Monthly Archives: May 2019

  • May 28, 2019
  • 0

How to use JLR DOIP VCI SDD Pathfinder for Land Rover 2017 Par emilyzhang dans Accueil le 29 Avril 201

Tags :

Category : Original brand

What for Land Rover the 2017 year?

JLR DoIP VCI (original or china clone) running Pathfinder or SDD software
It’s verified to read and clear codes of Range Rover L405 2007. Worked good！

What is JLR DOIP VCI:

This is a unit compatible with Pathfinder / JLR SDD software and all JLR vehicles with new vehicle architectures (from Range Rover/Range Rover Sports (L405/L494) Year 2017 onwards) or allow the enhanced diagnostics that Pathfinder will offer the retailer. In addition to the 2017 vehicle line application, the DoIP VCI will be capable of interfacing with the 2014-2016 Multi-CAN architecture vehicle lines on the Pathfinder diagnostic system. Pre-2014 and vehicles not detailed here will continue to use the current diagnostic system and VCIs.

How to use Pathfinder software to read/clear fault codes:
Vehicle: Land Rover Range Rover L405 2007

Procedure:
Run Pathfinder
Enter user name and password to log in

Warnings:

To use this maintenance tool, you should agree with items below:
– you’ve already read Garage Maintenance User Guide, the first section “Basic information”
– know how to use this tool to perform PDI, maintenance, diagnostics, etc.
– only used for Jaguar Land Rover vehicles
– finish junior training of JLR diagnostic tools
– obey laws & rules of vehicle health and security in your areas
– obey all policies & procedures of the dealer repairing

Search your vehicle via VIN
Auto scan
Automatic ignition switch not supported
Click on OK

Vehicle information:
Land Rover Range Rover L405 (DoIP)
VIN: XXXXXXXX
YEAR: 2007
MILEAGE: 5804km
ENGINE: 306DT – V6 3.0 DIESEL
TRANSMISSION: Automatic
DRIVER: LHD (left-hand driver)
TYPE: 5 DOOR STATION WAGON
ACCESSORY: STANDARD
Go to ECU Diagnostics
Reading fault codes
Read All DTCs
Go to clear all DTCs
Then refresh DTCs
Done!

JLR DOIP VCI Car List: (14-16MY)
XE (X760)
F-Pace (X761)
F-Type (X152)
XF (X260)
XJ (X351) – 16MY only
Evoque (L538)
Discovery Sport (L550)
Range Rover (L405)
Range Rover Sport (L494)

Disclaimer: All about JLR DOIP VCI and Pathfinder here is China clone version. But it can works as good as the original.

  • May 28, 2019
  • 0

CGDI BMW AT-200 ECU Programmer & OBD ISN code reader

Tags :

Category : Uncategorized

BMW AT-200 ECU Programmer & OBD ISN code reader, imported product at cheaper price.

1.BMW ECU data read and write, clone (necessary for BMW ECU repair)
Effectively solve the second-hand ECU matching problem after the damage of the BMW ECU control unit. With CGDI BMW AT200, it can directly read the original car computer data and then clone it, it can read and write on almost all ECU types: MSV90 MSD85 MSD87 N20 N55 B38 B48 etc Engine clone.

Successfully made up the market for BMW ECU reading and writing equipment, saving high equipment costs

2.BMW IMMO ISN code reading via OBD(Necessary for car locksmith)
Can quickly solve the problem of data collection of BMW all keys lost, read and write without dismantling, which is more stable and more efficient.

If you want to program new key for BMW 3 Series, 5 Series, 7 Series , X5, X6, GT535, etc with six-cylinder engine, you must OBD read ISN code to program the key.

Can work with: Yanhua Digimaster3, CGDI BMW, VVDI, AP etc to program keys.

Save money: the same price of similar equipment is very expensive, around 60000USD.

This imported BMW AT200 is stable, high effective and easy-to-use because it passed through strict quality inspection.

Mercedes 271, Audi, Volkswagen 06J computer will be added in the next updates.

