Porsche Piwis Tester II V15.6 with CF30 Laptop or Lenovo E49AL Laptop

Some of my customers let me recommended which auto diagnostic tool is good for Porsche , I recommend Porsche Piwis Tester ii for all of you who also have any request. By the way , we have a big promotion for it on this month , you can buy it with laptop , only need USD1188/set .

Piwis Tester II is the latest professional tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with latest tester for Porsche,powerful functions,full access .The latst software of it is V15.6 ,and can support multi-language , sucha as : Russian, English, French, Spanish, Italian, German, Portuguese, Japanese, Chinese, Dutch .

The systems which it can support as following :

ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Please check the FAQ for Porsche Piwis Tester II as bellow :

Q1: How to accomplish Porsche Piwis Tester II online function?

A1: Porsche Piwis Tester II online is via Team Viewer remote control, globally available.

Q2: How to handle with 90 days locking about Porsche Piwis Tester II?

A2: Porsche Piwis Tester II timing is unlimited, always showing 90 days.

Q3: How much software update charges for per year?

A3: The first year software update fee is free.

Q4: How to update Porsche Piwis Tester II?

A4: By CD or HDD. When you want update. you can contact with our customer service as well

Q5: If it is showing Porsche Logo when booting computer?

A5: Yes, CF-31R, CF30K are with Porsche Logo when booting computer.

Q6: License Validity?

A6: To support ONLINE function, valid certificate must be available for Porsche Piwis Tester II.

Q7: Where could get Laptop Power-on Password?

A7: Normally ours is piwis-3456, or piwis-4567. Or you can see the stickers on laptop. (Attached pic shows). If there is any problem, can contact customer service freely.

Now , how is your opinion for our porsche piwis tester ii ? Welcome to contact us any time .


  • 0

Newest BENZ Cars and Trucks diagostic tool MB SD Connect Compact 5

MB SD Connect Compact 5 is the newest and latest diagnostic tool for Mercedes Benz, it not only for cars, but also support trucks.   the software version is 2016.07

MB SD Connect Compact 5 Star Diagnosis support wireless diagnose,  support multi-language such as English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Croatian Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese  and more

it is good news ,  the MB STAR Diagnostic Tool mb star c5 support Offline and Online Programming, If You Want to Do Online, Please Buy This Online SCN Coding Service
Support Mercedes Benz Cars After Year 2000
Passenger Car Support List:
A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C
(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126), E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197), M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),
CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)
Van Support List:
MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)
Truck Support List:
Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series
Unimog Support List:
U20,  UGN,  UHN
Bus Support List:
TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,
Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400,
FURTHER MODEL SERIES
Super Sports Car Support List:
SLR(199)


  • 0

Newest JCB Electronic Service Tool Diagnostic Interface SM4.1.45.3

1.JCB Electronic Service Tool Diagnostic Interface
2.used for fast and effective fault finding, check maintenance standards, see if the machine has been abused, view and change machine set up data, flash ECUs with the correct data files.
3.Language:English, French, German, Italian, Portuguese, Spanish

JCB Electronic Service Tool Diagnostic Interface

Top 3 Reasons To Get JCB:

1. Software Version: SM4.1.45.3
2. Language:English, French, German, Italian, Portuguese, Spanish
3. Update By Email

Description:

You can reset EMS hours, edit speed limiters and use other functions what require special unlock.

Supported Models and Engines:

JS Range, JZ70, BackHoe Loader, Loadall 2007-, Loadall 2007+, Robot, Teletruk, Midi Excavator, Dump Truck, Fastrac 2000-3000 Series, Fastrac 8250 Series 1, Fastrac 8250 Series 2, Fastrac 7000 Series 1, Large Wheel Loading Shovels, Vibromax, JCB Dieselmax Engine, JCB Engine (IPU OEM), JCB Engine (Base Engine OEM), JCB Generators, LiveLink.

The JCB Service Master also provides several key features that will accompany all JCB projects, a multi language editing tool that provides a means of individual text string translation for all JCB applications and a means to select a localized language translation for the each JCB application.


  • 0

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

The old bluetooth cat et adatper iii has stopped production, and you may get the new WIFI CAT Caterpillar ET Diagnostic Interface adapter to replace it, autonumen.com has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.
4.1

WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

Car Diagnostic Tools CAT Communications Adapter III 317-7485 is the most current generation on the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is needed for some CAT ET (Electronic Technician) functions.

True 2015A Caterpillar ET3 Adapter III P/N 317-7485 Experienced Diagnostic Adapter for CAT from www.autonumen.com with WIFI

This can be the only encouraged communication device for Auto Repair Software CAT, and the only datalink device which will permit you to properly communicate having a CAT engine on dual datalinks.

Software version: 2015A

2015A Caterpillar ET3 Adapter III Communication:

1. Enables communication in between service tools and engine controls employing numerous data hyperlinks which include J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;

2. Flash plan permits adapter firmware upgrades as further features grow to be available;

3. Uses J1939/11, high-speed information link (a part of ADEM III controls), substantially lowering flash times;

4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to three minutes).

Should you be trying to find wireless diagnostic interface for cat engines, please you may pick this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter, and you will get 5% off discount should you order it now.