Monthly Archives: November 2017

  • 0

How to update Creader VIII CRP129 Online

Launch X431 Creader VIII CRP 129 is a comprehensive diagnostic tool well built, which not only supports the full function OBD2 and EOBD, but is also available for other functions 4 systems (engine, automatic transmission, anti braking system -Blocking and SRS) for models of cars.

Also, Creader VIII CRP129 support updating online, here I share with you the steps to update.
1 Visit  http://mycar.x431.com/pad/landingPageIndexCrv.action and click “Update Tool Download.”
2 Download and install “Launch Creader Update Tool” after finishing the installation, then run it.
3 Select the language (English, Chinese, French and Spanish available) the product serial number and input (marked on the back of the obd2 tool)
4 Click “Update” to enter the registration page, input E-mail and code register, and then click “Submit.”
5 Insert the TF card into the TF card reader, then insert the TF card into the computer.
6 Restart the “Launch Creader Update Tool”, select the file you need, or click “All”, then click “Download.”
7 After the download is complete, remove the TF card TF card reader and insert it into the slot Creader VIII, the power from the USB cable (ie Creader VIII connect with computer via cable) or vehicle plug (ie plugging the OBD2 connector with the vehicle’s diagnostic socket). And begin Creader, it appears a window immediately “updating the system – Update course,” and click “OK” to update.
Completed Note

Process of update can also be used to Creader VII + CRP123.


  • 0

2017 Newest version for mb star c5 with Super Engineering Software DTS monaco And Vediamo

MB star c5 newest software version is 2017.03 now . the mb strar c5 diagnostic tool support Benz cars, trucks, bus, passenger car and more.

mb stra c5 Super engineer software DTSmonaco  it can achieve separate programming, scan entire vehicle software code, read entire vehicle setting code data, It truly one-button operation, Keep entire vehicle data
19.1

Car Diagnostic Tools mb star c5 scanner tool support function as following:

1.unit for off-line programming

2.a key to off-set code

3.W166, cancel the programmed number of calculation method of urea, one perfect canceled all 166 urea system.

The new c s-series to the factory installed conversion:

4.222, 205 installing fragrance systems

5.2015, paragraph 212, changing traffic light permanently lit

6.212, 204, adding electric ear

7.222 205 HU5 traffic solution for DVD video

8.W164 closed recycling system

9.W205, retro atmosphere lamp

10.205, 222 adding electric ear electric trunk, the trunk kicking function

11.166, how to modify the gateway set up codes

12.166 meters finished degrees Fahrenheit to degrees Celsius

13.US standard maintenance mileage be set to the number of miles

14.164 disabled diesel particle filter regeneration system

15.166 canceled urea

16.205 added electric rear vision mirror

17.HU45 regional Chinese resolve lock

18.W204 W166 foldable rear-view mirror

19.change the 166 on board, display in Celsius

20.W212 disable ECO configurations

21.activate the HOLD function ABR2XT

22.open W22 looked up appears

23.the AMG sports package enabled W212

24.the air bag computer reset factory State W166

25.to increase the brightness of the color instrument cluster s W222

26.22.97g to install the steering wheel shift paddles

27.W221 AMG W216 dashboard style

28.airbag ECU unlock W204 212

29.disabled child seat recognition sensors W221

30.opening rear fog lamps as spare brake lights with W222

31.increasing engine power MED177

19.2


  • 0

To understand much more about mb star c5

You recognize, Star diagnostic multiplexer, it doesn’t matter Car Diagnostic Tools c3 or c4, needs a laptop having a fairly certain set of COM ports you must use for it to work. By way of example you may need to have DAS to commonly be around the lookout at COMx all through the VM session, then VMware needs to redirect that to COMx and that is a ‘physical’ serial port inside your equipment. And ideal right here I may well want to clearly show you the way to achieve COM putting within your laptop for star diagnostics

MB STAR C5 now has generally been intended and come to commonly be the most up-to-date version of devoted motor automobile diagnostic gadget for Benz automobiles. Usually, the capabilities of C4 and C5 Diagnostic Resource for Mercedes Benzare regularly precisely precisely precisely the same, but some accidental matters that get location to C4 have presently been solved by Autel Scanner C5. What’s lots quite a bit even more, the newest Benz car or truck or truck S-class is furthermore supported by BENZ C5 from Autonumen.com.