  • May 28, 2019
  • 0

V2017.9 Original Software Mercedes Benz MB SD C5 SD Connect Compact 5 Star Diagnosis with Engineer

Tags :

Category : MB Star

Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.can work on windows xp, win7/8/10 system.
15.1
Xentry Connect C5 Benz SD Connect DoIP Wifi MB Star C5 Xentry Tab Kit Diagnosis Multiplexer
Benz c5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
The tool we sell do not include the xentry tab, you can equip one yourself or choose other laptop, it is just as a display, no special requirement.
Xentry Connect (VCI+) Technical Parameters:
1.OS: Windows Embedded Standard 7(32bit)
2.Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
3.Memory: 4G hard disk with 256GB SSD
4.Display: 128*64 PX
5.Battery: 40 minutes (When CPU capacity to 60%)
6.Weight: 1.9KG
7.Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ
The way to connect: support wireless connection via 1000M workshop switches, also support wired connection.

What the difference on diagnostic systems based on Xentry Connect from other equipment used to diagnose Mercedes cars?
What are its distinguishing features?
Hardware, despite the similarity of many solutions with multiplexers SD Connect –
but the different All diagnostic software is loaded into the Xentry Connect multiplexer itself.
The management software can be installed on any computer with Windows 7 – 32-bit or Windows 8 – 32-bit and serves only for communication with the multiplexer
The licensing system is reworked – now licenses are stored on MB servers – Any license changes are tracked by the multiplexer when connected to the Internet network.
Why should buy Xentry connect
After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.
Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SD Connect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a “civilian” version – the Panasonic Toughbook CF-D1,
somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.
Honestly, the need to use the Xentry Tab on non-dealer services seems somewhat exaggerated to me. With dealers everything is clear – they were forced to use this equipment.
And what about workshop service? Undoubtedly, the tablet from Panasonic is not very bad … But … Its price is disheartening. The cost of the Japanese tablet is realistic to buy pieces of eight new laptops or tablets from other manufacturers.
So , we suggest buy Xentry connect from us , then buy a laptop yourself . the software from which Xentry Connect is managed can be installed without any problems on any computer that has a 32-bit version of Windows 7, Windows 8 or Windows 10. It’s clear with Xentry Connect itself – there’s no alternative .
After all, in this choice there are many reasons that encourage one to make a decision. The main thing is one: since 2015, the diagnostic multiplexer Xentry Connect C5 becomes the only one used at dealerships.
Thus, by purchasing this equipment, you do not lag behind the progress. You use in your work the best that is available today. Each your client, seeing with his own eyes that you in your work use the same device that he saw at the dealer’s service station, will understand that he made the right decision entrusting his car to your specialists.

  • May 28, 2019
  • 0

SuperOBD SKP-900 Key Programmer FAQ Collection

Tags :

Category : Auto key Programmer

SuperOBD SKP-900 Universal Key Programmer work on almost all vehicles in the world, specially good at Landrover and American cars after year 2006, but not so good for Japanese cars.

Super SKP-900 Frequently Asked Questions:

Q: How to update SKP-900
A: 1. Register on SuperOBD SKP-900 official website with dealer code 1001, finish it
2. We will upload the update file for you on the official website, then you can check it in “my update” when you once login the website, it usually need 2 days

Q: how I get more tokens?
A: SKP-900 is with 50 tokens, after you use up, you can go to the SKP-900 official website to get more. It is for free.

Q: this skp-900 CAN read pin code?
A: yes, SKP-900 can read pin code for many vehicles.

Q: what year this skp-900 cover?
A: skp-900 can do both old and new cars. year after 2006 is better.

Q: skp-900 supports all car key lost?
A: skp-900 supports all car key lost of some cars

Q: SKP-900 can program TOYOTA G CHIP?
A: yes, SKP-900 can program TOYOTA G CHIP

Publié dans auto key programmer

  • May 28, 2019
  • 0

Caterpillar SIS 2018 CAT SIS 2018

Tags :

Category : Heavy Duty Diagnostic

Caterpillar SIS 2018 CAT SIS 2018

There are 2 options for you to choose before order please:
1. Software is in a 320G hdd before shipment, the customers need to install it and active it in the laptop by themselves after receive the hdd.
2. Software would be installed well in a second hand dell d630 laptop before shipment, you could use it directly after you receive the dell D630 Laptop.

The Heavy Duty Diagnostic Caterpillar SIS 2018 (3D pictures) complete set contains the full information on spare parts, repair, electric circuits and etc. SIS has been tested using Microsoft Internet Explorer 5.5/6.0 on these platforms: Windows 2000 & Windows XP, VISTA and Windows 7.

