Monthly Archives: May 2017

  • 0


Category : Uncategorized



Does anyone know where can purchase the Maserati SD3 DIAGNOSTIC TOOL ? Welcome to choose . Lets talk something for this tool .

Maserati SD3 Diagnostics System is an electronic device for the diagnostics of electronic control units (ECU) installed in all modern vehicles.

The SD3 diagnostics tool operates on a palmtop device with a black color LCD display and a membrane keypad with twenty keys.

Self testing

To quickly check that the device is functional, connect the power supply (for example, with the cord and the mains power supply), press the power button and check that the led lights up. Within 20/30 seconds the start icon appears on the display.

The SD3 diagnostics tool has a resettable fuse. If it is activated because of an internal fault or due to the external cabling, wait a few minutes to allow it to reset. If, when you switch on the SD3, the display does not light up, wait a few minutes and repeat the procedure.

SD3 diagnostics tool support languages : English, French, Spanish, German, Italian

Part of software display :


  • 0

Solution for Alldata File Corrupted error notice

Solution for Alldata File Corrupted error notice:

1.If you meet this error notice when you double click Alldata icon on the desktop:

2.Right click Alldata icon on the desktop-select Properties-Find Target-



3.Click Mobile Hard Disk-01.alldata 10.53\AllData.10.52_Crack.only -alldata 10.52 3Q12 Folder

, Copy Ace.exe( it’s 2288KB)

Paste and replace the Ace.exe file on the C:\ALLDATAW

4.After replace, alldata program on the desktop can work normally

  • 0

How to use MB SD Connect Compact 4 Star Diagnosis Technical Service ?

How to use MB SD Connect Compact 4 Star Diagnosis Technical Service ?
Step1: sd connect 4 internet protocol properties ip address1


Step2: sd connect 4 configuration change2


Step 3: sd connect 4 mux register configure setting3

Step 4: select the name for sdconnect
Step 5: sd connect 4 wlan parameter road setting4

Step 6: sd connect tool kit device configuration5

MB SD Connect C4 FAQ:
Q: when insert SD Compact 4 disk into computer, there are one error happens, reading “A disk read error occurred, Press Ctrl
+ Alt + Del to restart…”
A: disk it not well connected or the disk is broken.6


Q: when I setup SD compact 4 disk, it asks for access authorization code as the following picture shows, how to do?
A: Because you didn’t active it, just send us activation ID and we will help you active.7


Q: can MB SD compact 4 support SCN coding?
A:our SD C4 support offline programming, but our software doesn’t support, you have to spend money to open this function.
MB SD Connect Compact 4 Star Diagnosis download
Please take easy to download our available attachments, these downloading link don’t contains attacking virus,they are safe to
your cumputer. If the anti-virus software test any of our attachment (especially .exe .zip .rar) containing virus,take easy, please
uninstall or exit anti-virus software before download files, otherwise these .exe .zip files may be attacked/broken before you
run them.
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the
software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or
install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners
confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer
service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or
it will fail to work.

  • 0

DIY Modify R270 BDM Programmer to Erase 35080vp

DIY Modify R270 BDM Programmer to Erase 35080vp

I have a R270 BDM Programmer R270+, my problem is that it
reads the 35080vp chip but it can not erase it, it gives me
error. I ask because all of bought read 35080 and cas but not
erase 35080. how to solve the problem?

Customer Solutions:
Sometimes vp don’t erase just replace the chip

Solution 1:
I played a few hours with my R270 Programmer, and I succeed to
make it erase 35080v6/vp in a few minutes.
First I changed 7805 with L7805CV, before voltage was 4.94v,
after that is 5.02v, but nothing happens, still can’t erase
more than hour.
after that i start to play 35080 PCB, and in the end started
to erase 35080v6/vp after 74HC125 changed with 74HCT125M, erase 5-10 min tryed on 3 chips, mayb if i change 74HC00 will be better, but i haven’t one for try.


Solution 2:
R270 M35080 v/vp not read/erase
1. Change the power supply to good quality: 12V 1.5A
2. Change capacitor


3. Change Resistor


Test working 100% by me. you are at your risk.

  • 0

MongoosePro GM with Strong Functions

New Arrived MongoosePro GM with Strong Functions


Good news for GM vehicles , GM MongoosePro replace the MDI to work with GDS2 and Tech2Win, can do the same function which including reprogramming .