Being a matter of fact, the typical of your motherboard that is utilized together with the automotive diagnostics computer software is sort of significant, it influences the provider life within the gear, at the same time because the veracity and steadiness from the evaluation or programming results. Within this post is definitely an graphic of benz c4 motherboard which may perhaps perform as reference for you personally.

Here, to get a experienced repairman, a laptop computer system Dell D630 for the individual Star diagnosis would be a good choice for you personally; I signify, to buy star mux with Dell D630 from seller, pre-install application plan and all setting you need- much more painless..


  • 0

Lonsdor K518ISE key programmer info: user manual, update and test results

Lonsdor K518ISE key programmer, English version of Lonsdor K518, will soon be available in the end of this October. Professional locksmiths will take advantage of its wide coverage in key programming as well as odometer adjustment on more than 10 car brands. Lonsdor K518ISE is winner comparing with many similar tools because it comes with Volkswagen 4th 5th adapter and chip & remote detection module, besides it can program Toyota/Lexus smart key all key lost via OBD by working together with extra SKE-LT Smart Key Emulator.

Picture means a lot here is Auto key Programmer Lonsdor K518ISE full package:

7.1

Package list:

1* Portable Bag(big)
1*Main Host
1*Power Adaptor
1*USB Cable
1*Packing Bundle
1*OBD Test Cable
1*Extra Connector
1*User Manual
1*Portable Bag(small)
1*KPROG Adapter
1*RN-01 Board
1*E-01 Board
1*FS-01 Board
1*20P Cable
5*Backup Pin
1*Certificate

Attach Lonsdor K518ISE unit diagram:
7.2

As you can see, Lonsdor K518ISE is very nice and user-friendly, it has many nice features:

With big nice capacitive touch screen(3)

Allow user to screen shot by pressing power button (4) and volume down button (5) together.

Allow user to detect key frequency and recognize chip (11)

Source: http://www.eobdtool.co.uk/wholesale/lonsdor-k518ise-key-programmer.html

K518ISE Price: about 1200USD

K518ISE Update: online update on official site

Lonsdor K518ISE Tokens: Does not need Tokens

K518ISE Communicate method: via USB cable or WIFI (10m)

Lonsdor K518ISE capabilities:

Immobilization……OK
Odometer adjustment……OK
Built-in-in Volkswagen 4th 5th adapter……OK
Built-in Chip & remote detection module……OK

Lonsdor K518ISE key programmer can work on many high-end cars such as:

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
16 -New Maserati: smart key programming
16 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.

Lonsdor K518ISE immobilizer car list:

Europe:
Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,
Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,
Borgward

America:
Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Asia:
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,
Toyota, Shigaoka Queen

China:
Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car
models are included)

Lonsdor K518ISE odometer adjustment car list:

VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…
Note: more high-end cars will be updated very soon.


  • 0

Lonsdor K518ISE Program Audi Q3 2013 Smart Key

Here’s the basic guide to program Audi Q3 2013 smart key with Lonsdor K518ISE key programmer.

Function

1. Backup EPROM: backup car EPROM data;

2. Restore EPROM: copy the backed up EPROM data onto the car computer, to restore it to the original state;

3. Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;

4. Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;

5. Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;

6. Delete key: delete the programmed key;

7. Reset dashboard

8. Odometer adjustment: to correct mileage;

Attention

1. During all the system operation, the dashboard will be in the extinguished state, that is normal;

2. Delete key process:

Step 1. Read immo data; Step 2. Select an existing key; Step 3. Write back immo data.

Reference

Chip model: Dedicated 48 chip

Remote type: 220G 315 frequency

Key embryo no.: No.31

PIN code requirement: Backup EPROM data

Remote generation: Program smart key complete, remote will automatically generated

Operation
Backup EPROM

1. This function can read the device EPROM data and save in K518ISE;

2. For smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;

3. The system read out the part number, now is going through security certification, and loading external code;

4. Getting system data, it takes about 2 min, please be patient;

5. Read the vehicle PIN code and other info;

6. Please enter the file name to be saved;

7. EPROM data is saved.

Restore EPROM

1. Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via Auto key Programmer Lonsdor K518ISE;

2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;