Heavy Duty Diagnostic SIS is the electronic service tool that Caterpillar dealers, customers and employees rely on for their parts and service information needs. SIS provides information for all Caterpillar machines and engines from 1977. SIS is available on the Internet, DVDs and a network version based on the DVD standalone application.

SIS Web is updated continually and is the most complete and up to date version of SIS. SIS DVD and Network SIS use the same information that is located on the monthly data DVD’S. The time required to stage and ship the DVD’S to Dealer’s and Customer’s accounts for the delay in information that may be available from SIS DVD/Network.

SIS DVD is the standalone version of SIS and is required when the Caterpillar Inc. server for either SIS Web or the Dealer server for Network SIS is not available. Field Mechanics may be the largest group that uses SIS DVD. All three versions of SIS require an Internet Browser to display SIS information.

Caterpillar STW
The Service Technician Workbench is an integrated package of software tools, designed to assist the Caterpillar Service Technician during the machine repair process.

STW provides common installation of the following service software applications: STW Toolbar (STW Lauchpad), Service Information System (SIS), Cat Electronic Technician (Cat ET), CBT Component Based Troubleshooting (CBT), Technical Analisis I (TA1) & Technical Analisis II (TA2), and Service Report.

STW Features:
Allows user to send data from SIS, TA and Cat ET to an Electronic Service Report. All information about the repair is in one location.
Allows user to attach Cat ET Warranty Reports to the STW service report.
Allows user to attach digital photos to further document the repair.
A single source of support ? DDS Support Center
Electronic service reports are easier to archive than paper service reports.
Integration between Component Based Troubleshooting (CBT), Service Information System (SIS), Cat Electronic Technician (Cat ET), Flash File Search and Service Report.
The DBS Upload utility increases dealer efficiency by eliminating the need for the technician to re-type data into the service report, already created in DBS. This information is sent from DBS to STW to create a STW service report.

STW Lauchpad
The STW Launchpad allows to you: Conveniently launch Service Software Applications, Manage some common SIS/CBT preferences.

Families/Models/Prefixes
BROOM-ANGLE, SAHL BROOM, BCG
GENERATOR SET, 3516B, EDG
INDUSTRIAL ENGINE, C7.1, G9R
GENERATOR SET, C6.6, LC6
EXCAVATOR, 336F LH, LTP
MOTOR GRADER, 12M 3, N9F
MOTOR GRADER, 160M 3, N9L
ARTICULATED TRUCK, 725C, TFB
WHEEL TRACTOR-SCRAPER, 621K, WTL
ENGINE – MACHINE, C9.3, WYE
EXCAVATOR, M315D 2, CH3
GENERATOR SET, 3516B, JCY
HAMMER, B30, MAY
MOTOR GRADER, 140M 3, N9M
MOTOR GRADER, 12M 3 AWD, N9P
MOTOR GRADER, 12M 3, N9R
ENGINE – MACHINE, C9, SYE
PACKAGE, 3.4B IOPU, CJ3
BROOM-ANGLE, SAHL BROOM, H1W
GENERATOR SET, 3516C, JDH
EXCAVATOR, 336F LH, KGH
MARINE ENGINE, C140-16, P3P
ENGINE – MACHINE, C9, SSE
EJECTOR TRUCK, 730C, TFH
ARTICULATED TRUCK, 725C, LFB
MINI HYD EXCAVATOR, 300.9D, LJ2
MOTOR GRADER, 140M 3 AWD, N9J
EXCAVATOR, 336F H, NAJ
EXCAVATOR, 320E, SHX
WHEEL TRACTOR-SCRAPER, 627K LRC, WTN
BROOM-ANGLE, SAHL BROOM, BAW
EXCAVATOR, M317D 2, CH5
EXCAVATOR, 336E H, HDW
ARTICULATED TRUCK, 730C, LFF
EJECTOR TRUCK, 730C, LFH
MINI HYD EXCAVATOR, 301.7D, LJ4
MINI HYD EXCAVATOR, 302.7D, LJ7
MOTOR GRADER, 160M 3, N9E
ENGINE – MACHINE, C9.3, SYE
ARTICULATED TRUCK, 730C, TFF
WHEEL TRACTOR-SCRAPER, 627K, WTC
EXCAVATOR, 336E LH, JEA
MINI HYD EXCAVATOR, 302.4D, LJ6
MOTOR GRADER, 160M 3 AWD, N9T
ENGINE – MACHINE, C13, T4F
TRACK-TYPE TRACTOR, D6R, WBC
GENERATOR SET, 3516, JCW
MINI HYD EXCAVATOR, 301.4C, LJ3
MINI HYD EXCAVATOR, 302.2D, LJ5
MOTOR GRADER, 12M 3 AWD, N9B
MOTOR GRADER, 140M 3 AWD, N9G
MOTOR GRADER, 160M 3 AWD, N9K
WHEEL TRACTOR-SCRAPER, 621K, WTA
WHEEL TRACTOR-SCRAPER, 623K LRC, WTM
GENERATOR SET, 3516B, JDE
GENERATOR SET, 3516C, JDJ
EXCAVATOR, 336F LNH, MTW
MOTOR GRADER, 140M 3, N9D
EXCAVATOR, 336F LH, PFL
TRACK-TYPE TRACTOR, D6N OEM, SC6
ENGINE – MACHINE, C9.3, SSE
WHEEL TRACTOR-SCRAPER, 623K, WTB