So whats the advantages of GM MongoosePro ? Please check as bellow :

GM Mongoose Pro workable motor vehicle models

GM Mongoose Pro only works with GM automobile models.

Please examine extra GM Mongoose Pro supported protocols as follows:

a.Important Characteristics: Support for GM TIS2WEB Programming

software program

USB Diagnostics instrument for CAN, J1850VPW, and Single-Wire

CAN vehicles

Basic package deal with electronics contained within the cable.

b.Bus Protocols

CAN Bus (capable of ISO 15765, GMLAN, J1939, and ISO14229) J1850VPW / GM Class two Single Wire CAN


J2534 and J2534-1 compliant gadget driver

Industrial Variety (0 to 70 C)

Dimensions: 3inch x one.75inch

Operating Voltage: Bus-powered by USB

Host Interface: Full-speed twelve mbps USB two.0 with J2534 device driver


Some FAQ for GM Mongoose Pro as following :

1.Can GM Mongoose Pro assistance programming?

Yes, GM Mongoose Pro supports all module flash programming and

security process programming, and as compared to GM Tech2, GM

Mongoose have to have no get one particular a lot more tool.


2.Why MongoosePro II can support GM GDS2 & Tech2Win?

GDS2 & Tech2Win can support different VCIs (Vehicle Communication Interface) based on D-PDU standard, such  as GM MDI, Bosch MVCI, …, GDS2 can recognize the drivers of interface installed, so that the user can select the interface in the application, and make GDS2 to communicate with the ECUs of vehicle.


3.Why we say MongoosePro is the best choice for technicians?

Technician can use GM MDI, Bosch MVCI to work with GM dealer diagnostic application GDS2, but MongoosePro is the cheapest interface compared with others, the user can save money, moreover the clean design of MongoosePro GM II with electronics protected by cable is a maintenance free solution that allows user to avoid frequent damages on main diagnostic cable and the communication port of interface.


  • 0

Autel MaxiSys Pro MS908P Autel MS908 Pro

  • Autel MaxiSys Pro MS908P Autel MS908 Pro :
  • 20150106021448_51023
  • AUTEL MAXISYS Pro itself has already supported ECU programming function for BENZ and BMW cars, if you need to get support for more car models, you must use J2534 device along with OEM software to implement this function. J2534 DEVICE can not only use with AUTEL MAXISYS Pro , but also can work on other OEM software.
  • 20161129075826_69296
  • Using additional OEM software, the MaxiFlash Pro can be used as a Pass-Thru diagnostics tool as well, which allows users to read and clear Diagnostic Trouble Codes (DTCs) and data log PIDS, collect sensor data and log generic OBDII data etc.
  • AUTEL MaxiSYS Pro MS908P Software Advantage:
  • Open source Android Operating System for fast boot-up and multitasking
  • Easy and intuitive navigation makes finding what you need simple and fast
  • Displays live data in text, graph and analog for easy data review and analysis
  • Configure live data display options, set alarms, record, and playback data frames with one touch
  • Records and playbacks live data to pinpoint troubles of sensors and components
  • Cloud-based Data Manager saves customer and vehicle records, scanner data and technician notes
  • Remote technical support for convenient demonstration, training and increased customer satisfaction
  • Intelligent memory of vehicles for easy and quick diagnosis of tested vehicles
  • Prints out recorded data anytime and anywhere with Wi-Fi technology
  • AUTEL MaxiSYS Pro MS908 Pro FAQ:Q1:Can I use it to do gearbox programming of the Toyota MMT and Mitsubishi?
  • A1:Sorry, it can not.
  • Q2: Can I connect the MaxiSYS Pro MS908P with my car in other way? Such as
  • the bluetooth. Or I can only connect through the cable?
  • A1:The device include one Ipad with one diagnostic box. The diagnostic box
  • communicate with the Ipad by bluetooth. But diagnostic box need to connect cars by cable or connector.
  • Q3: Can I use the AUTEL MaxiSYS Pro MS908P to program the ECM module?
  • A3: Some cars can do. Some cars can not.
  • Q4: What is the difference between the AUTEL MaxiSys MS908 and the AUTEL
  • MaxiSYS Pro MS908P?
  • A4:AUTEL MaxiSYS Pro MS908P can do the programming function, while the
  • MS908 can not.