3. The system read out the part number, now is going through security certification, and loading external code;

4. Please confirm the current data is the car EPROM data;

5. Writing EPROM data, about 2 minutes, please be patient;

6. Resetting the dashboard, EPROM data is restored.

Make dealer key

1. This function can generate a dealer key to be programmed, then use this key to perform “Add key” operation;

2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;

3. The system read out the part number, now is going through security certification, and loading external code;

4. Getting system data, it takes about 2 min, please be patient;

5. Please choose to vehicle brand;

6. Please insert the blank key to be programmed into the K518ISE card slot;

7. Make dealer key success.

Add key (OBD)

1. This system is suitable for directly programming smart card dealer key.

Directly add key(suitable for folding dealer key directly programming)

1. This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;

2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;

3. The system read out the part number, now is going through security certification, and loading external code;

4. Getting system data, it takes about 2 min, please be patient;

5. Writing immodata, about 2 minutes, please be patient;

6. Add key complete.

Delete key

1. This function can delete an existing key;

2.The process of this function:

Step 1. Read anti-theft data Step 2. Select an existed key Step 3. Write back immodata;

3. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;

4. The system read out the part number, now is going through security certification, and loading external code;

5. Getting system data, it takes about 2 min, please be patient;

6. Please select the key to be deleted;

7. System communicating, delete complete.

Reset dashboard

1. Establishing communication, the system is resetting the dashboard;

2. Reset complete.

Odometer adjustment

1. This process can read and calibrate the odometer mileage;

2. if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;

3. Read the current mileage;

4. Going through security certification and loading external code, getting data, it takes about 2 minutes;

5. Please enter the new mileage needed to be calibrated ;

6. During writing… write complete.


  • 0

Launch CRP Touch Pro vs. CRP129 vs. Autel MD802

The Launch CRP TOUCH Pro is a full system diagnostic scan tool that runs on the Android.  Derived from Car Diagnostic Tools Launch x431 professional diagnostic platform, this full-function scan tool offers a complete OEM-specific coverage for 76 systems on 46 domestic, Asian and European makes  including all software upgrades and instant technical response with the data logging function.
25.1

Launch X431 CRP Touch Pro Highlights:
Operating System: Android
Language: English, Spanish & French
WiFi enabled for Web Browsing
Graph multiple PIDs of Live data
5” inch high resolution touch screen
One-touch vehicle identification, access All Vehicle Systems for Reading and Clearing Codes & Live Data
Modular software updatable
Battery Management Registration
Android Based- load your favourite apps
Extensive Pre-OBDII vehicle compatibility
Rugged, Padded Storage Case
GOLO ready! Remote diagnostics & telematics
Launch CRP Touch Pro Function:
1. Electronic Parking Brake (EPB),
2. Steering Angle Sensor (SAS),
3. Oil light Resets,
4. Diesel Particulate Filter (DPF) service,
5. Tire Pressure Monitoring System (TPMS)
6. Battery Management Registration
25.2
25.3
Launch CRP Touch Pro Vehicle Coverage:
Chrysler, Ford, GM, EOBD,Acura, Daewoo, Ford (Australia), Holden, Honda, Hyunday, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, Toyota,Alfa Romeo, Audi, Citreon, Dacia, Fiat, Ford (Europe), Jaguar, Lancia, Landrover, Mercedes, Mini, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW
Autel EBS301 vs.Autel OLS301 vs.Launch CRP129 vs. Maxicheck Pro vs. Autel MD802 vs. Launch CRP Touch vs. Launch CRP Touch Pro
25.4


  • 0

Solution about MB STAR C4, MB STAR C5 Update and can not test vehicles problems

Make sure your computer hardware version is higher the mb star c4 or mb star c5 version, otherwise, CSD will show update failed . Bootimage can update successfully. The following picture show how to check the mb star c4 or mb star c5 version1
20.1

The following picture is show your computer hardware HDD software version66
20.2

If their software is not same, it no need update ( because factory has upgraded the latest version of the mb star c4 or mb star c5 machine)

If customer not use our HDD software, it will appear read vehicle failed problems.