STW Service Report
The STW Service Report is a tool to help you collect, report, and organize your service jobs.
– Allows for complete documentation of your repair.
– Reduce duplicate typing of Service Reports
– Easy to read
– Spell check

Easy integration with Dealer Business System (both DBS and DBSi):
Download header information from DBS
Upload service information to DBS after your job is completed

Collect information from other service tools, including:
Parts lists from SIS
ECM summaries and reports from Cat ET
Inspection lists from Technical Analysis (TA)

Component Based Troubleshooting
Component Based Troubleshooting (CBT) helps the technician troubleshoot symptoms and codes for Caterpillar engines and machines. After identifying a symptom, the technician is presented with a list of components that, if not operating properly, may cause the symptom. By using the information provided for each component, the technician can identify the root cause of the symptom and fix the problem. The technician is also presented with a list of available ECMs and codes for the selected model to troubleshoot diagnostic codes. In addition, CBT gives the technician links to related information for symptoms and codes in the Service Information System (SIS).

Total: (Caterpillar SIS 2018 )
Caterpillar Disc #1: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #2: ELECTRIC POWER GENERATION
Caterpillar Disc #3: MARINE ENGINES, PETROLEUM PRODUCTS, TRUCK ENGINES
Caterpillar Disc #4: INDUSTRIAL ENGINES
Caterpillar Disc #5: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #6: PIPELAYERS, TRACK TYPE TRACTORS
Caterpillar Disc #7: INTEGRATED TOOLCARRIERS, WHEEL TYPE LOADERS, WHEEL TRACTOR SCRAPERS
Caterpillar Disc #8: WHEEL TYPE LOADERS
Caterpillar Disc #9: ARTICULATED DUMP TRUCKS, LOAD HAUL DUMP, MACHINE CONTROL GUIDANCE PRODUCTS, OFF HIGHWAY TRUCKS, UNDERGROUND ARTICULATED TRUCKS, ON HIGHWAY TRUCKS
Caterpillar Disc #10: BACKHOE LOADERS, CHALLENGERS, COMBINES, MINI EXCAVATORS, SKID STEER LOADERS, TILLAGE, TELSCOPIC MATERIAL HANDLERS, WORK TOOLS
Caterpillar Disc #11: ASPHALT PAVERS, COLD PLANERS, COMPACTORS, MOTOR GRADERS, ROAD RECLAIMERS
Caterpillar Disc #12: EXCAVATORS
Caterpillar Disc #13: TRACK TYPE TRACTORS
Caterpillar Disc #14: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #15: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #16: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #17: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #18: EXCAVATORS, OEM PRODUCTS
Caterpillar Disc #19: EXCAVATORS, OEM PRODUCTS

  • May 21, 2019
  • 0

How to update Nexiq firmware with John Deere SA

Tags :

Category : Professional Diagnostic Tools

When I was doing experiments with my Nexiq clone (also called Xtruck) and John Deere Service Advisor(JDSA)…

Running the utility binload from the folder C:\Nexiq\Test.
Set checkbox – Enable automatic USB-Link firmware upgrade
and get firmware bin file.
Save original bin with other name (for recovery).