Solution as following

(1) Car Diagnostic Tools Mb star c4 or mb star c5 supply power to confirm the machine was turn on, like the following picture ( If now show the three icon, it means the mb star c4 or c5 main unit is broken)

20.3

(2). connect LAN with computer, confirm computer IP change to172.29.127.118, like the following picture :

20.4

(3)  change of software using pattern (Because you modify the software for the firmware upgrade mode, the software is not test the vehicles)The following picture is show the software is upgrade mode
20.5

The following picture is show test read vehicle mode.

20.6

Three files name Update_automaticx , Update_manualx ; Update_SpecialxThis is read vehicle mode, if can not read vehicle, please change files name, then restart computer


  • 0

What’s the difference Between MB SD C4 and MB SD Connect Compact 5 Diagnostic Tool

New Mercedes Benz WIFI MB SD Connect Compact 5 diagnostic tool for cars and trucks with/without software are available in Autonumen.com
Top features of the new MB SD C5
1. Support wifi
2. Supported Multi-Language: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/
Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese
3. Supports Mercedes Benz Cars & Trucks 2000 up
4. Supports Offline and Online Programming, If You Want to Do Online, Please Buy This Online SCN Coding Service
Software includes: (Version: 2016.05)
1. D-A-S / Xentry 2016.05 : the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car system testing
2. W-I-S net 2015.12: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3. EPC.net : Electronic Parts Catalog
4. ST Finder 2008:Part location finder
5. STARUTILITIES : the movement management system and self-test
6, SDMEDIA 2014
7, PL69


  • 0

What’s the difference between MB SD C4 and MB SD C5

New Mercedes Benz WIFI MB SD Connect Compact 5 diagnostic tool for cars and trucks with/without software are available in mbstartool.com.

Top features of the new MB SD C5
1. Support wifi
2. Supported Multi-Language: English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/
Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese
3. Supports Mercedes Benz Cars & Trucks 2000 up
4. Supports Offline and Online Programming, If You Want to Do Online, Please Buy This Online SCN Coding Service

Software includes: (Version: 2015.12)
1. D-A-S / Xentry 2015.12 : the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car system testing
2. W-I-S net 2015.12: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3. EPC.net : Electronic Parts Catalog
4. ST Finder 2008:Part location finder
5. STARUTILITIES : the movement management system and self-test
6, SDMEDIA 2014
7, PL69

The difference between the new Car Diagnostic Tools MB SD Connect C5 and SDConnect 4

MB SD Connect Compact 5 performs the same function as MB SD Connect C4 with newer design. Other features are exactly the same as MB SD C4. The new MB SD Connect 5 is cheaper in price than sdconnect c4.

Autonumen.com MB SD Connect Compact 5 Supported Vehicle List:
Supports Mercedes Benz Cars After Year 2000

Passenger Car Supported List:

A(176),  A(169),  A(168),  B(246),  B(245),  CLC(117),  C(204)  C(203),  C(202),  190(201),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),  S(220),  S(140),  S(126),
E(207),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),  CL(215),  CL(140)  SLK(172),  SLK(171),  SLK(170),  SL(231),  SL(230),  SL(129),  SL(107),  SLS(197),
M(166),  M(164),  M(163),  G(463),  G(461),  E(212),  E(211),  E(210),  124(124),  S(222),  S(221),S(220),  S(140),  CLK(209),  CLK(208),  CLS(218),  CLS(219),  CL(216),
CL(215),  CL(140),  SLK(172),  SL(231),  SL(230),  SL(129),  SL(107),SLS(197),  M(166),  M(164),  M(163),  G(460),  GL(164),  GLK(204),  R(251)
Van Supported List:

MB 100(631),  T1,  SprinterIII,  SprinterII,  SprinterI,  Sprinter900,  Citan,  Vito(639),  Vito(638), V(638),   Viano(639),  T2,  Vario,  Vaneo(414)

Truck Supported List:

Actros963/4,  Actros2,3,  AtegoIII,  AtegoII,  AxorII,  Eonic,  Zetros,  Actros,  Atego Light,  Atego Heavey,  HPN M96,  Atron,  HPN M2000,  SKL,  FSK,  Further model series

Unimog Supported List:

U20,  UGN,  UHN

Bus Supported List:

TRAVEGO,  INTOURO,  INTEGRO,  CITARO,  CAPACITY,  CITO,  TOURISMO,  O350/O403, CONECTO,  O404,  O405-O408,
Minibus,  OC500,  TOURO,  TOURINO,  MBC,  MULITEGO,  O500,  O500/OH,  OH,  OH368,  OF,  OF384,  LO,  O400,
FURTHER MODEL SERIES

Super Sports Car Supported List:

SLR(199)

loading..


  • 0

Lonsdor K518ISE program Volvo XC60 smart key

Lonsdor K518ISE key programmer is tested able to add Volvo XC60 smart key and program new keys when all key lost via OBD. Lonsdor K518ISE will bring professional locksmiths a cost-effective choice comparing with the 4s shops who charge a higher cost.

Tools and adapter to prepare:

Lonsdor K518ISE key programmer

RN-01

FS-01 probe board

Before programming Volvo XC60 key, you need to read the security data of two modules (CEM module and KVM module), then directly add the key or program new keys via OBD.

Part 1: Read the security data of two modules:

CEM module (behind the storage box of co-pilot)
KVM module (right side of the trunk)

There are two kinds of smart keys: 5 keys and 6 keys, both are 433MHZ frequency.

For 5 keys, before programming key, dismantle the CEM module and read the security data to backup.

For 6 keys, before programming key, dismantle both the CEM and KVM modules and read the security data to backup.

When we read CEM and KVM security data to backup, we need to use accessories of the adapter, RN-01 and FS-01 probe board.

Note:
First time to use the adapter, we need to bind it with Auto key Programmer K518ISE. Go to
the K518ISE home page and choose “Settings -> binding adapter”,
following the direction to finish binding.

One K518ISE host can
bind up to 5 adapters, and the bound adapter cannot be bound to other
K518ISE hosts. Once bounded, no need to bind again.

Guide: How to read CEM security data

Volvo’s
CEM are located under the co-pilot airbag on the left, remove the
debris box, the new/old CEM box look the same, but with
different circuits).

Read CEM data with RN-01 board:

Plug K518ISE host, adapter, and RN-01 board shown as below:

For
the old version, when opening the lid, in the back of the circuit
board, please pay attention to the black column with blue circles, which
are the four positioning points that need to match stably with the
white column of RN-01 board.

Note: The circuit board is
coated with insulating glue, it is required to use the washing plate
water to wash off the blue area of the insulation coating in the contact
point (solder joint) , or power can not go through , if the needle of
RN-01 board is broken, it will do to wire in the corresponding
locations.

For
the new version, the circuit is different, which requires to wire to
read the anti-theft data, please refer to following guides to wire:

Note:
Connect power to read the data, it is needed to separate RN-01 board to
the motherboard to prevent conduction; it is recommended that welding
line should not exceed 15cm.

How to Read KVM security data:

Volvo’s
KVM modules are located after the rear box, in the upside of the right
rear wheel position(for 16 S60L car, it is recommended to dismantle from
the right rear door to the wheel direction);

After
opening the module cover, it is firstly needed to use the washing plate
water to wash off the blue area of the insulation coating, or power can
not go through.

Read KVM data with FS-01 board:

The positions in red circle are the 8-pin insertion points of FS-01 board:

The connection among the K518ISE host, adapter and FS-01 board:

Important Notes:

The reason why a part of the failures in Volvo KVM data reading because the chip model is different, then please do as below:

① Use programmer to read out the data (.bin file);


Please contact and send the EEPROM data to K518ISE after-sales service,
the engineers will convert the data into a dedicated file;

③ Connect K518ISE with computer and put the dedicated file into “file —> feature_35″ folder;

④ Following the operations to select the KVM data from the process.

Tips

For 6 keys, during operation, you need to firstlyinsert the key into the key slot and then operate by following the directions.
For
key recognition failure, please make sure the smart key is not locked,
as locked key cannot be programmed, the fresh new key generally will not
be locked.
K518ISE
has identification & unlock functions, which will test and identify
whether a key is an unused one or not. If the remote control is invalid
after the key is programmed (on condition that the battery
is well installed and the remote control frequency is correct), try to
import the CEM security data to unlock the key and then program again.

Note: Only the key of this car or corresponding car can be unlock after reading the CEM security data.

4,When
installing Volvo battery, please note that the two batteries are placed
in an overlap way and separated by a white paper in the middle, so
please do not just replace the above one.

Dismantling is also very
simple, just remove the metal key, and gently pry with a not so sharp
knife in the same place where the metal key lies.