I copy the firmware bin from the program John Deere SA,
rename as original Nexiq bin name
and replace original – by that file.

Next, again start utility binload from the folder C:\Nexiq\Test
and have John Deere SA firmware in Nexiq.

I have test connection with 2CAN pin and read engine serial
but i don’t run program…
I could not do normal work program…

JDL adapter like Nexiq adapter…
In Nexiq new driver have new firmware version
I always update firmware and do not have problem…
Credits to Dmitry in the MH community

  • May 21, 2019
  • 0

2015A CAT ET 3 CAT Caterpillar ET diagnostic cat et III Functions

Tags :

Category : Heavy Duty Diagnostic

Real 2015A Caterpillar ET3 Adapter III P/N 317-7485 Professional Diagnostic Adapter for CAT with WIFI.CAT Caterpillar ET Diagnostic Adapter display status of all parameters, such as engine speed, Throttle position, timing advance, fuel flow, etc.CAT Caterpillar ET Wireless Diagnostic Adapter V2015 CAT Caterpillar ET III Diagnostic tool retrieve engine totals for fuel used, miles traveled, and hours Operated.

8.1

2015A Wifi Cat Caterpillar ET adapter iii functions:
1. Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program allows adapter firmware upgrades as additional features become available;
3. Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

Software Version: Caterpillar et 2015a (Package with no 2015A cat et key generator, customers need send information for factory to activation, thanks!!)

8.2

Operating System: Designed to run with Microsoft Windows XP or windows7 32bits

Recommended Configurations:

PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of available hard disk drive
DVD-ROM drive
15.4 inch XGA Screen (1280×1024 compatible)
Microsoft Windows™ 7 Professional
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)

8.3

USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.

CAT ET III Wireless Adapter 3 PCB Board Display:

8.4

Focus On OBD Tool Since 2008

Wechat/WhatsApp:(+86)15815514521

Email:service@autonumen.com

Website:www.autonumen.com

  • May 21, 2019
  • 0

BMW ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C 2016.07 Engineers Version

Tags :

Category : BMW ICOM

BMW ICOM A2+B+C is upgrade of BMW ICOM, ICOM A2 is Second generation of BMW ISTA Diagnose and programming system. Support both new and old BMW vehicles.

BMW ICOM A2:
Software Version : 2016.07
ISTA/D (ISID /DiagnosticISTA-D 3.55.31 ISTA-P 3.59.0.600
VIN: 2016.06.15

BMW ICOM :
1. Support Multi-language: American English, British English, German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Japanese, Korean, Thai, Simplified Chinese and Traditional Chinese

2. Hardware Version: ICOM Application-01.40.05
3. Support Vehicles: BMW Cars, BMW Motorcycle, Rolls-Royce, Mini Cooper
4. Support BMW All Series Diagnose and Programming

bmw icom scanner BMW ICOM A2+B+C Function:

* Interface A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols.
* Interface B – diagnostic via MOST bus, and have connection to A-interface via USB connection.
* Interface C – 20-pin cable for old models.

BMW ICOM A2+B+C Special Features Compared with ICOM :
* The modified ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments.
* To protect the MOST connector, the ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.
* The ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the ICOM A2 and makes storage in the engine compartment easier.

FAQ of ICOM A2:

Q1: Is there any diagnostic equipment can do BMW530 DA 2003 ? It is better in French
A1: Try to use the BMW ICOM A2

Q2: Does the BMW ICOM A2 have the installation manual?
A2: Inset the hard disk into the computer and input password BMW, you’ll find the installation manual.

Q3: BMW ICOM A2 (SP168-B) can do the BMW old car before 2000?
A3: You can do the old BMW car, if the car can not be done, then try for a few more cars

Q4: 2013 New BMW ICOM A2 + B + C Diagnostic & Programming Tool (SP168-B) can be programmed to control template EGS?
A4: Yes The entire vehicle control unit can be programmed

  • May 21, 2019
  • 0

MB Star C3 vs MB Star C4

Tags :

Category : MB Star

New Mercedes Benz Star C3 is a professional diagnostic tool specially for mercedes benz cars. Mercedes Benz Star C3 can do benz trucks and new types of mercedes cars.Super quality,Big aluminum box for package, easy to take at hand.XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to October of 2006, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

MB STAR C3 VS MB STAR C4：
12.1

12.2

MB SD Connect Compact 4 supports reading & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. MB SD Connect Compact 4 supports wireless diagnose, support K-line,CAN BUS and UDS protocol, fit all computers,with multi-language.

Many people on the internet all said the MB Star C3, C4 software is the same, C4 whit SD CONNECT also with this software, and for the hardware, C3,C4 is same function in diagnosing.For mercedes Benz, C3 and C4 also can do work, in my opnion, C4 work with all the benz and more than C3, but C3 can do benz truck very well, this is advantage for c3.C4 is much stronger in anti-interrupting ability, when C4 tests cars, it’s hard to influence by the environmenr outside, such as magnetic field，noise. C4 is much smaller in the appearance than C3.Benz compact 4 SD-Connect is a latest Benz wireless multiplexer. It will connect to the PC by wireless connection.The biggest difference, i think, is connection wiring mode, C3 need 232 port, but C4 can be used with network port, even wireless.Also, the price C3 and C4 is very different, now C3 is the half price fo C4 as far as I know. could you some guys add more infos? i want to know more, thanks.

https://www.autonumen.com/

  • May 14, 2019
  • 0

John Deere Service Advisor 4 Free Download

Tags :

Category : Professional Diagnostic Tools

Free download John Deere Service Advisor 4.2 software full (incl. John Deere Service Advisor  4.0 Agriculture, Construction and Forestry, Commercial and Consumer Equipment version):

John Deere Service Advisor v4.2.006 AG 02.2016 + CF 05.2016 + CCE 05.2016.rar

https://mega.nz/#!ZTZVVLSD!RwWIbUvhH1gXRTBujS-cThq1kWLwx2C1fUJD8eIewgM

John Deere Service Advisor 4.2 activator.rar

https://mega.nz/#!ADgl0YiC!yVtJgEPJrQC6sCaQYY1-QGzWRiwfZFLyYPlJhGgtw0M

Password: John Deere Service Advisor v4.2.006 AG 02.201613021973

Version: V 4.2.006
Year: 05.2016
Size: 168.36 GB
Region: All regions
Type: Service and Repair Information
Languages: English
Developer: John Deere
Brand: Agricultural Machines
Windows: Windows XP 32 bit, Windows 7 32 bit, Wnidows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit

Security: Unknown – YOU ARE TRYING ON YOUR OWN RISK
It’s a customer share @ jahacmm via mhhauto

YOU CAN HAVE John Deere Service Advisor Full CRACK BUT TESTED 100%:
John Deere Service Advisor for customers:
https://www.autonumen.com/goods-5236-John+Deere+Service+Advisor+EDL+V2+Electronic+Data+Link+Truck+Diagnostic+Kit.html
Tested by professionals
Verified to work with John Deere EDL V2 clone

Software confirmed:
John Deere Service Advisor 4.0 Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.
John Deere AG Management Solutions, Attachments, Backhoes, Combines and Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages, MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers, Sprayers, Sugar Cane Harvesters, Tillages, Tractors, Worksite Pro Attachments.
John Deere Service Advisor 2.8 CF (Construction and Forestry), workshop service manual, repair manual, diagnostic, electrical wiring diagram, hydraulic diagram John Deere.
John Deere Service Advisor 4.0 CCE (Commercial and Consumer Equipment)dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools, assemble and disassemble presented all models John Deere Construction Equipment and some models Hitachi, Euclid, Bell and Timberjack.

John Deere Service Advisor install: Tested & confirmed no issues on  Windows XP VMware via Win XP,Win 7,Win 8 and Win 10.  Tested software comes with HDD- NO NEED iinstall sw yourself; that is install HDD on your laptop and use it.

Next Page »

OBD2 Diagnostic Tool Links

OBD2 Scanner
Auto Diagnostic Tools
OBD2 Diagnostic Tools
Car Diagnostic Tools
Auto Scanner Tools
Autocom CDP
Auto key Programmer
Launch X431
Launch CRP123
CK100
BMW ICOM
VCS Auto Diagnostic Tool
ELM Family
Autoboss Tools
Autel Scanner
Heavy Duty Diagnostic Tools
VAG COM
Mileage Correction
MB Star C3
MB Star C4
autotool.us

Recent Posts

Archives

Categories

Pages